Goodrive5000 series products are the new generation of high voltage variable frequency speed control systems manufactured by INVT, adopting power unit serial technology, DSP+FPGA+ARM 3-core technology for the control system and the most advanced high performance speed sensorless vector control mode compatible with SVPWM control, in features of high control precision, quick dynamic response, large low-frequency torque and dual-braking, etc. Besides, due to compact structure, the system can be installed against the wall with less maintenance, and its operating interface is more suitable for on-site applications. 1.It's easy switch between high performance open loop vector control and SVPWM(Space Vector Pulse Width Modulation) control by parameters setting; 2.It's easy switch between synchronous motor and asynchronous motor by parameters setting; 3.One drive more(Up to 8 motors for master-slave control; Downsize the equipment with one inverter driving multiple motors); 4.Strong overload capacity(120% of the rated current:120s, 150% of the rated current:5s, 200% of the rated current protect immediately); 5.Wide range of voltage fluctuation tolerance(Run normally when the grid voltage is in the range of -15%～+10%; Derate to run without stop when the voltage is 85%～65% of the rating or 110%～120% in a short time;AVR, automatically adjust output voltage according to bus voltage fluctuation);

iSVG series high-voltage static var generator is the latest third-generation reactive power compensation equipment. It is developed and produced by INVT and applicable for reactive power compensation and harmonic compensation.   iSVG series high-voltage static var generator has a self-commutated bridge circuit, which is composed of IGBT modules and is connected in parallel via electric reactor. The user is able to adjust the phase position and amplitude of AC output voltage in bridge circuit or control AC side current, so that the circuit absorbs or generates reactive current and realize dynamic reactive compensation. iSVG series adopts advanced chained topological structure, therefore, it supports redundancy operation and has high reliability. The control system has three cores (DSP+ FPGA+ARM) for digital processing; therefore, it features quick response, good self-protection and communication ability. iSVG series is easy to maintain via front maintenance structure design and helps to ease maintenance workload, and it can be installed against the wall to save floor space. Technical Features 1. Stable performance depending on chained topological structure 2. Quick response and stable operation because of tri-core processing system 3. Easy to maintain and small footprint 4. Prompt and precision data processing based on optical communication error identification patent 5. 17 protection functions for safe operation 6. Multiple I/O interfaces and friendly HM

• Max DC Input power (W)1000
• Staring Voltage (V)200

• FrequencyP15.05*P00.35

Firstly, read the operation manual, and then set the parameters as the last page in the manual, select the suitable column refer to the real situation. If removed the capacitors? Please remove the capacitors as the following photo, and make sure the resistor value U&V is the biggest OHM, U&W is the smallest value.

• Rated Power (W)750
• Max. AC Output Current(A)4.4

Kinway Technologies ML500 rapier loom main shaft servo (also known as super motor) uses permanent magnetic synchronous motor specifically developed for starting and stopping working condition of loom, which has the characteristics of correct orientation, quick start-up and convenient speed regulation. Comparing with original mechanical transmission system, it saves reduction gear box, and simplifies mechanical transmission level, meanwhile, it also reduces the malfunction generated due to mechanical tear and wear, and improves the reliability of the system, which can save energy by 10%~20% than conventional asynchronous motor system, and meet the requirements of upgrading rapier loom.   1. Main shaft of the loom uses servo motor direct driving pattern, comparing with asynchronous motor, it simplifies mechanical transmission level, and reduces the malfunctions generated due to mechanical tear and wear and improves the reliability of the system; 2. The servo is specifically designed for starting and stopping working situation of the loom, and overload capacity is more than 5 times, and it can save energy more than 30% than conventional system; 3. It is convenient for the system to regulate the speed, and MODBUS or CAN use parameters to quickly set and monitor operating situation; 4. Servo heat dissipation method is natural cooling or oil cooling, which is suitable for worse working environment of textile industry.  

EC100 series elevator intelligent integrated machine is an intelligent network product which combined the lift logic controller and drive technology.  With the advantages of advanced vector control technology, intelligent elevator control technology, network communication technology, and compatible with synchronous and asynchronous motor, it’s the high-efficiency and energy-saving lift controller, and reaches the highest level in domestic industry.   Technical Features 1. Maximum speed: 6m/s; number of floor: 64 floors at most 2. Group control for 8 elevators based on intelligent network management 3. Advanced space vector algorithm, compatible interface for synchronous and asynchronous motors 5. Excellent current vector control, zero-speed torque reaching 180% output capacity 6. AC220V single-phase UPS, low voltage emergency response mode, auto search for light load 7. Open-type PLG programming control allowing user to replace and change a part of input/output points and offering user a platform for second development and realizing the uniqueness of products. 8. Handheld exerciser with human-computer interface, online help in Chinese and English, debugging authority management, debugging trace management, parameters uploading and downloading, and data backup 9. Handheld exerciser can be connected to lift car control unit via CAN interface to achieve quick parameter setting 10. Support remote debugging or control by adding TCP/IP internet network module 11. Support remote monitoring based on TCP/IP protocol and support GSM/3G wireless monitoring.

