Our Products
These Male-Female Moulding Inserts are installed during Injection Moulding of PPR-C (Poly Propylene Random Copolymer Pipe And Fitting) like Male Female Coupling, Elbow and Tee, later which helps in fixing other joints of PPR-C Pipes to close or cover that end or to give the extension to PPR-C Pipes. Hence we take utmost care of the Inner Diameter (I/D) and their various threads like 1/2", 3/4" or 1" for the perfect tightening in it.
We manufacture various types of Brass Inserts for PPR-C Fittings like:
The special features of Brass Inserts are:
Packing : Available in 50, 100, 200 nos. or gross or as specified
Size : Shall be manufacture only as per Customer's specified Drawings and Samples.
Threading : Various types and sizes of Threading like B.S.W., B.S.F., B.S.B., B.S.P. & B.S.P.T as per British Standard Whitworth Form and N.C. & U.N.C., N.F. & U.N.F., N.P.T & N.P.S., N.S., N.E.F. etc as per American National Form Threads are available. All threads shall be as per International GO & NO-Go Standards.
Plating/Finish Available : Various types of Plating/Finish like Natural, Nickel, Silver, Tin or as specified are available as per specified layer of microns.
Material : High grade free cutting brass as per IS 319 (Type 1) or BS 249 (Type 1) or any other special Brass material composition as per customer requirement.
Moulding Inserts are installed during Injection Moulding of any Plastic Box/case/Container, later which helps in fixing the various types of Screws to close or cover that plastic Box/Case/Container, in these moulding inserts. Hence we take utmost care of the Inner Diameter (I/D) and their various threads like M2, M3, M4, M5 M6, M8, M10, etc for the perfect tightening of the Screw in it.
We manufacture various types of Brass Moulding Inserts like:
The special features of Brass Moulding Inserts are:
Packing : Available in 50, 100, 200 nos. or gross or as specified
Size : Shall be manufacture only as per Customer's specified Drawings and Samples.
Threading : Various types and sizes of Threading like B.S.W., B.S.F., B.S.B., B.S.P. & B.S.P.T as per British Standard Whitworth Form and N.C. & U.N.C., N.F. & U.N.F., N.P.T & N.P.S., N.S., N.E.F. etc as per American National Form Threads are available. All threads shall be as per International GO & NO-Go Standards.
Plating/Finish Available : Various types of Plating/Finish like Natural, Nickel, Silver, Tin or as specified are available as per specified layer of microns.
Material : High grade free cutting brass as per IS 319 (Type 1) or BS 249 (Type 1) or any other special Brass material composition as per customer requirement.
Threads :
Finish And Coating : Natural, Nickle Plated, Tin Plated or any coating as per customer specification
Any kind of Metric Thread Brass Inserts can be developed and supplied exactly as per Customer Specifications & Requirement.
Press-in expansion inserts for thermosetting plastics
Materials : Brass to BS EN 12164 CW 614N, RoHS compliant
Internal thread sizes (ISO Metric) |
Length | Length* | Head thickness | Head dia. | External dia. | Rec. hole size -0.00 +0.10 | Min. wall thickness |
mm | mm | mm | mm | mm | mm | mm | |
M3 | 4.7 | 3.5 | 0.51 | 5.5 | 4.2 | 4 | 3.2 |
M4 | 7.9 | 5 | 0.82 | 7.1 | 5.9 | 5.6 | 4 |
M5 | 9.4 | 6 | 0.99 | 7.9 | 6.6 | 6.4 | 4.8 |
M6 | 12.6 | 9.5 | 1.25 | 9.5 | 8.3 | 8 | 6 |
M8 | 12.6 | 9.5 | 1.25 | 11.1 | 9.9 | 9.6 | 7 |
Heat or push-in inserts for thermoplastics
Materials
Internal thread sizes (ISO Metric) |
Length | Head thickness | Head dia. | Hole dia. | Wall thickness | Boss dia. | Hole depth |
M3 | 5.2 | 0.75 | 5.5 | 4 | 1.7 | 7.4 | 5.3 |
M3 | 5.2 | 0.75 | 7.1 | 4 | 1.7 | 7.4 | 5.3 |
M4 | 8.5 | 0.75 | 7.1 | 5.9 | 2.5 | 10.8 | 8.6 |
M4 | 8.5 | 0.75 | 8.7 | 5.9 | 2.5 | 10.8 | 8.6 |
M5 | 10.1 | 1 | 7.9 | 6.5 | 2.9 | 12.2 | 10.2 |
M5 | 10.1 | 0.9 | 11.1 | 6.5 | 2.9 | 12.2 | 10.2 |
M6 | 12.3 | 1.3 | 9.5 | 8.2 | 3.2 | 14.6 | 12.5 |
M6 | 12.3 | 1 | 12.7 | 8.2 | 3.2 | 14.6 | 12.5 |
M8 | 13.8 | 1.25 | 14.3 | 10.6 | 4.1 | 18.7 | 14 |
Length / Size : Begins from M2 or equivalent threads and upto any size as per custom design or requirement
Finish And Coating :Natural, Nickle Plated, Tin Plated or any coating as per customer specification.
Any kind of Brass Press In Inserts can be developed and supplied exactly as per Customer Specifications & Requirement.
We shall be pleased to develop All types of Brass Fasteners & Inserts as per specific requirements.
