Our Products
Specifications
Phosphoric acid (as H3PO4) | 85%(Wt) min |
---|---|
Acetic acid(as CH3COOH) | 3%(Wt) max |
Nitric acid(as HNO3) | 1%(Wt) max |
Sulphate (as SO4) | 0.01%(Wt) max |
Heavy Methal (as Pb) | 0.0002%(Wt) max |
Arsenic (as As) | 0.0004%(Wt) max |
Iron (as Fe) | 0.01%(Wt) max |
Appearance Transparent | colorless fluid |
Water | 15% max |
Specifications
Product Name | Hydrogen Peroxide (H2O2) | |
Concentration (± 0.5) | %w/w | 50 min. |
Density (at 25oC) | g/ml | 1.194 |
Acidity (as H2so4) | g/100ml | 0.06 max. |
Stability (mlo2/min./25ml) | ml./min. | 0.3 max. |
Specifications
Fe | 20ppm max | 30ppm max |
---|---|---|
Na2S | 60%min. | 60%min. |
Water Insolubles | 0.10%max. | 0.18%max. |
Na2CO3 | 1.80%max. | 1.80%max. |
Na2CO3 | 1.80%max. | 1.80%max. |
Na2CO3 | 2.00%max. | 2.00%max. |
Specifications
Glycerol Content | 99.5 min |
---|---|
Colour ( APHA ) | 10 max |
Ignition Residue ( % ) | 0.01 max |
Heavy Metals ( ppm ) | 5 max s |
Arsenic ( ppm ) | 1.5 max |
Specific Gravity ( 20/20oC ) | 1.2622 min |
Chloride ( % ) | 0.001 max |
Chlorinated Compound (ppm) | 30 max |
Fatty Acid & Ester | max 1ml of 0.5N NaOH Consumed |
Sulphate ( ppm ) | 20 max |
Moisture ( % ) | 0.5 max |
Appearance | Clear |
Technical Specifications
Identification | - | Colorless Crystals or White Crystalline Powders |
---|---|---|
Appearance of Solution | - | Pass Test |
Assay | - | Pass Test |
Sulphate | % | 99.5 ~101.0 |
Oxalate | PPM | ≤150 |
Heavy Metal (as Pb) | PPM | ≤150 |
Barium | PPM | ≤5 |
Calcium | - | Pass Test |
Iron | PPM | ≤200 |
Chloride | PPM | ≤10 |
Sulphated Ash | PPM | ≤50 |
Moisture | % | ≤0.05 |
Readily Carbonisable Substances | % | ≤8.8 |
Lead | - | Less than Standard |
As | PPM | ≤0.5 |
Mercury | PPM | ≤1 |
Aluminum | PPM | ≤1 |
Bacteria Endotoxin | PPM | ≤0.2 |
prganic Volatile Impurities | IU/ mg | ≤0.5 |
Tridodecylamine | - | Pass Test |
Ultraviolet Absorbance | PPM | ≤0.1 |