Our Products
We are listed at the apex in the list of the eminent Moulded Friction Sheets Exporters from India. The Industrial Friction Sheets, offered by us, are sourced from Supremo Polymer Industries like Dupont, Hoechst, ICI, Diakin, HFL etc. The unmatched quality and high precision has made the Asbestos Friction Sheets ideal for various industrial applications.
Salient Features :Technical Data
Friction | |
---|---|
u for design purpose | 0.35 (dry) |
Physical Properties | |
Data based on standard test methods | |
Specific gravity | 2.00 |
Rockwell hardness | L65 |
Ultimate compressive strength | 850 kg/cm2 |
Ultimate shear strength | 115 kg/cm2 |
Ultimate tensile strength | 135 kg/cm2 |
Thermal conductivity | 0.97 W/m oC |
Recommended Operating Range | |
Maximum temperature | 350oC |
Maximum continuous temperature | 150oC |
Unit Pressure | 70-600 KN/m2 |
Maximum rubbing speed | 18m/sec. |
Size range | |
Thickness | 3mm to 25mm |
Length | 304mm (12") |
Width | 304mm (12") |
We are renowned as one of the forefront PTFE Plastic Products Exporters from India. The Ptfe Products are dark grey in color and have short filaments of steel and non - metallic substances in a random dispersion. The Polytetrafluoroethylene Products are ideal for applications under dry or oil immersed operating conditions. Moreover, the unmatched quality, high performance and precision have made the PTFE Products ideal solution for various different industrial applications.
| |
We are looked upon as one of the outstanding Roll Brake Lining Exporters and Suppliers in India. The Industrial Roll Lining, offered by us, is manufactured using hi-grade friction materials i.e. yarn, spun around brass wire etc. The Industrial Roll Linings have resistance up to 100oC (212oF) temperature and are ideal for applications under dry conditions. Moreover, high durability and tensile strength has also made the Asbestos Roll Lining ideal for certain heavy road transport vehicles and tractors.
Note :The continuous temperature quoted is for constant slip conditions. For intermittent applications, bulk temperature of 160oC are acceptable for long periods. Recommended mating surface :Good quality fine grained pearlitic cast iron. Cast steel is not suitable mating surface but forged or cold rolled steel with a brine ll hardness of 200 or more may be used. Design value : The co-efficient of friction design should be based upon the graph, the seventy of application and maximum anticipated operating temperature being taken into account. Normal engineering practice should be followed in applying an appropriate safety factor to torque requirement of brake / clutch unties. Machining :High speed steel tools are recommended for use with this material. Size Range (Nominal):Supplied in rolls of approximately 15 meters (50 ft) and thickness from 4.8mm (3/16") to 19mm 13/4") and width from 25.4mm.
Technical Specifications:
Friction | |
---|---|
Mu for design purposes | - 0.35 |
Physical Properties | |
Data based on standard test methods | |
Specific gravity | 1.6 kgs / cm2 |
Ult. tensile strength | 246 kgs / cm2 |
Ult. compressive strength | 630 kgs / cm2 |
Rivel holding capacity | 900 kgs / cm2 |
Recommended operating range | |
Maximum temperature | 260oC |
Maximum continuous temperature | 125oC |