Size : M2 , M3 , M3.5 , M4 , M5 , M6 , M8 , M10 , M12 , M16 , M20 , 1/8" , 5/32", 3/16", 1/4", 5/16" , 3/8" , 1/2" , 3/4" , 1" in Metric BSW , BSF , BSP , R , G , UNC , UNF , NPT , NPSM, NPTF , FPT Threads.
Features : Tappex Type Inserts Brass Molding Inserts Brass Inserts Plastic Molding inserts are used with plastics and soft woods. They are available with serrated grooves and are push fit type.
Any kind of Tappex Type Brass Inserts can be developed and supplied exactly as per Customer Specifications & Requirement.
Length / Size :Begins from M2 or equivalent threads and up to any size as per custom design or requirement
Finish And Coating :Natural, Nickle Plated, Tin Plated or any coating as per customer specification.
Any kind of Brass Hexagonal Inserts can be developed and supplied exactly as per Customer Specifications & Requirement.
We shall be pleased to develop All types of Brass Fasteners & Inserts as per specific requirements.
Size : M2 , M3 , M3.5 , M4 , M5 , M6 , M8 , M10 , M12 , M16 , M20 , 1/8" , 5/32", 3/16", 1/4", 5/16" , 3/8" , 1/2" , 3/4" , 1" in Metric BSW , BSF , BSP , R , G , UNC , UNF , NPT , NPSM, NPTF , FPT Threads.
Features : Brass Straight Knurled Brass Inserts Brass Molding Inserts One piece through-hole insert. it can be molded / plotted-in. A straight Knurl provides torque out capabilities.
Any kind of Brass Straight Knurled Inserts can be developed and supplied exactly as per Customer Specifications & Requirement.
Size : M2 , M3 , M3.5 , M4 , M5 , M6 , M8 , M10 , M12 , M16 , M20 , 1/8" , 5/32", 3/16", 1/4", 5/16" , 3/8" , 1/2" , 3/4" , 1" in Metric BSW , BSF , BSP , R , G , UNC , UNF , NPT , NPSM, NPTF , FPT Threads.
Features : Brass Self Tapping Inserts are suitable for installation with wide range of Thermoplastics, used where high pull out resistance is required
Available : Brass / Nickle & Chrome Finish
Sizes :1/2", 3/4" 1", 1.1/4" 1.1/2", 2"
Threads : BSP & BSPT (Parallel & Taper Threads)
Designed & developed as per customer's requirement.
Any kind of Male Female Inserts for PPR Fittings can be developed and supplied exactly as per Customer Specifications & Requirement.
Size : M2 , M3 , M3.5 , M4 , M5 , M6 , M8 , M10 , M12 , M16 , M20 , 1/8" , 5/32", 3/16", 1/4", 5/16" , 3/8" , 1/2" , 3/4" , 1" in Metric BSW , BSF , BSP , R , G , UNC , UNF , NPT , NPSM, NPTF , FPT Threads.
Features : Cross Knurled Inserts are suitable for installation with wide range of Thermoplastics, used where high pull out resistance is required
Special Features : These Brass inserts are push fit type and are used with Wood and plastic molding.
Length / Size : from 1/4"mm -3/4" mm
Finish And Coating : Natural, Nickle Plated, Tin Plated or any coating as per customer specification
Typical Application : Instrumentation , Telecommunications, and other Plastic Cases Assembly.
Threads :
Length / Size : Begins from M2 or equivalent threads and upto any size as per custom design or requirement
Finish And Coating : Natural, Nickle Plated, Tin Plated or any coating as per customer specification.
Any kind of Brass Square Inserts can be developed and supplied exactly as per Customer Specifications & Requirement.
Size : M2 , M3 , M3.5 , M4 , M5 , M6 , M8 , M10 , M12 , M16 , M20 , 1/8" , 5/32", 3/16", 1/4", 5/16" , 3/8" , 1/2" , 3/4" , 1" in Metric BSW , BSF , BSP , R , G , UNC , UNF , NPT , NPSM, NPTF , FPT Threads.
Features : It is press-in expansion type Brass Inserts Press Lock Type Brass Inserts insert designed for use in Thermoplastic molding.it requires vary low screws installation torque and has self-locking action Brass Inserts Press Lock Type Brass Inserts Tappex Emhart type Injection Moulding Inserts injection Molding inserts Insert Molding insert Moulding.
Any kind of Brass Press Lock Type Inserts can be developed and supplied exactly as per Customer Specifications & Requirement.
Begins from M2 or equivalent threads and upto any size as per custom design or requirement
Finish And Coating : Natural, Nickle Plated, Tin Plated or any coating as per customer specification.
Any kind of Ultrasonic Brass Inserts can be developed and supplied exactly as per Customer Specifications & Requirement.
Material :
Threads :
Types of Inserts :
Finish And Coating : Natural, Nickle Plated or any coating as per customer specification.
Any kind of Brass Inserts, Brass Rotational Moulding Inserts can be developed and supplied exactly as per Customer Specifications & Requirement.
Material :
Threads :
Wood Fit Inserts Range of inserts are specifically for the rotational moulding industry and are available in three different type, each providing a large surface area for the plastic to adhere to resulting in high torque and pull-out performance.
Any kind of Wood Fit Brass Inserts can be developed and supplied exactly as per Customer Specifications & Requirement
Material :
Finish And Coating : Natural, Nickle Plated or any coating as per customer specification.
Any kind of Brass Inserts For Soft Tubing can be developed and supplied exactly as per Customer Specifications & Requirement.