1. Constant power wide speed range 2. Closed-loop control and servo control 3. Strong cutting force in low speed mode, and stable operation in high speed mode.   1. Smooth finish of workpiece surface. This motor has excellent speed rigid quality and maintains high rotational speed stability even in case of fluctuation of load, therefore, it enhances the smooth finish of workpiece surface. 2. Slight deformation of spindle. The rotor is made of rare earth permanent magnet, and it is free of exciting current and generates little heat. The spindle has good axial stability; therefore it achieves high machining precision.  3. Power and torque large. This rare earth permanent magnet motor has high power density and torque density. Given the same volume, the power and torque of this spindle motor is one grade higher than that of asynchronous motor. Given the same power, the torque is greatly larger than that of asynchronous motor, since the former is free of exciting current. 4. European-style design and small sizes. The bar-type spindle motor can be used at the places with small radial space for spindle; given the same power, the sizes of spindle motor is 30% smaller than that of asynchronous motor. 5. Wide speed range. This motor has a wide range of speed regulation and achieves stepless speed regulating from zero-speed to maximum speed; the constant power ratio is 1:6.67. 6. High productivity. This motor has excellent rigid quality in low speed mode; therefore, it is applicable for rigid tapping. Within the rigidity limit of bearing and the hardness limit of cutter, the motor is applicable for low-speed & wide-engagement cutting or high-speed & small-engagement cutting; therefore, the efficiency of cutting hard metals is greatly increased. 7. Strong servo control. The motor has same functions as digital servo spindle when working with special drive. 8. Energy conservation. Given the same power, the energy conservation effect of spindle motor is 20%~50% greater than that of asynchronous motor. It has better energy conservation effect in case of greater power. 9. Wide applications. Depending on the rigid quality in low speed mode, the range of rotational speed of spindle motor is increased and the power ranges from 500W to 150KW.

Goodrive5000 series products are the new generation of high voltage variable frequency speed control systems manufactured by INVT, adopting power unit serial technology, DSP+FPGA+ARM 3-core technology for the control system and the most advanced high performance speed sensorless vector control mode compatible with SVPWM control, in features of high control precision, quick dynamic response, large low-frequency torque and dual-braking, etc. Besides, due to compact structure, the system can be installed against the wall with less maintenance, and its operating interface is more suitable for on-site applications. 1.It's easy switch between high performance open loop vector control and SVPWM(Space Vector Pulse Width Modulation) control by parameters setting; 2.It's easy switch between synchronous motor and asynchronous motor by parameters setting; 3.One drive more(Up to 8 motors for master-slave control; Downsize the equipment with one inverter driving multiple motors); 4.Strong overload capacity(120% of the rated current:120s, 150% of the rated current:5s, 200% of the rated current protect immediately); 5.Wide range of voltage fluctuation tolerance(Run normally when the grid voltage is in the range of -15%～+10%; Derate to run without stop when the voltage is 85%～65% of the rating or 110%～120% in a short time;AVR, automatically adjust output voltage according to bus voltage fluctuation);

IMars BG series single phase grid-tied solar inverter 4-6KW(TR)  is a new generation of PV string inverter, which has been developed by INVT for residential users. It adopts the latest technologies combination of T type three level topology and SVPWM.  IMars BG series single phase grid-tied solar inverter 4-6KW(TR) has the advantages of compact size, light weight, easy installation and maintenance, and most of all, cost-efficient. It also provides flexible system configuration and monitoring solutions for household and commercial  systems. IMars BG Series Three Phase Grid-tied Solar Inverter 4-6KW(TR) r has grat performance at following features: (1)The core technology from Germany. (2)Software optimization for the power grid with much wider adaptability. (3)Global integrated monitoring and management, supporting all kinds of portable mobile devices，HMI is optional. (4)Wide voltage range, low starting voltage , higher conversion efficiency.   (5)Designed with latest thermal simulation technology for longer sevice life.  

IVC1 series PLC features small sizes and high performance in automation control. It has a built-in microprocessor, core computing control system, as well as input points, output points, expansion module buses, etc; this series also includes I/O extension module and special module; the main module has two communication interfaces; the main module I/O also has high-speed counting and high-speed pulse output channel to achieve precision positioning; it has a wealth of built-in programming resources and three standard programming languages, and supports debugging monitoring via Auto Station programming software; it also has an effective user program safety protection system.   1. Compact structure, excellent functions and cost-effective; 2. Applicable to chemical fiber fabric, machine tool, wire cable, foot and beverage, packaging, plastic, and building machinery  

• Max DC Input power (W)1000
• Staring Voltage (V)200