Silitronix Systems is a prominent Manufacturer and Supplier of world -class Battery chargers. The wide demand of our premium quality chargers can be attributed to.

• Models :We manufacture different types of Fully Automatic Battery Chargers with all kinds of Protections. Our Battery Chargers are based on
  
  
  Constant Current (CC) / Constant Voltage (CV) --- SRC Based Technology.
  Constant Voltage (CV) --- SMPS Based Technology.
  Float Cum Boost Chargers --- Conventional Technology.
  Constant Voltage for Two wheeler VRLA Battery Chargers for Single Battery & Multiple Battery Chargers --- Micro controller Based intelligent technology.

• Meters :We manufacture the Battery chargers along with different kinds of meters like which helps in precise Monitoring & Controlling the Charger's output Voltage & Current.
  Digital D.C. Volt Meter / Ampere Meters.
  Analog D.C. Volt Meter / Ampere Meters.
• Chargers Out Put :Our Battery Chargers are provided with Unique.
  Output: 12 V to 120 V D.C.
  Capacity: 1A to 25A & above as per requirement.
• Protection :Our Battery chargers are protected against Dangers of
  Over Load: Using MCB & Electronic Relay tripping Devices.
  Over Voltage: Using Electronic Relay tripping Devices.
  Reverse Polarity: Using Intelligent Battery Sensing Devices.
  Battery Healthy Connection: We provide a LED Indication for this purpose, who takes care of Interconnection between more than Two batteries. This indication is offered in multi Battery Chargers, our Model: BCH / 501.

We manufactures Different Types of Analog & Digital Timers for different kinds of Industries & there applications.

We manufactures Micro Controller based Digital Timers with Up Time Count facility, most Sturdy, accurate & reliable in industrial Envourment. It is available in Panel Door Mounting type 96 X 96 mm DIN standard ABS Plastic Cabinet. Two set of control contacts are provided.
Two types of Operational Timers are available.

• Single Set Time by 3 Digit Thumbwheel switches.
• Two Set Time by 3 digit thumbwheel switch. Two individual relay control contact provided for Set Time -1 & Set Time 2.

Its operation is available with different way.

• By start / Stop Push Button
• During Mains ON

Time Range also available as

• 0 To 99.0 Second
• 0 To 999 Second

We manufacture this timer with most rigid, reliable & repeat accuracy. It is available in chassis mounted DIN Rail ABS plastic cabinet with Top facing 12 way screw terminals.
We supply with different operations as

• Delay ON type
• Delay OFF type
• Cyclic type
• Diesel Engine Cranking Timer

Above all types of timers available with wide range of input supply as

• 110V, 230V, 440V A.C.
• 12V, 24V, 110V D.C.

In Delay ON / OFF model, Different standard Time range available as

• 0 To 10 Second.
• 0 To 30 Second.
• 0 To 60 Second.

We manufacture Photocell Control Systems that are used in different industrial operations for varied processes. The main features which make our systems stand apart from others available in the markets are.

Variants :Our photocell control systems are available in three different variants :

• Through Beam
• Retro Reflector
• Diffuse Type, which cater to different needs of our diverse client base.

These sensor are three wire systems with different Diameter , which cater to different kinds of Industries to satisfy needs of our diverse client base. They are available with two types of Out Puts & Different ranges as under.

Out Put Available
NPN / NO / NC
PNP / NO / NC

Distance Range
5 mm to 15 Feet

Control Systems
We manufactures a Control system in DIN Rail Mounting type cabinet having features as Under.

Input Supply
230 V / 440 V A.C.
12 V / 24 V D.C

Control Contact
Our control systems offers One Set of Potential Free Control Contact with 2 Amp. Capacity.

LED IndicationsMains ON , Control ON Different Colourd LED Indications available on Dial.

We are one of the leading manufacturers and supplier of world class engraving and etching machines, that are useful in different industries.

• Performance :-Our engraving and etching machines undertake etching process which does not involve any stress development, no deformation and no molecular disturbance. It is Useful in fine, precise and clean metal removal work.
• Operations :-Our Etching Machines are operated on electrochemical process and using hand held pad you can remove metals from selective area for number of applications. This machine is capable of etching a large variety of ferrous and non ferrous metals.
• Applications :-The Etching Machines provided by us are used in leather goods industries; metal punches manufacturing units, steel testing labs.
• Other features :-The engraving machines manufactured by us are light weight, simple to install and use, robust design, high performing and many other centers.
• Voltage :-These machines operate on 230 V AC.

