Shiv Shakti Fibre Udyog (Rooffit)

Rohini Sector 11, Delhi

Pre-fabricated Composite Panels or Insulated Panels for Roofing & Cladding are Sandwich Panels manufactured with profiled Color Coated Metal - Zinc Coated / Galvalume Coated Steel Sheets or FRP / GRP Profiled Sheets duly Sandwiched with PUF (Polyurethane Foam) as the insulation material.
The Panels are available in various colors and total thickness of panel range from 30 mm to 100 mm. The PUF Panels are ready-to-install and self supporting with high overall stiffness.

Advantages & Essential Features

• Very high thermal insulation - Superb thermal efficiency & rigidity.
• Ready-to-Install and self supporting.
• Inner and outer skin in Pre-coated GI / Galvalume / FRP Sheets are resistant to extremes of Weather & corrosion.
• Very light weight to high strength ratio.
• Ease of handling & installation.
• For Roofmg & Cladding provision of specially designed overlap system to ensure water leak proof & airtight joints.
• Vertical & horizontal Panels are provided with Tongue & groove joints to ensure air tight assembly.
• Monolithically Constructed Panels, hence saving on support structure, no use of wire mesh or loose insulation / Glass wool to be fixed separately and ease of handling & installation with less of labour.
• Withstand against storm, heavy rainfall, wind.
• Sturdy enough for temperature (-180°C to +140°C).
• Fire retardant and Self extinguishing.
• Low maintenance.

• Applications
• Industrial Building & Sheds - Automobile, chemical, steel, cement, power plants, pharamaceutical, commercial building, godown, etc.
• Telecom Shelters
• Cold Storage & rooms.
• Pre-fabricated Shelters / Defense Shelters.

Range of Insulated Composite Panels

• Insulated Roofing & Cladding Panels for pitched Roofs with minimum slope of 7 - 8%.
• Insulated Roofing & Cladding Accoustic Panels.
• Insulated Wall Panels with Tongue & Groove jointing system for use in Industrial, commercial, refrigerated rooms & Cold Storage.
• Fixing accessories like flashings, corner joints and customized fittings.

Insulated Wall Panels with Tongue & Groove jointing system for use in Industrial, Commercial, Refrigerated Rooms & Cold Storage : Insulated with PUF and are self supporting panels for use in Industrial Building Partition, Telecom. Shelter, Cold Storage, Defense Shelters, Porta Cabins, High Altitude Cabins, ' Commercial Buildings etc.The Panels are provided with tongue and groove systems for jointing Air tight system.

Fixing accessories like flashings, corner joints and customized fittings : All the above panels are available in required thickness as per customers requirements and site conditions. All necessary standard accessories are provided for proper fixing & erection of complete system.

Specification

• Density - 40 ± 2 Kgs m3
• Compressive Strength at 10% deformation - 2.1 Kgs/cm3
• Tensile Strength - 4.0 Kgs/cm2
• Bending Strength - 4.2 Kgs/cm3
• Adhesion Strength (Foam to Steel) - 3.0 Kgs/cm2
• Dimensional Stability (48 hours)  - -25°C 0.1% +38°C & 90% RH 0.1% + 100°C 0.4
• Closed Cell Content - 90-95%
• Temperature Range - -180°C to +140°C
• Temperature Conductivity at 0°C (design value 0.020 k Cal/m-hr/°C or 0.023 w/m - 0.018k Cal/m-hm/°C k)
• Water Absorption - 0.2% volume at 100% RH
• Vapour Permeability (At 90% RH & 38°C) -  0.8/0.12 GMS/HR m2 as per IS 11239
• Fire property extent to burn as per BS 4735 - Max. 100 mm
• Type - Self extinguishing