Ms. Seto Teknolog Pvt. Ltd. Mumbai, Maharashtra

The gps Based Clock that We Bring Firth is Used in Process Industries, Power Plants, Airports, all India Radio, Railway Stations, Doordarshan, Etc. for Synchronizing Time Data. the Gps Based Clock Can also Work Efficiently in the Absence of Satellite Signals By Using Rtc as Well as Oven Controlled Crystal Oscillator. specification master Clock Gps (optional Stand Alone Ocxo Based Unit)membrane Keypad for Configuration of Contactmultiple Slave Clock Drive Up to 1.2 Kmgps Time Synchronization to Pc, Lan Network (optional), Slave Clocks, Etcalarm Facility operating Voltage - 230 Vac, 50 Hzrs 232c, Rs485, Tcpip (optional) Interfacebuilt in Real Time Clockpotential Free Contact Output Pulse (1pps, 1ppm, 1pph, 1ppd)time Date Display (lcd)op Selection, Periodicity, Pulse Width - Local Time Setled Indication of Status (gps Healthy Modes of Operations Etc.)back Up Time Using High Accuracy (0.1, 1ppm) Oscillatorsdimension: 483mm X 355mm X 560mm digital Slave Clock remote Setting for Time Manual Time Set Through Remote Control (optional)ceiling Wall Mountingtime Synchronization with Master or Gps (in Standalone Mode)stand-alone Network Modeoperating Voltage - 230 Vac, 50 Hzsignal Driving Distance 1.2 Km Through Twisted Pair Communication Cable Used for Rs485 Linktime Display in Hh:mm:ss, (hh:mm)display Seven Segment Red (4" & 2" Digit, Any other Please Specify)multiple Slave Clock Connectivity, Extended Slave Clock Drive

The simulator Synchroscope that We Offer is Ideal for Synchronizing the Generator with Grid Placed in Simulator. We Receive Repeated Orders for the Simulator Synchroscope We Bring Forth as It is Composed in a Very Precise Manner. Also, We are One of the Renowned Manufacturers and Suppliers of Simulator Synchroscope. composed Of one Eight Bit Digital to Analog Converter (dac)stepper Motorthree Reflector Sensorspower Supply (240vac, 50hz)bridge Rectifierfilterstep Down Transformerlinear Regulatorsa Voltage to Frequency (vf) Converter8 Bit Micro-controllertwo Analog Multiplexersfour Driver Amplifiers technical Specifications stepper Motor to Drive the Synchroscope Facia of Suitable Torque, Voltage & Current.four Inputs to the Driver Unit ( 0 or 24vdc), direction Control (0v= Clockwise 24vdc = Anticlockwise).start Stop of Stepper Motor(0vdc = Stop 24vdc = Start).0-10 Rpm 0-200 Rpm(0vdc = 0-10 Rpm 24vdc = 0-200 Rpm).accuracy = ±0.2rpm for 0-10rpm & ±2rpm for 0-200rpm.power On Power Off (0vdc = Power On 24v Dc = Power Off)three Outputs (potential Free) Indicating the Position of the Pointer On Either Sides of 12’0 Clock Position Within a Band of 600.indicates the Position of the Pointer Within 00 to –300, (contact Closed = Pointer Within 00 to –300 Position contact Open = Pointer Within 00 to 3300 Position).indicates the Position of the Pointer Within 00 to +300, (contact Closed = Pointer Within 00 to +300 Positio contact Open = Pointer Within 300 to 3600 Position).potential Free Contact for Sensing the Position of the Pointer At 12’o Clock Position.accuracy of Potential Free Contacts = ± 20.one Analog Input Signal (0 -10vdc) for Driving the Synchroscope Needle At Various Speeds in Start and Various Positions in Stop.provision for Positioning the Pointer At 6’0 Clock Position, after Mains 240vac Power is Switched Offinputs At 0 Levelfollowing Connectors are Provided for External Connections, three Pin Allied Connector for 240vac Supplyone 15 Pin D-type Connector for 3 Inputs and 3 Potential Free Outputsone 9 Pin D-type Connector for One Analog Input (0-10vdc)test Points are Given for Checking the Healthiness of the Unitauxiliary Supply : 240vac, ± 10%, 50hzinsulation Resistance of Greater Than 100 Mega Ohms Between all Points and Chassisvoltage Proof Rating Will Be 1.5kv Between Ac Supply Line and Chassis.environmental and Operating Conditions :normal Operating Conditions-temperature : 20 – 550 C, Relative Humidity : 5 -95 %