Advantages :-

• No Vibrations
• No Moving Parts
• No Size Restrictions
• No Noise
• No Ink or Acid
• Harder The metal, Better the Etching

We Manufacture different models as per below list :-

• Logo Etching & Marking
• Logo Marking
• Etching Pencil
• Portable Platting
  Rich Gold
  Rich Gold High Build

This product is useful for Control And Relay Panel (C & R), which is used for remote control Panel of Transmission Line. It Indicates Circuit Breaker is on or OFF. It is Panel Door Mounted Type with side Clamp.

When Circuit Breaker is ON, Green LED Light ON.When Circuit Breaker is Trip OFF, Red LED Light ON.
Different Operating Input Supply is available, Like 24 V D.C., 110 V D.C.,
There are Two Models available with different Diameter.

• SI / 42 -- 42 mm Diameter X 110 mm Depth.
• SI / 72 -- 72 mm Diameter X 110 mm Depth.

Silitronix manufactured this product very useful for Battery Manufacturers. A care is taken to withstand Acidic Environment. Battery Plat Curing process required two controlled Parameters

1. Temperature of Battery Plate Curing Chamber.2. Moisture of Battery Plate Curing Chamber.
This System is manufactured under two divisions.

1. Heater & Fan Enclosure.2. Heater & Fan Control Panel.

It is manufacture form SS304 which can withstand in Acidic Environment against Corrosive. It is Wall mounting type Enclosure includes following items.

• Appropriate capacity of Heater is incapsul in SS304 Spiral Pipe.
• 230 V Fan is Mounted behind Heater to Blow hot air in the Plate curing chamber. It is always On during Heater ON.
• A Temperature Sensor is mounted at the bottom of this Cabinet to readout Chamber Temperature.

It is a wall mounted type control panel. It includes

• Digital Temperature Controller.
• Heater Control Contactor.
• Input Power ON / OFF DP MCB.
• Lamp Indicator for Input Mains ON & Heater ON.
• Fan ON / OFF Selector.

• Through Beam
• Retro Reflector
• Diffuse Type, which cater to different needs of our diverse client base.
• These sensor are three wire systems with different Diameter , which cater to different kinds of Industries to satisfy needs of our diverse client base. They are available with two types of Out Puts & Different ranges as under.

• NPN / NO / NC
• PNP / NO / NC

• 5 mm to 15 Feet

• We manufactures a Control system in DIN Rail Mounting type cabinet having features as Under.

• 230 V / 440 V A.C.
• 12 V / 24 V D.C

• Our control systems offers One Set of Potential Free Control Contact with 2 Amp. Capacity.

• Mains ON , Control ON Different Colourd LED Indications available on Dial.

• Technology :- Our OEM Products come with micro controller based PC interface and FIT control systems which are the latest technological innovation in Road Building Machinery and Drum Plant Mix
• Operative Principle :- Our OEM products are designed to use variable D.C. current source for linear hydraulic valve operation in Paver M/C
• Applications :- The OEM products provided by us are widely used in different industries like Plastics, Chemicals, Water Treatment, Control Panel, Pharmaceuticals, Printing and Cutting, D.G.Sets etc

• Textile
• Plastic
• Chemicals
• Water Treatment
• Control Panel
• Pharmaceutical
• Printing & Cutting
• D.G. Sets
• Paver M/c
• Drum Mix Plant
• Electro Plating M/c.
• Logo Etching / Marking M / c

SILITRONIX offers a unique and compact Water Controller Systems, ideally suitable from normal water to having ultra low conductivity. It is easy in operation user friendly. A Sensitivity Potentiometer is provided specially for low conductivity water particularly suitable for R. O Plant & Pharmaceutical Machinery. Silitronix Systems is proud to present highly advanced Water Controller Systems which are known for its advantages

• Input Supply :110 V, 230 V, 440 V A.C, 24 V D.C.
• Sensor Input :Reference, Low & High Inputs are provided to Sense Lower & Higher Level of Water in the Tank. These Inputs are having very High Input Impedance protecting from De-ionizing, which happens in most of Other Makes of LLC. We have Designed LLC system in such way, Reference can be mounted on the Vessel Body. It has been observed that if More than one LLC is used in the same Vessel there is always some malfunction. We at SILITRONIX have designed Our LLC in a novel way that it is possible to use number of LLC and connecting reference of all LLC with the same Vessels Body. Even if negative of Input 24 V D.C. Supply accidentally gets connected to your Vessel's Body, Performance of our LLC will not be affected.
• Controls :Two Sets of Potential Free Control Contacts available with 2 Amp. Capacity.
• Indications :Two LED are Provided On label:M: RED LED for Mains ON - Input Supply O.K.C: Green LED for Control ON Pump / Motor Should ON.

