SHIMMER Purified Water Generation system is custom made and designed considering all the parameters in minute details and with the same passion and dedication, whether its capacity is 200 l/h or over 20m3/h. All PW systems meet EP, USP and other regulatory guidelines and ensure the production process, product quality and profitability. The systems are GMP-compliant and conform to FDA and ISPE requirements. All SHIMMER PW systems are pre-tested, validated, compact and ready-to-use. The compact, package unit designed on a stainless-steel skid, are specifically adapted to the high TDS water and offers all purification technologies, such as:

• Sand and Activated carbon filters. 
• Dosing Systems. 
• Softening units with optional hot water sanitization. 
• Demineralization systems. 
• Ultrafiltration units with 6000 Daltons cut-off. 
• Hot water subitizable electro deionisation units. 
• UV Disinfectant (TOC reduction and Germicidal). 
• Single or Two-Pass Reverse Osmosis. 
• ORBITAL welded SS316L tubes. 
• Compliant control panels.

Applications: -

The Purified Water Generation system is used for production of purified water and high purified water from raw water for all applications.

• Purified Water (PW) for pharmaceuticals.
• Water for electronic and Semi-conductor.
• Process Water for manufacturing units
• Bio-technology.
• Food industries
• Beverage industry.
• Cosmetic

Features

• Frequency controlled and sanitary distribution pump
• Optional dual pump station
• High efficiency UV disinfection
• Temperature controllers
• Conductivity meter
• Flow meter
• Ozonation
• Sterile sampling valves.

RANGE OF PRODUCT MODEL AVAILABILITY- The entire Purified Water Generation system is made of SS-316L stainless steel tubes, Pressure Tube, Skid – SS-316, Pre filter – SS-316, Frontal valve & piping wok – SS-316 for easy operation and control. Available from 0.2 m3/hr. to 20 m3/hr.

SHIMMER Two Bed Deionisers consist of FRP/MSRL pressure vessels containing ion exchange resins (commonly referred to as cation and anion exchange resins). The vessels are provided with strainers at the bottom. This not only ensures the exchangers are retained within the vessels but also uniform distribution, flow of water and regenerant takes place in the unit. The unit is fitted with all the necessary piping and individual valve for carrying out the various operations like service, injection and rinse. Regenerant tanks, one each for acid and caustic soda are provided from which measured quantities of regenerant solutions are injected into the unit by means of hydraulic ejectors. A conductivity indicator with cell is provided for continuous measurement of treated water purity.

The two bed deioniser units can be supplied with optional extra equipment such as a degasser to handle certain types of raw water with high amount of alkalinity. The cation exchanger converts alkalinity present in raw water to its equivalent acid, i.e. carbonic acid. The anion exchanger absorbs this along with other acids in cation exchanger treated water. Where water has a high alkalinity the ionic load on the anion can be brought down by using another method to remove carbonic acid. Carbonic acid is unstable and readily breaks down into carbon dioxide and water. The carbon dioxide can be removed mechanically by means of a degasser.

Features

• Easy to install and maintain.
• High Capacity cation exchange resin in sodium form.
• Customised design.
• Less maintenance and operational cost.

Applications: - The Demineralisation Plant is an ideal choice for removal of hardness from raw water for all applications.

• Boiler feed water
• Process water in textile mills
• Beverage manufacture
• Laundry and air conditioning plants
• Cooling tower make-up water
• Jacket cooling
• Hospitals, hotels 
• Jacket cooling

RANGE OF PRODUCT MODEL AVAILABILITY- Demineralisation Plant is comprises of MSRL/FRP Pressure Vessel, Frontal piping wok with manual / Automatic - multi port valve/ CIEL valve / conventional valves for easy operation and control. Available from 1 m3/hr. to 100 m3/hr.

We are a leading Manufacturer of DM Water Plant and Industrial DM Water Plant from Zirakpur, India.