Mumbai, Maharashtra, India
GST : 27AWXPJ2287R1ZA
Verified
Add Review
Our Products
We have a wide range of Stainless Steel Angle products in both Metric and Imperial, Equal and Unequal, as well as different.
A fastener or fastening is a hardware device that mechanically joins or affixes two or more objects together. In general, fasteners are used to create non-permanent joints; that is, joints that can be removed or dismantled without damaging the joining components. Welding is an example of creating permanent joints
anchor bolt
batten
bolt (fastener)
Screw
brass fastener
buckle
nail
dowel
linchpin
R-clip
split pin
spring pin
tapered pin
retaining rings
circlip
e-ring
rivet
rock bolt
rubber band (or bands of other materials)
screw anchor
threaded fastener
captive threaded fasteners
nut
screw
washers
threaded rod
We specialize in the manufacturing and Exporting of a wide Range Of Perforated Sheets, which is manufactured under the strict supervision of our team of experts. Known for their resistance to wear and tear, fine finish, and durability, these are widely demanded in the domestic market & International Markets.
We Shree Rajsuri Impex (India) are one of the leading Manufacturers, Suppliers & Exporters of Round Bar in different shapes and sizes and with different specifications as per the customers’ requirement. These Round Bar are characterized by high durability, resistance to corrosion, flawless finish and complete reliability in service. Our complete range is stringently tested by our well equipped testing unit, to ensure their compliance with international quality norms. These are used in various industries like Oil & gas, Petrochemical, Pharmaceutical, Fertilizers, Construction, Food, Power and Instrumentation.
There are three types of coupling available
The cap covers the end of a pipe. Pipe caps are used at the dead end of the piping system. It is also used in piping headers for future connections.
SHREE RAJSURI IMPEX is condensate pot exporter and manufacturer supplying to various countries globally. The condensate pots are made from superior quality materials and sold at competitive rates.
The prime purpose of a condensate or seal pot is to hold foreign material and any liquid resulting from vapour (condensate). This avoids the metering system from being damaged. Condensate pot has a pipe with a 4 inch diameter which is fixed horizontally between the flow meter and gauge. It is employed as a blockade between the chief line and the secondary mechanism to measure steam or any other vapours which may turn into liquid state in order to ensure compatibility with the secondary apparatus.
Being one of the leading seal pot manufacturers, we produce condensate pots in numerous materials like stainless steel, alloy steel, Monel, Hastelloy and carbon steel. Seal pots are widely employed in processing industries in addition to power plants, steel, refineries and petrochemical business.
Details
| Material | Shell | Cap | Pipe Schedule | Test Pressure |
|---|---|---|---|---|
| Carbon Steel | A-106 | A-105 | Sch.40 | 80 Kg / Cm2 |
| Sch.80 | 125 Kg / Cm2 | |||
| Sch.160 | 125 Kg / Cm2 | |||
| Stainless Steel | SS304 | SS304 | Sch.40 | 90 Kg / Cm2 |
| Sch.80 | 150 Kg / Cm2 | |||
| Sch.160 | NA | |||
| Stainless Steel | SS316 | SS316 | Sch.40 | 90 Kg / Cm2 |
| Sch.80 | 150 Kg / Cm2 | |||
| Sch.160 | NA | |||
| Alloy Steel | A-335 | A-182 | Sch.40 | NA |
| A-12 | F-12 | Sch.80 | 125 Kg / Cm2 | |
| Sch.160 | 210 Kg / Cm2 | |||
| Alloy Steel | A-335 | A-182 | Sch.40 | NA |
| A-12 | A-12 | Sch.80 | 125 Kg / Cm2 | |
| Sch.160 | 210 Kg / Cm2 | |||
| Special Monel & Hastelloy | Specify | Specify | - | - |
| - | - | - | - |
A pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members.
In common usage the words pipe and tube are usually interchangeable, but in industry and engineering, the terms are uniquely defined. Depending on the applicable standard to which it is manufactured, pipe is generally specified by a nominal diameter with a constant outside diameter (OD) and a schedule that defines the thickness. Tube is most often specified by the OD and wall thickness, but may be specified by any two of OD, inside diameter (ID), and wall thickness.
