The foot grounders provide a continuous ground path between the operator and a properly grounded ESD protected flooring. Foot grounders are designed for use in applications where user mobility is required, such as wave solder, kitting, and quality control. Foot grounders quickly and effectively drain the static charges which collect on personnel during normal, everyday activities.
- Two foot grounders are recommended for reliable grounding and ESD protection, providing ground when one foot is off the floor.
- The grounding tab should be tucked inside the shoe with as much contact area as possible to the bottom of the stockinged foot. Foot grounders rely upon the perspiration layer inside of the shoe to make contact through the stocking.
- Operator is grounded when foot is in contact with grounded dissipative or conductive flooring.
- For most applications, a current limiting resistor in series with the grounding tab is recommended.
- It is not recommended to use foot grounders where exposure to line voltages above250V AC is possible.
Specifications
- 0.070'' thick, 1.5'' with, three layer laminated, rubber sole. White Color inner layer is insulative styrene-butadiene-rubber. Outer black colored layer is conductive styrene-butadiene rubber.
- Burgundy, grounding polyester ribbon tab, 18''/30'' long with 8 conductive nylon strands, two-sided reversible, may be positioned on either side of foot.
- Built in 1 Meg ohm resistor.
- No Silicone is used in the materials that make our foot grounders
GST : 29AAGPM3558B1ZQ
4.7/5
Mr. Sanjiv Marathe & Mr. K.S.Nagaraju (Singapore India Trade Resources Co.)
52, 1st Cross Road, R.T. Nagar Post, Dinnur, Bangalore, Karnataka - 560032
Share us via
