Based in Haryana, we have built a wealth of reputation for manufacturing and supplying the Double Stage Air Compressor Test Rig of superlative quality. Our deft team aligns these Double Stage Air Compressor Test Rigs with the prevailing industry standards to guarantee fail-safe functionality to the buyers. Plus, the prices quoted by us are insignificant in comparison to the quality!

Scope of Experimentations :-

• To calculate the volumetric efficiency.
• To calculate isothermal HP.
• To calculate compression ratio.

 
Utilities Required :-

•  Electricity 2 kW. 220V AC, Single Phase.
•  Floor Area 1.5 x 0.75 m.

 
 Technical Details :-

• Compressor : Double Stage, Double Cylinder. Capacity 6.9 CFM max.
• Drive : 2HP/2 phase 5 HP.
• Spring Balance : Dial type.
• Manifold Tank : Suitable Capacity.
• Flow Measurement : Orifice meter with Manometer.
• Temp. Measurement : Thermometer 2 Nos.
• Air Tank : Capacity 100 Ltrs. with safety valve shut off valve. Bourdon Type.
• Pressure Gauge : Bourdon type.
• Control Panel Comprises of : RPM measurement : RPM Indicator with Proximity sensor.
• Energy measurement : Electronic Energy meter, L&T make.
• MCB : For overload protection.
• Standard make On/Off Switch, Mains Indicator, etc.

 The whole set-up is well designed and arranged in a good quality painted structure.

We bring forth a qualitative range of ICE Plant Tutor Test Rig for our esteemed customers. Our test rig is preferred by professionals for its compact design, smooth operation and dependable result. Our company is a renowned Manufacturer and Supplier of ICE Plant Tutor Test Rig from Ambala, Haryana and known for our fair pricing policy.

Used for :

• To study vapour compression Refrigeration cycle.
• To find the C.O.P. of the unit.
• To determine the ICE formatting capacity of the unit.
• To study the effect of Agitator motor in the unit.
• To study pump down the gas.

Details :

• Technical Specifications of the Equipment :- The Ice plant is consisting with following controls and components.
• Compressor :-  ISI Hermetically sealed kirloskar compressor.
• Condenser :- Fins and copper tube type air cooled condenser of capacity 1 H.P. size 14” x 14” x 4 row deep has been provided in the unit.
• Condenser Fan Motor :- One no. forced draft fan motor of capacity 1/10 FHP along with suitable capacity of fan blade has been provided to draft the air on the condenser.
• Receiver :- One no. heavy duty sheet type receiver along with valve fittings has been provided to store the liquid refrigerant to R-12 gas.
• Rotameter :- To measure the flow rate of R-12 in unit.
• Brine Tank :- The inner brine tank has been fabricated out of 22 SWG stainless steel. The outer tank is also made by the same sheet. There has been provided with 4” thick high density thermocoal insulation has provided between inner and outer tanks.
• Cooling Coil :- Copper tube type cooling coil of size ¾” O/D has been fixed inside the inner S.S. tank.
• Control panel Board :- The following controls have been provided on 3/4“ thick dull sunmica.
• Main Switch, Voltmeter, Amp. Meter, Energy meter, Indication lights, Digital Temp Indicator, Suction gauge, Discharge gauge, LP/HP cut out, Expansion valve, capillary tube, Solenoid value, Filter dryer, Thermostat, Liquid line indicator.
• Agitator with Elect. Motor :- One no. suitable capacity of agitator along with agitator motor has been fitted in the unit.
• Ice Cans :- 2 lot on Ice cans has been provided in unit.
• Base :- Heavy duty angle iron base has been provided in the unit to accommodate the condensing unit, sunmica board and brine tank.

We are engaged in manufacturing and supplying Air Conditioning Test Rig from Ambala, Haryana. Our Test Rig is widely preferred across the country to accurately measure the cooling capacity of the air conditioner. Customers can obtain Air Conditioning Test Rig in retail or bulk orders from us at most economical rates.

Used for :

• To demonstrate fundamental compression cycle.
• To find the C.O.P. & cooling capacity
• To study the effect of heating, cooling, humidification& dehumidification for conditioning of air
• To study basic component of Air Conditioning systems.
• To study variation of capacity of the unit with different capillaries

• To study PH and psychometric chart

Details :

• To study the By Pass Factor of a cooling coil : Technical Specifications of the Equipment.

• Compressor :- ISI hermetically sealed compressor (1.5 Ton capacity).
• Condenser :- Fins and copper tube type Air Cooled condenser of capacity 1 H.P. has been provided in the unit.
• Condenser Fan motor :- One no forced draft fan motor of suitable capacity along with suitable capacity of fan blade has been provided to draft the air of condenser.
• Receiver :-  One no heavy duty sheet type receives along with valve fittings has been provided to store the liquid refrigerant to R-22 gas.
• Rotameter :- To measure the flow rate of R-22 in unit.
• Evaporator :- A air cooled evaporator is provided.
• Supply Duct :- A metallic supply duct is fitted containing DBT/WBT sensing probe and supply of steam for humidification.
• Boiler :- Boiler is fitted to standy to supply steam the effect of humidification.
• Heating Coil :- Heating coil is fitted inside the duct to study the process of heating.
• Control Panel Board :- The following controls have been provided on dull sunmica board.
• Main Switch, Voltmeter, Amp. Meter, Energy meter, Indication lights, Digital Temp Indicator, Suction gauge, Discharge gauge, LP/HP cut out, Expansion valve, capillary tube, Solenoid value, Filter dryer, Thermostat liquid line indicator.
• Base :- Heavy duty angle iron base has been provided in the unit to accommodate the condensing unit, sunmica board supply dull A/C body.