Write a Review
Our Products
Leading Manufacturer, Supplier & Retailer of Refractory Castable and Insulating Castable.
Technical Specifications
| Type | Shilp - Normal | Shilp - Super |
|---|---|---|
| Al2O3 (%) Min. | 50 | 70 |
| Fe2O3 (%) Max. | 4 | 5 |
| Refractoriness oC | 1450 | 1500 |
| Dry Density Kg/m3 | 2100 | 2500 |
| P.L.C. % (+/-) 1400 oC/3Hrs | 1 | 1 |
| Grain Size mm (Max.) | 0 - 5 | 0 - 5 |
| C.C.S. 110 oC Kg/cm2 | 250 | 350 |
| Water Required (%) | 12 To 15 | 12 To 15 |
| Service Temp. oC (Max.) | 1400 | 1450 |
Insulating castable is designed to display low density and low thermal conductivity so as to keep heat energy and to reduce fossil energy consumption.
SHILP LYT- 11
SHILP LYT - HT
| INSULATING CASTABLE SPECIFICATION |
||
|---|---|---|
| BRAND NAME | SHILP LITE - 11 | SHILP LITE - HT |
| NATURE OF BOND | HYDRAULIC | HYDRAULIC |
| PACKING | 25 kg | 25 kg |
| SHELF LIFE | 6 Months | 6 months |
| MAX SERVICE TEMP(°C) | 1300 | 1500 |
| GRAIN SIZE mm (Max.) | 6 | 6 |
| WATER REQUIRED FOR CASTING (%) | 29 - 34 | 25 - 30 |
| CHEMICAL ANALYSIS % | ||
| Al2 O3 | 3.5% max | 1.5% max |
| CaO | - | - |
| Fe2 O3 | - | - |
| PHYSICAL PROPERTIES | ||
| DRY DENSITY Kg/m³ | ||
| after drying at 110 °C / 24 hrs | 1.35 max | 1.65 max |
| CCS, kg/cm2 | ||
| after drying at 110°C / 24 hrs | 35 min | 80 min |
| after heatingat 1100 °C/ 3 hrs | 25 mn | 40 min |
| after heating at 1550 °C / 3 hrs | 40 min | 50 min |
| % Retained on maximum size | 5 | 5 |
| THERMAL PROPERTIES | ||
| Refactoriness, Orton / °C | +14 / 1398 | +23 / 1605 |
| PLC % | ||
| after heatingat 1100 °C/ 3 hrs | ± 0.30 max | ± 0.20 max |
| after heating at 1550 °C / 3 hrs | ± 1.0 max | ± 0.70 max |
| Thermal Condictivity, kcal/m/hr/°C at 500 °C HF |
0.35 max | 045 max |
Jayeshbhai B. Patel (Shilp Ceramics Pvt. Ltd.)
Plot No.G-1317, Road-J, Phase-II, Metoda G.I.D.C., Rajkot, Gujarat - 360021, India
Share us via