The recent years have seen a very steady rise in the growth of copper tube consumption in the air-conditioning and refrigeration systems due to the inherent properties of copper and its abilities to meet the needs of the ACR Industry.
The Pancake Copper Coils enable easy & economical packaging and transportation of the copper tubes. The atmospheric controlled environment furnace is also specially designed and equipped to maintain the Pancake Copper Coils’ shape as it is annealed, reducing any coil distortion.
We manufacture, supply and export Female Branch Tee Fittings which are very useful in various types of connecting functions in the big industries. Our Female Branch Tee fittings are of four types to be used in many different works in the varied industries.
Our in-house production of Female Branch Tee is manufactured with excellent quality of raw materials to suit the fixing work mainly in electrical industries, air conditioning industries. These products of ours have been well demanded and extensively used by the clients of diverse category in different size. These Female Branch Tee have part numbers of numerous kinds to select from
Swage nipples is a type of pipe fitting is defined as a part used in a piping system, Welding a fitting to the pipe means it is permanently leakproof.
Thermowells are utilized when pressure, high velocity and corrosive process media exist. This serves to isolate and protect the sensing instrument, and permits removal of a sensing instrument without shutting down the process. A perfect solution for protecting the process and extending product service life.
Key Features:
Straight, Stepped or Tapered designs
One piece bar stock
Wide selection of sizes, material and dimensions
Stamped with date code, material and heat numbers
We offer a wide range of Union 3000 fittings in ferrous and non-ferrous metals & alloys, that are used for varied engineering, mechanical, chemicals & construction applications. The union pipe fittings and and steel cap fittings offered are from different types, to suit diverse applications.
These products contain lead and are not allowed by Federal Law to be installed for potable water use in India. and its territories.
WE SHREE RAJSURI IMPEX(INDIA) are leading Manufacturer, Exporter and Supplier of circles.
Inconel is a family of austenitic nickel-chromium-based superalloys.
Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat.
Inconel alloys are typically used in high temperature applications. Common trade names for Inconel Alloy 625 include: Inconel 625, Chronin 625, Altemp 625, Haynes 625, Nickelvac 625 and Nicrofer 6020.[4] Inconel Alloy 600 include: NA14, N06600, BS3076, 2.4816, NCr15Fe (FR), NiCr15Fe (EU) and NiCr15Fe8 (DE). Inconel 718 include: Nicrofer 5219, Superimphy 718, Haynes 718, Pyromet 718, Supermet 718, and Udimet 718.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 1 WEEK
Pipe tee is used for distributing or collecting the fluid from the run pipe. It is a short piece of pipe with a 90-degree branch at center. There are two types of Tee used in piping, Equal / Straight Tee and Reducing / Unequal Tee.
Straight Tee
In straight tee, the diameter of the branch is same as the diameter of the Run (Header) Pipe.
Reducing Tee
In reducing tee, diameter of the branch size is smaller than the diameter of the Run (Header) Pipe
Barred Tee
A barred tee which is also known as a scrapper tee is used in pipelines that are pigged. The branch of the tee has a restriction bar welded internally to prevent the pig or scrapper to enter the branch. The bars are welded in the branch in a way that it will allow restriction free passage of the pig from the run pipe.
Wye Tee / Lateral
It is a type of Tee which has the branch at a 45° angle, or an angle other than 90°. Wye tee allows one pipe to be joined to another at a 45° angle. This type of tee reduces friction and turbulence that could hamper the flow. Wye tee is also known as a lateral.
A pipe reducer changes the size of the pipe. There are two types of reducer used in piping Concentric & Eccentric.
Concentric Pipe Reducer or Conical Reducer
In Concentric reducer which is also known as a conical reducer, the center of both the ends is on the same axis. It maintains the centerline elevation of the pipeline. When the center lines of the larger pipe and smaller pipe are to be maintained same, then concentric reducers are used.
Eccentric Reducer
In Eccentric reducer, the center of both the ends is on different axis as shown in the image. It maintains BOP (bottom of pipe) elevation of the pipeline. When one of the outside surfaces of the pipeline is to be maintained same, eccentric reducers are required.
