Air Conditioning Copper Tubes, provided by us, is as per ASTM B-68/80 and 280/80 (BS C 106) standards. Air Conditioning Copper Tubes that we offer are used for refrigeration and air conditioning purposes. We provide flattening, double over test, pneumatics, hydrogen embrittlement, cleanliness and micro structure test for Air Conditioning Copper Tubes as per specifications mentioned by the clients. Available Manufacturing Range :

• 10 meters
• 15metrs
• 25 meters
• 30 meters

Copper Capillary Tubes that we provide are made in accordance with ASTM B 360 standards. Our Copper Capillary Tubes are hard and annealed. Commercially, pure copper of our Copper Capillary Tubes is deoxidized with phosphorous in order to leave phosphorous content (high residual) that is not readily prone to environmental changes, etc. Copper Capillary Tubes, provided by us, has good thermal conductivity. Copper Capillary Tubes that we offer can also be provided as per requirements of the customers. Application Areas Of Our Copper Capillary Tubes :

• Refrigeration
• Air Conditioning
• Thermostat
• Relay

Packaging Types :Standard Packing

• Mini Coil 25 ft. long
• Medium Coil 50 ft. long
• Large Coil 100 ft. long

Specifications

Size in inches ID	O.D IN M.M	I.D IN M.M	GMS/FT. Approx
0.015	1.38	0.38	3.77
0.020	1.51	0.51	4.33
0.026	1.66	0.66	4.97
0.031	1.79	0.79	5.52
0.036	1.91	0.91	6.04
0.044	2.12	1.12	6.94
0.050	2.27	1.27	7.58
0.055	2.40	1.40	8.14
0.060	2.52	1.52	8.65
0.064	2.63	1.63	9.12
0.070	2.78	1.78	9.76
0.075	2.19	1.91	10.32
0.080	3.03	2.03	10.83
0.090	3.29	2.29	11.9

Copper Finned Tubes, offered by us, is tied with sheet or wire and is root soldered. Copper Finned Tubes has an extended surface area when compared with plain tubes that increases heat exchange capacity of the tubes. Hence, our Copper Finned Tubes are used for many industrial applications. Copper Finned Tubes that we provide is manufactured with different diameter and length. We manufacture Copper Finned Tubes of bare tubes made of cupro nickel, copper and admiralty brass material. Moreover, fin material of our Copper Finned Tubes is made of aluminum and copper wounded around it. Our Copper Finned Tubes has large surface area. Corrugated Tubes :

• Generates high turbulence in Media
• Vastly enhance Heat Transfer co-efficient for a given Reynolds number

Unique Feature :

• High response to cleaning-in-place
• Virtually maintenance-free
• Uniform temperature distribution even for highly viscous fluids
• Shorter residence time, low product hold-up
• Can handle liquids with high viscosity, suspended fibers and large particulates even up to 50 mm
• Compact size
• Saves space
• High efficiency
• Corrosion-resistant
• Substantially reduced fouling

Types Of Copper Finned Tubes :

• Sheet Wound Fin Tube (Root Soldered)
• Wire Wound Fin Tube (Root Soldered)

Changeable Type Fin Tube :Our Copper Finned Tubes are considered the best for air surface coolers. Copper Finned Tubes cone is an individual tube and seamless in nature. Copper Finned Tubes can be easily replaced if fails to work without any blockage to other air cooler tubes.

Specifications

Svmc Finned Tube					SVMC Outer Grooved Tube
Fins/Inch	Nominal Dimension		Plain &Section Dimension		Finned	Section Dimension	Wall	Out Surface	Out/In Surface	Cross Sectional
	Out Dia	Wall Thk	Out Dia	Wall Thk.	Out Dia	Root Dia.	Thk.	Area	Radio	Area
19	15.88	0.71		1.07			0.64	12.34	3.48	1.00
19	15.88	0.89		1.32			0.79	12.34	3.60	0.94
19	15.88	1.07	15.88	1.47	15.88+0, V0.4	12.7	0.94	12.34	3.72	0.88
19	15.88	1.24		1.65			1.12	12.34	3.85	0.82
19	15.88	1.65		2.11			1.47	12.34	4.18	0.70
19	19.05	0.71		1.24			0.64	15.12	3.33	1.64
19	19.05	0.89		1.32			0.79	15.12	3.41	1.56
19	19.05	1.07	19.05	1.47	19.05+0, -0.4	15.88	0.94	15.12	3.50	1.48
19	19.05	1.24		1.65			1.12	15.12	3.60	1.41
19	19.05	1.65		2.11			1.47	15.12	3.84	1.24
19	19.05	2.11		2.41			1.88	15.12	4.13	1.07
26	15.88	0.71		1.25		0.60	0.60	15.34	4.30	0.97
26	15.88	0.89	15.88	1.42	15.88+0, -0.4	12.70	0.79	15.34	4.47	0.94
26	15.88	1.07		1.68			0.94	15.34	4.63	0.89
26	15.88	1.24		1.88			1.12	15.34	4.78	0.82
26	19.05	0.81		1.42			0.70	18.79	4.37	1.65
26	19.05	0.89		1.5			0.79	18.79	4.24	1.56
26	19.05	1.07		1.68			0.94	18.79	4.36	1.48
26	19.05	1.24	19.05	1.88	19.05+0, -0.4	15.88	1.10	18.79	4.47	1.41
26	19.05	1.47		2.11			1.25	18.79	4.37	1.35
26	19.05	1.65		2.28			1.47	18.79	4.28	1.30
26	19.05	1.83		2.44			1.65	18.79	4.20	1.26

Made as per BS EN 1057-R220 (Previous Designation BS 2871; Part 1: Table Y) standards, our Copper Plumbing Tubes has wall with extra thickness, and hence it can be used for pressurized stem installations for working temperature of 205C (maximum). Our Copper Plumbing Tubes comes in 3-6 meter straight length. It is mainly in the half hard condition. Copper Plumbing Tubes that we offer is perfect for tolerating cold bending temper. Forming maximum can be easily bent on bending machine for 6 to 22 mm o.d. sizes. With a bending spring, it can be easily manipulated. Copper Plumbing Tubes that we provide is light in weight with a combined ability to withstand high internal pressure. Features :

• Ideal product for Hot and Cold water
• Central heating
• Gas services
• For hot and installation

Specifications :

• Wall thickness : 1.5 times thicker than maximum
• Supplied as either 6m long half
• Annealed 25M or 23m long coils

Suitable For :

• Underground services
• Drinking water
• Central Heating
• Sanitation Gas
• Various engineering applications

Straight Copper Tubes, provided by us, is made in compliance with high-quality standards of the industry. We have experts at the unit who have years of experience and are proficient in designing Straight Copper Tubes as per the specifications of the customers. Straight Copper Tubes that we offer is required in several industrial units. Clients can get Straight Copper Tubes at market leading rates. Available In Manufacturing Range :

• Outer Diameter : 6mm to 250mm
• Wall thickness : 0.5mm to any thickness

Technical Specifications