• Measurement Accuracy1.0 % ± 1 Digit 5.0 % ± 1 Digit (1999µF & 19.99 milli Fared ranges)
• Indication meter3 ½ Digital (½ inch LED panel Meter)

The Digital Capacitance Meter is a precision instrument capable of measuring a wide range of capacitance values. It covers the range of low value ceramic and styroflex capacitors to the high value range of electrolytes.The instrument uses solid state, low drift circuitry to ensure a stable reading and a high accuracy. The instrument is ideally suited for quality control departments as well as electrical and electronic industry.

• Open Circuit Voltage0 to 5 KV OR 0 to 10 KV AC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Digital Panel meter.
• Power Requirements230 volts AC, ± 10%, 50/60 Hz

High voltage breakdown tester OR HV Tester is useful for measurement of breakdown (flashover) voltage of electrical components, insulation materials instruments, transformers, etc. can be used to ascertain quality of insulation material before planning their usage in electrical applications. The front panel incorporates all controls for operation of the unit. Easy to use test probes with micro-switch supplied to connect the output high voltage to the device under test.

• Weight5 Kgs

Test Frequency:With Built-in Frequency 800Hz and 5KHz. (Ext. Oscillator 500Hz to 20KHz), Test Frequency Accuracy:± 1%, Impedance Range:0.1Ohm to 19.99KOhm in three Ranges i.e. 199.9 Ohm, 1.999KOhm & 19.99Kohm, Impedance Range Accuracy:± 1% of Reading ± 1 digit, Indication:3 ½ Digit Panel Meter, Built-in Cal. Facility:1K ± 0.1%, Power Supply (max.):230 VAC ± 10%; 50 Hz60Hz Single Phase 25VA

• Measurement Accuracy1.0 % ± 1 Digit 5.0 % ± 1 Digit (1999µF & 19.99 milli Fared ranges)
• Indication meter3 ½ Digital (½ inch LED panel Meter)

The Digital Capacitance Meter is a precision instrument capable of measuring a wide range of capacitance values. It covers the range of low value ceramic and styroflex capacitors to the high value range of electrolytes.The instrument uses solid state, low drift circuitry to ensure a stable reading and a high accuracy. The instrument is ideally suited for quality control departments as well as electrical and electronic industry.

• Open Circuit Voltage0 to 5 KV OR 0 to 10 KV AC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Digital Panel meter.
• Power Requirements230 volts AC, ± 10%, 50/60 Hz

High voltage breakdown tester OR HV Tester is useful for measurement of breakdown (flashover) voltage of electrical components, insulation materials instruments, transformers, etc. can be used to ascertain quality of insulation material before planning their usage in electrical applications. The front panel incorporates all controls for operation of the unit. Easy to use test probes with micro-switch supplied to connect the output high voltage to the device under test.

• Weight5 Kgs

Test Frequency:With Built-in Frequency 800Hz and 5KHz. (Ext. Oscillator 500Hz to 20KHz), Test Frequency Accuracy:± 1%, Impedance Range:0.1Ohm to 19.99KOhm in three Ranges i.e. 199.9 Ohm, 1.999KOhm & 19.99Kohm, Impedance Range Accuracy:± 1% of Reading ± 1 digit, Indication:3 ½ Digit Panel Meter, Built-in Cal. Facility:1K ± 0.1%, Power Supply (max.):230 VAC ± 10%; 50 Hz60Hz Single Phase 25VA