Plates and sheets are available in stainless steel, nickel alloy, carbon steel, alloy steel and duplex steel. We stock sheets and plates of standard quality, high strength, corrosion resistance and finished product of no defect. Plates and sheets are highly customized and available in different range as per the requirement stated by our clients. Plates and sheets offered by us are of superior quality, high durability and ductility. Plates and sheets are extensively used in industrial sector for manufacturing machines and so on.
We specialize in the manufacturing and Exporting of a wide Range Of wire mesh, which is manufactured under the strict supervision of our team of experts. Known for their resistance to wear and tear, fine finish, and durability, these are widely demanded in the domestic market & International Markets.
We manufacturer tube clamps as per DIN 3015 standard hold expertise in offering the superlative quality Tube Clamps which eliminates vibrations due to its unique construction, these tube clamps are designed as per customer’s need & quality standards. We examine the whole range of tube clamps in terms of quality so as to dispatch a flawless range. Our tube clamps are well known in the industry for its robust design.
Material
Clamp Halves (bodies)
PP (polypropylene – H110ma Grade) – Dark Green Colour
PA (polyamide – Pa-6 Grade) Black Colou
Aluminium (lm-6 Grade)
Top Bottom Plates
Steel (ST 37.5, IS 2062, IS 1018) With Trivalent Zinc Coated/phosphatised Finish.
Stainless Steel ( SS 304, SS 316) With Natural Finish
Bolts – Steel ( 4.6, 8.8, 10.9 Grade), Stainless Steel (SS 304, SS 316 Grade)
Size – 6 Mm To 219mm ¼” To 8”
Series - Standard Series Heavy Series
Drop Forging is a processing method by use of forging press put pressure on metal blanks, making it produce plastic deformation in order to obtain certain mechanical properties, a certain shape and sizes. Forging can eliminate the as-cast loose defect produced during metal smelting process, and optimize the microstructure. Meanwhile because of the intact metal flow, the mechanical properties of forging will be better than that of castings in same material.
Air headers have the ability to replace numerous unit valve fabrications that generally operate from one source. They can be aptly used with a range of outlet take off valves. In this arrangement, the connection of the inlet can be screwable or flange. It is also possible to create a drain valve at the air distribution manifold outlet. For wall mounting use, ‘U’ shaped clamp will be supplied.
Durable structure, sharp design and ease of installation are some features of air headers supplied by Mcneil Instruments. They are constructed from stainless steel or carbon steel. We ensure that each valve is thoroughly checked before shipment.
The compact design is the most valuable benefit of the stainless steel air header made by our organization. We have a prestigious clientele on a national and global level.
A syphon can be defined as a simple tool which aids to protect the pressure gauge from hot temperature agents such as steam. In addition, it is effective in decreasing possibly destructing effects of speedy changes in pressure. Offered at economical prices, syphons enable builders of systems to employ a pressure sensor having a low temperature scale in high temperature functions. At the time of first installation, it is important to keep in mind that the syphon must be filled with water or any other appropriate separating channel.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : Wooden box
Delivery Time : Ready
We manufacture, supply and export Bulkhead Union Fittings which are very useful in various types of connecting functions in the big industries. Our Reducing Union fittings are of four types to be used in many different works in the varied industries.
Our in-house production of Bulkhead Union is manufactured with excellent quality of raw materials to suit the fixing work mainly in electrical industries, air conditioning industries. These products of ours have been well demanded and extensively used by the clients of diverse category in different size. These Cross have part numbers of numerous kinds to select from.
We use latest technology and comprehensive quality control systems in designing and manufacturing wide range of Quick Release Coupling. Designed for reliable performance, our entire range is fabricated from qualitative raw material for ultimate durability and strength. These corrosion resistant coupling come with single & double shut off valves for avoiding leakage.
QRC type coupling work on Push and Pull principle. When the Adaptor is pushed to the coupler, its is accurately held by the self locking arrangement resulting in a positive & leak proof connection. This action simultaneously opens the valve & fluid flow starts. To disconnect, pull back the sleeve of the coupler, the Adaptor ejects out and the valves shut off automatically. Valves are provided in type one way sealing & two way sealing.