Different Models are Available in Liquid Level / Water Level Controller :

• LLC / 100, LLC / 305 for Low Conductivity of Water.
• WLC/ 400, WLC/401/, WLC/403 For Normal water.

Utility / Selection OF Different Models :

LLC / 100 :It is useful for a Single Tank with a water, Conductivity ranges from 1.0 to 5.0 Micro Semen -- Three sensors to be used.
LLC / 305 :It is useful for a Single Tank with a water, Conductivity ranges from 0.0 to 1.0 Micro Semen. (Less than 1.0 Micro Semen)
Three sensors to be used.
WLC /400 :It is useful for a Single Tank with Raw Water - Three sensors are to be used.
WLC /401 :It is useful for a Underground & Over head Tank with Raw Water - Six sensors are to be used.
WLC /403 :It is useful for a Single Tank with Raw Water with Each sensor Lo, Mid, Hi - Individual control relay contact available.-
Four sensors are to be used.

Enclosure :All LLC Models are available in ABS Plastic Din Rail Mounted type Cabinets with Top side 12 Way Collate Type Screw Terminals with inbuilt washer facility.

Applications :Automatic Water level Controller useful for Vessels of Pharmaceutical Machinery, R. O. Plant, D.M. Water Plant, Over Head Tanks of Hotels, Factories, Homes, Apartments, Commercial Complexes, Drainages, etc.

Materials of Construction Of Sensor :Sensors is made from SS with nylon bush protect against corrosion & highly insulated from Tank body to avoid leakage & Electrical noise.

• Current Source : Useful to Drive Proposal Hydraulic Valve used in PAVER Machine.
• Control Instrument with Computer / Printer Interface : Useful for Drum Mix Plant used in Road Building Machinery.
• Current To Voltage Converters & Its Digital 3 Digit Read Out As a Process Indicator Useful to many Electronic Pressure / Temperature / Moisture Sensors / Transducers Devices, Variable A.C. Drives Offering out Put as 4 To 20 mA. We Offer Different Models of Instruments with Input signal as 4 To 20 mA.
• 3 Digit Digital Read Out From 0 To 1999 as a Process Parameter Indicators like RPM Meter, Speedo Meter etc.

We have also done indigenous development as import substitute for many OEMs & prove us as a Quality product manufacturer, not on papers only but also in practice.

• Linear Technology : It Offers Best Stabilized D.C. Out Put and Full Protection against Over Load & short circuit by Fold back Technology.
• SMPS Technology : This technology Offers Best Stabilized D.C. Out Put in most compact dimension with low ripple in full load condition for continuous Operation. It is protected against Over Load & short circuit. It also offers Wide Input Supply range.

• Input : 230 V
• Output : 5V, 12V, 24V D.C.
• Capacity : 2A to 10A
• Protection : Against Over load & Short Circuit.
• Cabinet : Chassis Mounted / Table Top models available.

• Input : 230 V
• Output : 0 to 30 V D.C.
• Capacity : 0A to 3.0A
• Protection : Against Over load & Short Circuit.
• Cabinet : Table Top model available.
• Meters : Digital D.C. Volt Meter & Ampere Meter are provided to set Out put Voltage & Maximum Current available to Load
• Settings : A Potentiometer is provided for changing Out put Voltage From 0 To maximum. A Potentiometer is provided for changing Out put Current Capacity From 0 To maximum.
• Materials of Construction : Our power supplies are made from premium quality materials which offer durability and sturdy structure to it.
• Applications : Our power supplies are used in different industries like Banks, Water plants, power plants, storage houses, control panels to drive PLC , Solenoid . pharmaceuticals and textile industry.

• Sturdy Structure
• Latest Design
• Advanced Technology
• Multiple applications

• Plastics
• Chemicals
• Water Treatment
• Control Panels
• Water plants
• Power Plants
• Storage Houses