Our Products
FAD: 33, 0 - 43, 7m3/min 1166 - 1544cfm Pressure range: 8 - 13 bar 115 - 190 psig Motor range: 200 - 355kW 270 - 480HP
Motor ranges: 1.5 - 5.5 KW Free Air Delivery: 0.155 - 0.77 m3 /min
FAD: 185 - 1913 l/min 6, 5 - 68 cfm Pressure options: 10, 15 und 35 bar 150, 220 und 515 psig Motor size: 1, 5 - 15 kW 2 - 20 HP
A modular compressed air system to meet the requirements of your PET bottle application: BOGE FLEXPET has been designed for total flexibility and convenience. The individual components can be assembled on-site according to specific requirements and the prevailing site conditions.
A screw compressor generates air to 11 bar which is then dried to a
Pressure dew point of -40C. Boosters then make the required operating pressure up to a maximum of 40 bar. This pressure control saves energy.
Compressor spec:
Free air delivery: 99 to 1076 m3/h
Intelligent SavingMicroprocessorised load dependent regulation of DR series refrigerant dryers. Reduced quantity of refrigerantR 134a is the standard refrigerant used throughout the whole DR range. Unlike more traditional refrigerant dryers, the quantity required has been reduced considerably by up to 70%. Environmentally friendly BOGE refrigeration technologyAnyone involved in refrigeration technology, has a special responsibility. That is why when designing the DR series, right from the outset, a great deal of importance was attached to the environmentally friendly manufacture, operation and final waste-disposal of our refrigerant dryers.
Flow capacity: 0, 33 - 27, 5 m3/min 12 -972 cfm
Max. operating pressure: 16 bar 235 psig
THE AIRCOM QUICK LINE system is AIRCOM's latest development in the distribution of compressed air. It has been designed as a flexible instrument that can be integrated whith all existing systems in the world and is able to meet all needs, even in the most complex systems. The unions in AIRCOM's QUICK LINE series can be coupled with aluminium pipes as well as rigid PVC pipes, and can be perfectly integrated with all other AIRCOM product ranges. Quick to install, QUICK LINE still guarantees a perfect pneumatic seal, remarkable mechanical resistance and constant efficiency over time
Our PP-R pipes and fittings are made of high molecular weight Polypropylene Random copolymer suitably stabilized for high temperature applications and especially with high environmental stress cracking resistance that enables long service life.
Our PP-R pipes and fittings are manufactured in accordance with German DIN standards, the Raw materials used are Koylene ADL-CP AER003N are manufactured and supplied by Industries Limited.
This Raw material is recommended for manufacturing high pressure pipe lines.
Cyclone separators remove liquids, fine mists and solids from the compressed air.
Cost-efficient use of BOGE cyclone separatorsDirectly downstreamfrom the compressor
Flow capacity: 2, 20 - 65, 63 m3/min
Pre-filters separate out coarse impurities from the compressed air.BOGE pre-filters remove solids from compressed air with anefficiency of 99.925 % relative to1 m.
Cost-efficient use of BOGE pre-filtersUpstreamfrom compressed air dryer and micro-filter
Capacity: 36 -31248 m3/h
Microfilters separate out extremely fine impurities in the compressed air.BOGE microfilters remove solids from compressed air with an efficiency of 99.9999% relative to 0.01 m.
Cost-efficient use of BOGE microfiltersAs the main filter in the compressed air line or as an end-of-line filter upstream from
Activated carbon adsorbers are recommended for installation downstream of compressed air dryers with filters, in order to eliminate odour and clean any residual oil aerosols to 0.003 mg/m3.
The advantages of using the BOGE DC activated carbon adsorber
For safety reasons, it is recommended that a V seriesfilter should also be installed downstream (option), as very fine solid particles from the activated carbon bed may contaminate the compressed air.
Flow capacity: 8 - 950 m3/h 4 - 559 cfm
Max. operating pressure: 16 bar, 230 psig
THE AIRCOM QUICK LINE system is AIRCOM's latest development in the distribution of compressed air. It has been designed as a flexible instrument that can be integrated whith all existing systems in the world and is able to meet all needs, even in the most complex systems.The unions in AIRCOM's QUICK LINE series can be coupled with aluminium pipes as well as rigid PVC pipes, and can be perfectly integrated with all other AIRCOM product ranges.The AIRCOM QUICK LINE system is ideal for transporting compressed air up to a pressure of 13 bar. The product range (pipes, unions and fittings) can be used for creating complete systems, starting from the manufacturing unit to the handling, to the loop distribution system up to all peripheral couplings
NO COMPRESSED AIR LOSSESFloat operated drains only open when there is condensate to remove. That means that compressed air losses are avoided.
SIMPLE OPERATING PRINCIPLEFloat operated drains work very simply however they are more sensitive to dirtand require regular maintenance.
ZERO COMPRESSED AIR LOSSESAn electronic sensor ensures the drain only works when there is condensate to discharge this is done without any air losses. The intelligent electronic controller ensures loss free discharge and also monitors the condition of the drain.
CONTROL FUNCTIONAn LED display indicates the operating condition of the drain. A potential freecontact (not available in Bekomat 31) allows remote monitoring for highoperating safety.