Features :
Quick connect / Release Couplings eliminate valves and screw on fittings in many pneumatic, hydraulic and chemical systems.
Permits easy, safe, quick & reliable connections between delivery lines, pressure hoses etc.
Connection disconnection of fluid systems is as easy as plugging in an electric gadget.
Stub ends are used with lap joint flange. In this type of flange, the stub is butt welded to the pipe, whereas flange is freely moved over the stub end. It is basically flange part but covered under ASME B16.9 that is why it is considered as pipe fittings.
Long radius pipeline bends are used in fluid transportation line which required pigging. Due to their long radius and smooth change of direction, pipe bend has very less pressure drop, and smooth flow of fluid & pig is possible. 3D and 5D Pipe bends are commonly available. Here, D is the pipe size.
Monel is a group of nickel alloys, primarily composed of nickel (from 52 to 67%) and copper, with small amounts of iron, manganese, carbon, and silicon. (Alloys with copper contents 60% or more are called cupronickel.)
Stronger than pure nickel, Monel alloys are resistant to corrosion by many agents, including rapidly flowing seawater. They can be fabricated readily by hot- and cold-working, machining, and welding.[2]
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 1 WEEK
Brass is an alloy of copper and zinc, in proportions which can be varied to achieve varying mechanical and electrical properties. It is a substitutional alloy: atoms of the two constituents may replace each other within the same crystal structure.
Bolted double pin high pressure tri clamps are a significant upgrade from the standard wing-nut clamp, with the ability to withstand twice the pressure of comparable sized single or double hinged clamps. High pressure bolted tri clamps are available in stainless steel SS304, with sizes ranging from 3/4 inch up to 12 inches. Larger sizes are available by special order. Intended for Tri Clamp fitting connection, high pressure clamps are commonly used in situations where temperatures fluctuate and PTFE gaskets are installed.
Nipple is a short stub of pipe which has a male pipe thread at each end or at one end. It used for connecting two other fittings. Nipples are used for connecting pipe, hoses, and valves. Pipe nipples are used in low-pressure piping.
We bring forth for our patrons a wide assortment of Forged Pipe Fitting Coupling that is manufactured using optimum grade raw material, which is sourced from the most certified vendors of the industry. In addition to this, our team of experienced members use latest technology and machinery for fabrication of these products as per the detailed specifications of the clients. Offered range can thus, be availed in various sizes, grades and other dimensions.
Features :
Durable
High tensile strength
Longer service life
Minimal maintenance
Inconel is a family of austenitic nickel-chromium-based superalloys.
Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel's high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 1 WEEK
We shree rajsuri impex (india) leveraging on well-equipped infrastructure facilities and experienced professionals, we are engaged in manufacturing a wide range of forged rings. these rings are manufactured using quality tested materials that are sourced from genuine and reliable vendors of the industry. owing to their unmatched quality and outstanding attributes, these are rings are used in various industrial applications.
JIC fittings (aka SAE 37° tube fittings, flared fittings, or SAE J514 fittings ) are the most popular hydraulic fluid connector in North America. While JIC fittings are often used for joining tubing in a hydraulic system, they are frequently used on hose as an end adapter for female JIC swivel fittings, which are the most common end connection for hydraulic hose assemblies.
Temperature Rating :
Stainless: -425 to 1200°F (-253 to 648° C)
Brass: -40 to 400°F (-40 to 204° C)
Alloy 400 : -65 to 800°F (-53 to 426° C)
The adjustable pressure gauge snubber drawa unique taper. pin / Orifice design for high range of damaging. The damping can be adjusted the fluid and the pulsation.
We manufacture, supply and export Female Run Tee Fittings which are very useful in various types of connecting functions in the big industries. Our Female Run Tee fittings are of four types to be used in many different works in the varied industries.
Our in-house production of Female Run Tee is manufactured with excellent quality of raw materials to suit the fixing work mainly in electrical industries, air conditioning industries. These products of ours have been well demanded and extensively used by the clients of diverse category in different size. These Male Run Tee have part numbers of numerous kinds to select from.
