Write a Review
Our Product / Services
Our product range contains a wide range of Rotary Drum Dryer Machine and Flash Dryer Machine
Rotary Drum Dryer is special designed to dry the wood material which combines the function of drying and cooling, so Rotary Drum Dryer can save 30-50% energy. The Rotary Dryer is made up of Stove, Main Rotary Body, Screw Conveyor, Cyclone Separator, Air-lock, and Fan and matched Pipes which can realize to reduce the moisture from 60%-10%.
After the damp raw material is put into the dryer from on end, it is turned over through string-up rake inside the cylinder and distributed uniform in the dryer and contacted with countercurrent hot air fully. It speeds up heat and mass conducting of dry. During the period of dry raw material is effected by stirring-up rake with gradient and hot air. it can be moved and passed through the dry region and to star valve and then discharge the finished product.
During the Drying Process, the best moisture content to pellet and briquette is about 13-15% and 11-12%, the function of the Rotary Drum Dryer is to make the crushed pieces with suitable moisture.
| Model No. | Purpose | Power Required |
| LRD - 1 | 750 kg/h | 17 HP |
| LRD - 2 | 1200 kg/h | 20 HP |
| LRD - 3 | 1800 kg/h | 32 HP |
| LRD - 4 | 3000 kg/h | 43 HP |
Flash Dryer is used to reduce moisture content from 25 % to 10 % which is suitable for briquetting. With the help of furnace, heat is henerated for drying the material. By screw conveyor, raw material is transported in to pneumatic conveyline in the presence of the hot air. Dried material is collected by cyclone.
Flash drying is a pre-process to densification much like grinding. Flash dryer is used for suspension drying of powdery, ground or granulated material such as saw dust, coir pith and Bagasse pith which are usually materials with moisture content of 35% of less. We also have flash drying technology available for drying of wet materials such as press mud, Bagasse (sugar cane stalk), distillery dry grain soluble (ddgs), spent wash and saw dust etc having moisture contents up to 60%. For that purpose, concentric column turbo dryer (CTD) is used.
Our basic turbo dryer system consists of Screw Conveyor, Feeding Hopper, Vane Guide, Conveying line including insulated drying column and conveyor through which wet or moist material is transported in the presence of hot air to the cyclone. A powerful low pressure centrifugal fan assures sufficient resilience time for complete removal of excess moisture. Material is discharged through cyclone by means of a Rotary Air Lock.
| Model No. | Purpose | Power Required |
| LFD300 | Single Pass | 4 HP |
| LFD1200 | Double Pass | 11 HP |
| LFD2500 | Four Pass | 21 HP |
Vishnu Arora (Shabnam Industries)
83/A, 3rd Cross,8 th Main,4th Phase, K.I.A.D.B,Bommasandra Industrial Area, Bangalore-560 099., Industrial Area B, Ludhiana, Punjab - 141003
Share us via