We Offer Ac Voltage Transducer. The Voltage transducer converts a sinusoidal AC Voltage signal into an output signal that can serves several receiving instruments such as indicators, recorders, alarm units etc. The input Voltage is scaled down using a Voltage transformer T. The output of the transformer is rectified and filtered in a precision absolute amplifier A, incorporating integrated circuits. The amplified filtered output is proportional to R.M.S value of the sine wave input. The output is fed to a current converter 'C' to provide a load independent D.C. Current. Feature • Available in accuracy class index -0.2, 0.3, 0.5 & 1.0 • Withstands wide temperature variations. • VA burden on PT very low. - • Wide range of Input / Output to meet National / International requirements. • Comply to revised IEC 60688 (1997-10) standards. • Flexibility in auxiliary power supply requirements - A.C. / D.C. • Rugged and vibration resistant. • Withstands seismic test as per IEC 344-1974 for Nuclear Power applications. • Available in dust proof sheet plastic enclosures suitable for Back panel / Din rail mounting. • Multiple outputs also available - up to 4. • High input / Output isolation's - 4.0 KV.

We have Available with Us Digital Panel Meter Using Which One Can Easily Measure Basic Ac and Dc Electrical Parameters. the Digital Panel Meter is User Friendly in Nature and Has a Huge Demand all Across the Globe. Besides, the Digital Panel Meter is Used in Various Substations and I Industries. range Covered ammeterenergy Meterfrequency Metervoltmeterpower Meter specifications display : 4 1/2 Digits or 3 1/2 Digits Seven Segment Led Displaymeasurements voltage : Ac / Dcrange : 500v7300v/200v/20v/2vcurrent :ac / Dcrange : 10a/5a/2a/1a/0.1aisolation1.5 Kv / 1 Minute Between Line, Neutral & Earth500v Ac / 1 Minute Between Inputs & Earthinsulation Resistance At 500v Dc > 100 Between Above Terminalsv. Aux. Supply : 24v Dc / 48v Dc / 100-300v Dc / 85-265v Acspeed : 4800 / 9600 /19200 / 38400 Bps.size : 96 X 48 X 85 Mm Environmentaccuracy : +0.5% of Fsd.rs 485 : Mod Bus Rtu Protocol.communication : rs-485 ( 2 Wire )operating Temp : 0 55°c

The current Switch that We Deal in Monitors Loads in the Systems of Building Automation. the Current Switch Senses the Current for Monitoring the Power Condition. the System Lights to Indicate Closed Switch with Led. with Easy Adjustments, the Current Switch is Popular Amidst the Clients. features input / Output Isolation Via Current Transformertrue Digital Switching and No Leakagecompact Sizesolid-state Reliabilityself-powered and No Insertion Losseasy Field Adjustment with Status Led'ssolid, Reliable Mounting Method specifications insulation Class : 600vresponse Time: < 200 Ms Temp. Rating -25 to 60° C ( 0 to 150° F)wiring Connections : split Core - Screw Terminals (14 to 22 Awg)hysteresis : < 2% Fs Maxoperating Temperature : 0 to 70° C (32 to 160° F) Power Supply None-self-poweredset Point Range : 1. 5-200 for Sp Modelsjumper Amp-turns : low (none) 1-10, Medium 10-50

We Offer Battery Charge Monitor BCM-01 is a micro controller based unit, which is used for monitoring the charge level of stationary battery systems. This unit measures the voltage drop across a shunt through which the battery is connected to the charger and the load. The unit displays the charge remaining on the battery in terms of Ampere- Hour (AH) capacity as well as remaining time for which the battery can supply rated current. The unit incorporates precision analog and digital circuits and has the following features Feature Ø A settable low charge alarm Ø Display of the charge on the battery as AH and Remaining time for complete discharge. Ø Field Setting of the Rated battery capacity in AH. Ø Field setting of the shunt rating. Ø Remote Indication of fully charged Battery condition. Ø Soft calibration – no trimpots. Ø Optional- RS 485 Modbus link for PC connectivity. Ø Optional Ethernet connectivity for networking. Ø Operates directly from the battery being monitored. Ø User friendly LCD display messages. Ø Field setting of Battery efficiency.