• True Metal Working Coolant And Capable Of Easily Handling Grinding, Sawing, Turning, Boring, Milling And Drilling Operations
• Stable And Transculent Solution Over A Wide Range Of HardnessAnd Temperature
• Non Corrosive To Steel, Cast Iron, Brass, Cpper, Alluminium, Mlid Steel And Carbide Tools
• Most Effective Bacterial Protection

Long life combined with good milky Emulsion stability, multipurpose in application. Lumipro - 250 is a versatile, compounded, water soluble cutting oil designed primarily as a lubricant and coolant for cutting & grinding operations on both ferrous & non ferrous metals. Lumipro - 250 has proven outstanding as a coolant for heavy duty machining operations, as an emulsifiable hydraulic oil and as a rust preventive.

Long life combined with good milky Emulsion stability, multipurpose in application. Lumipro - 450 is a versatile, compounded, water soluble cutting oil designed primarily as a lubricant and coolant for cutting & grinding operations on both ferrous & non ferrous metals. Lumipro - 450 has proven outstanding as a coolant for heavy duty machining operations, as an emulsifiable hydraulic oil and as a rust preventive.

It is specially designed to avoid varieties of oils for different operations and metals, ferrous and nonferrous. Lumicut - 650 is enriched with effective and unique extreme pressure additives derived from Sulphurized fats and effective surface tension depressants, which ensure direct contact of oil with the cutting edge. The effectively designed and formulated extreme ressure additives provide oil film of high strength, which withstands the heavy load of boundary lubrications. It can serve all the operations such as gun drilling, gear grinding on automats and moderate feed rates for gear Hobbing and broaching etc. However its not suitable for honing operations.

Lumicut - 750 is low viscosity oil blended in selected, low sulfur content mineral oil. It is loaded with high EP additives gives easy machining for gun drilling, gear grinding, threading, and grinding and valve seat grinding operations & especially for super finishing. Excellent flushing properties helps to keep the paper strip clean all the time, providing super finished jobs with greater consistency. It provides excellent lubrication to tool and slides.

Lumicut -950 is formulated by using highly refined low viscosity mineral oil, with minimal aromatic content. Unlike conventional Honing oils, Lumicut-950 is free from any common Chlorine and sulphur additives. Special types of EP additive used in Lumicut-950 take care of easy penetration of the oil to the point of operation. Low viscosity ensures easy effective flushing and cooling. It has very good flushing properties. The extreme pressure additives gives a film of good strength; this help in giving excellent finish and good tool life and no burning marks on machined components. It does not stain non-ferrous like Brass, Copper etc. and protects Cast-iron from rusting. Non-use of Chlorine & sulphur compound in Lumicut-950 is hygienically safe to operator. Lumicut-950 is very effective for Honing, Drilling, Boring, and Lapping operation.

• True Metal Working Coolant And Capable Of Easily Handling Grinding, Sawing, Turning, Boring, Milling And Drilling Operations
• Stable And Transculent Solution Over A Wide Range Of HardnessAnd Temperature
• Non Corrosive To Steel, Cast Iron, Brass, Cpper, Alluminium, Mlid Steel And Carbide Tools
• Most Effective Bacterial Protection

Long life combined with good milky Emulsion stability, multipurpose in application. Lumipro - 250 is a versatile, compounded, water soluble cutting oil designed primarily as a lubricant and coolant for cutting & grinding operations on both ferrous & non ferrous metals. Lumipro - 250 has proven outstanding as a coolant for heavy duty machining operations, as an emulsifiable hydraulic oil and as a rust preventive.

Long life combined with good milky Emulsion stability, multipurpose in application. Lumipro - 450 is a versatile, compounded, water soluble cutting oil designed primarily as a lubricant and coolant for cutting & grinding operations on both ferrous & non ferrous metals. Lumipro - 450 has proven outstanding as a coolant for heavy duty machining operations, as an emulsifiable hydraulic oil and as a rust preventive.

It is specially designed to avoid varieties of oils for different operations and metals, ferrous and nonferrous. Lumicut - 650 is enriched with effective and unique extreme pressure additives derived from Sulphurized fats and effective surface tension depressants, which ensure direct contact of oil with the cutting edge. The effectively designed and formulated extreme ressure additives provide oil film of high strength, which withstands the heavy load of boundary lubrications. It can serve all the operations such as gun drilling, gear grinding on automats and moderate feed rates for gear Hobbing and broaching etc. However its not suitable for honing operations.

Lumicut - 750 is low viscosity oil blended in selected, low sulfur content mineral oil. It is loaded with high EP additives gives easy machining for gun drilling, gear grinding, threading, and grinding and valve seat grinding operations & especially for super finishing. Excellent flushing properties helps to keep the paper strip clean all the time, providing super finished jobs with greater consistency. It provides excellent lubrication to tool and slides.

Lumicut -950 is formulated by using highly refined low viscosity mineral oil, with minimal aromatic content. Unlike conventional Honing oils, Lumicut-950 is free from any common Chlorine and sulphur additives. Special types of EP additive used in Lumicut-950 take care of easy penetration of the oil to the point of operation. Low viscosity ensures easy effective flushing and cooling. It has very good flushing properties. The extreme pressure additives gives a film of good strength; this help in giving excellent finish and good tool life and no burning marks on machined components. It does not stain non-ferrous like Brass, Copper etc. and protects Cast-iron from rusting. Non-use of Chlorine & sulphur compound in Lumicut-950 is hygienically safe to operator. Lumicut-950 is very effective for Honing, Drilling, Boring, and Lapping operation.