Sikka Precision Technologies

M.I.E., Bahadurgarh, Haryana

• MaterialStainless Steel
• Frequency50 Hz
• PhaseSingle
• Automatic GradeSemi-Automatic
• Operating Voltage220 V
• LayoutVertical

Advantages 1.well hardened and ground with spring steel material. 2.well bore finish with an accurate size. 3.the degree of our collet is so accurate that makes the life of collet very long. 4.our collets are with the accuracy of 0.003mm-0.004mm.

Sikka manufactures drill collets of a-3 & a-42.the drill collets are used in automat's tailstock, capston & turret etc. The external thread of the collet draw the collet and the holding sleeve clamp the drill. We have a wide range of drill collets in our stock. advantage 1.well hardened and ground. 2. Accuracy in size that makes the life of drill longer in any condition.

Sikka manufactures r-8 collets for milling machines. R-8 collet is used for clamping the cutter, drill etc. R-8 collet is also known as m1tr collet. We have a wide range of tequar collets in our stock.the collets are ready in two type of threads, one is of 12x1.5mm and other one is of 12bsw thread. Advantage of sikka r-8 collet 1 .superb quality with spring steel material. 2. Concentricity of the collet is 0.005mm. 3. Well hardened and grinded collet by which the life of the machine's spindle will be longer. 4. Taper degree is confirmed and accurate to control the concentricity.

We use extremely high quality raw material in manufacturing Feed Fingers. We manufacture Feed Fingers for wide range of machineries. Our manufactured Feed Fingers are available in various shapes and sizes. Using it initially, Feed Fingers can be re drilled for achieving a larger size.

SIKKA Rigid tapping collets are manufactured with an internal square tang that keeps the tap from spinning within the collet during use. These rigid tapping collets are compatible with taps per DIN, ISO, JIS and ANSI standards.

Tequar manufactures Boring bars for milling machines and boring machines. We are the leading manufactures and exporter in India for different kinds of boring bars in ISO, MORSE TAPER, BT, R8 Standard etc. ADVANTAGE OF TEQUAR BORING BARS Well hardened and ground with suitable material Accuracy with in 0.006mm-0.007mm Square or flat key to holding the tool is very accurate Superior Quality with Good Service

Sikka manufactures and supply Precision Spindles for Any Types of Special Machine. We are using high graded case hardened material with grounded finish. We are mainly manufacturing Spindles of Automats, Sliding Heads & SPM . Sikka Spindles For Automats (Traub machines) Sikka manufacturing Spindles for Automats (Traub machines) .Automats are of many types like Single Spindle Automatic Lathe(Traub) A-15, A-20, A-25, A30, A-32, A-42 & A-60 .These machines are total depends on Spindle. The Accuracy of the Sikka spindle is in 0.002mm - 0.003mm. Sikka Manufacturing Spindles for Sliding Heads and Special Purpose Machines (SPM) are made as per order.

Tequar manufactures a wide range of Revolving Centers used in variety of machineries. We manufacture highly durable and reliable Revolving Centers. These Revolving centers are pressed and preloaded to avoid starting loads, hardened and ground steel with 60° tip angle. Contaminants and coolants are not the matter of worry because these can be avoided installing already well lubricated Revolving Centers of ours.

The Guide Bush we manufacture has capacity to bear high load while working on heavy duty machines like food processing machine, textiles machine, automobile production machine, chemical machine etc. Once having installed our Guide Bush in high load machines there is no need to worry about anti corrosion and resistance of chemical. Whether it is steel or iron factory machines, Guide Bush of ours keeps working in high friction. We can also provide you Guide Bush based on the sample and drawings provided by the customers.

Sikka manufactures grinding collets of good quality. Grinding collets are used in the process of grinding that supports the tool perfectly. We use raw material of good quality in the manufacturing of grinding collets.

Sikka manufactures taping collets for taping machines to clamp the tap. Tap collets are of diffrent sizes and in diffrent shapes.we can undertake any special tap clamping collets as per drawing , sample or with any specification. We can also make collets in metrics, inches etc. The great thing of sikka taping collets is the best service provided by us to the customer with super fast service in india. Advantages of sikka taping collets : 1.long life with well hardened and ground. 2.these collets have locking square system inside the collet.

sikka manufactures and supplies expanding collets for holding the internal diameter of the job. These collets are not standard ones. These collets are made as per drawing, sample or any specification.

We are the leading manufacturer of external threaded collets of high quality and precision using good quality raw material so that durability of these threaded collets can be long. We keep in mind the accuracy in terms of size. These collets are manufactured in metric sizes and inches. We provide our external threaded collets at economical price.

We manufacture all kind of collet with perfection and capability as per drawing or sample. advantage 1. Provide fast and effective service. 2. First priority of ours is customer's satisfaction. 3. Made of high grade steel and well hardened and ground.

sikka manufacture reverse taper collet used in some special kind of machines.these collets are used to clamp the rod or bush. we can manufacture all kind of taper collets as per drawing or sample provided by you to our dedicative team. after cosidering the sample or design, we manufacture the desired one.

Sikka manufacture and supplies iso collets. Iso collets are of three type. Iso collets are of e-32, e-40, e-50. These collets can be used for clamping the cutter, reamering, drilling etc. A wide range of iso collets are always ready in our stock. Advantages of sikka iso collets : 1.spring steel collet with hardened and ground. 2.polishing in internal bore of iso collets are very superior by which the life of cutter and adaptor will be longer. 3.can be fitted in any brand of iso adaptor. 4.the concentricity of tequar iso collet are in 0.004mm.

We use extremely high quality raw material in manufacturing feed fingers. We manufacture feed fingers for wide range of machineries. Our manufactured feed fingers are available in various shapes and sizes. Using it initially, feed fingers can be re drilled for achieving a larger size.

Sikka manufactures and supplies double taper collet used in special spindles in which upper and lower chamber hold the collet for gripping. Advantage of sikka double taper collet . Both the tapers are well ground . Long life and perfect in accuracy.