Shubhlaxmi Engineers

Naroda, Ahmedabad, Gujarat

• Single rotating element, progressing cavities are generated which deliver a uniform, metered & non-pulsating flow.
• Head developed is independent of the rotational speed, where as the capacity is proportionate to the speed.
• Inherently self-priming, the pumps can work on snore & do not require a foot valve.
• Can Handle solids in suspension or medias containing a high percentage of solids.
• Suction lift capabilities of up to 9.5 mtr. and effective even in high vacuum conditions.
• Minimum degradation of shear-sensitive media & can also Handle highly viscous materials having pseudo-plastic characteristics.
• Due to the reversible rotation capabilities, progressive cavity pumps can perform with equal efficiency in either direction.
• Rotors turn inside a resilient stator & thus generate little noise.

• Special design for filter press application.
• Reduce gland leakage.
• Noise & maintenance free.
• Single stage open & semi open impeller
• Heavy duty shaft, sleeve and bearings
• Long life due to replaceable wearing parts.
• High efficiency low power consumption.
• Grease / oil lubricant bearings.
• Only positive (+V) suction head.
• Suitable with V-belt drive or direct coupled with a motor.

Vertical type with flange mounted motor, single stage, gravity suction, radial split volute casing with radial flow impeller, sealing Type : Gland packing, mechanical seal, hydraulic sealing.

• Axial thrust compensated by balancing drum.
• Barrel type construction.
• Multi stage with single suction die casting closed impeller.
• Heavy duty ball bearings capable to carry thrust load on either direction. grease lubricated bearing for longer life.
• Un-cooled soft-packing are provided with sealing connection on a suction side. for higher pumped media temperatures, a stuffing box can be provided with cooling cover facilitating the external cooling.
• All the flanges are faced and drilled as per din standards.
• Pump designed to drive by an electric motor through flexible coupling. direction of rotation is a clock wise viewed from drive ends. suction is nearer to coupling & discharge at other end.

• Self priming pumps with five mtr. suction lifts.
• Compact in size, low noise, high efficiency.
• Easy maintenance, longer life, economical.
• An inbuilt pressure relief valve.
• Bush bearing with a heavy shaft.
• Double helical gears to reduce axial thrust.
• Continuous duty. Handle multiple liquids.
• Unique design.

• Noise and maintenance free
• High efficiency hydraulic design
• Back pull out design
• Conform to iso 2858 dimensions
• Suitable with V-belt drive or direcct coupled with a motor.
• Heavy duty shaft, sleeve and bearings
• Low NPSH
• Single and double mechanical seal
• Steady head and capacity
• One roller bearing on pump end, two angular contact ball bearing with oil lubricated.
• Serveral flange drilling options according to valid standards.

• Designed to meet specific lengths & application requirements.
• Base plate designed to meet exiting support arrangements.
• Standardized & modular design.
• Standard shaft sealing by oil seal, mechanical seal or stuffing box packing.
• Connects the pump casing with the base plate.
• Column pipe protects the shaft.
• Supports the eventual intermediate bush bearings.
• Suction strainers, simple mounting & self priming.
• Optimized hydraulic performance.
• Compact design using less floor space.
• Close / Semi open impeller.
• Easy maintenance, replaceable parts.
• Heavy duty shaft, sleeve & bearings.