We offer Digital Impact Testing Machine. SHRI RAM INDUSTRIES The Pendulum Impact Tester Model SRI - IT 30 (E) is designed for conduction Izod & Charpy Test. The test methods confirm to BS:131:PART 4-1972 (Amended 15 Aug. 1993) & BSEN: 10045 - 2 :1993. The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. On release, the Pendulum swing down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture & height of raise after repture of the test specimenn and is read from Digital Panel.

Sri ctm 3000 kn digital display compression testing machine is mainly used to the compression test of building materials such as brick, cement and concrete, etc.

Digital Rockwell Cum Brinell Hardness Testing Machine

Model SRI -  RASNE (Manual Loading Unloading)

• Test force  60, 100, 150 for Rockwell, 187.5 & 250kg for Brinell
• LCD characteristic Digital Display for Rockwell scale with 0.1 LC and with USB port for PC communication.
• Brinell Microscope with BHN chart for BHN measurement.
• External Rotating knob for Auto Load Selection
• Manual Load - Unload
• Max test height – 210, Depth of Throat – 133mm

STANDARD ACCESSORIES

• Testing Table 50 mm dia- 1no.
• Testing Table 38 mm dia with “V” groove for round jobs 6-45 mm dia- 1no.
• Diamond Indenter (Rockwell)- 1 no.
• Ball indenter 1/16” with 5 spare balls- 1 Set
• Test Block Rockwell “C” 1 no.
• Test Block Rockwell “B” 1 no.
• Test Block BHN 2.5/187.5 1 no.

We offer universal fatigue testing machine. Shri ram industries (sri ftm 8): this machine is used to test the fatigue strength of materials and to draw s-n diagram by research institute, laboratories, material manufacturers and various industries. This is rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and located such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution.

We offer Analog Universal Testing Machine. The Machine operates on 415 volts, three phase 50Hz AC supply A. For Conducting Tension Tests Clamping jaws for testing round and flat specimens under Tension Tests. B. For Conducting Compression Tests A pair of compression platens, duly hardened, ground and polished with the bottom platen provided with guide-lines for placing the test specimen co-axial with the hydraulic ram. C. For Conducting BendingTransverse Tests A table with adjustable rollers, complete with mandrel for conducting BendingTransverse tests.

Shri ram industries offer torsion testing machine (sri tt 10), which are designed to check torsional property of various metal wires, tubes and bars. Further, we also calibrate these machines as per the latest and relevant industry standards.

We offer Digital Universal Testing Machine. Our range of Electronic Universal Testing Machine, having model 'SRI - UTE' series. Control panel can be hooked to any PC using RS-232 communication port. Offering exhaustive application this machine is aided with window based software packages with real time graph on PC which enables the user for effective evaluation of different parameters.

We offer impact testing machine. Shri ram industries offers a comprehensive range of impact testing machines. Our machine offers impact testing on both raw material specimen and finished components.

We offer sri ctm 3000 kn analog compression testing machine is mainly used to the compression test of building materials such as brick, cement and concrete etc.

SRI make Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also conduct.

Loading accuracy well within ±1% from 2% to 100% of capacity of the machine, conforms to IS:1828 / BS:1610

TECHNICAL FEATURES:

• Micro Processor based electronic panel.
• Precision strain Gauge type pressure transducer for load measurement.
• Rotary Encoder with rack for crosshead displacement indication with 0.1mm resolution.
• Digital Load, Displacement / Extension indication.
• Rs-232 Com. port for PC interfaces.
•  Window based software.
• Real time graph, user friendly software.
• Data entry for specimen dimensions, serial number, gauge length, Unit selection for load etc.
• Results include Load vs Displacement Curve, Maximum Load, Maximum. Displacement, U.T.S.- % Elongation. Young’s Modulus & Proof stress if Extensometer is use.
• Recording, storage & retrieval of results & details.

SRI make Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also conduct.

TECHNICAL FEATURES: -

• Micro Processor based electronic panel.
• Precision strain Gauge type pressure transducer for load measurement.
• Rotary Encoder with rack for crosshead displacement indication with 0.1mm resolution.
• Digital Load, Displacement / Extension indication.
• Rs-232 Com. port for PC interfaces.
•  Window based software.
• Real time graph, user friendly software.
• Data entry for specimen dimensions, serial number, gauge length, Unit selection for load etc.