Other Products / Services #1380939

We are offering roller mill. introduction & working principle:singhasini 3 5 roller mill with integral separator provide an automatic comparatively dust free complete system for medium to fine grinding and classification of minerals ores. the grinding operation in singhasini 3 5 roller mill is performed on the principle of attrition and compression, which results due to the centrifugal force generated from the suspended rollers running inside a stationary bull ring. the mineral to be pulverized enters the grinding chamber through an automatic feeder and falls onto the mill floor whereby it is scooped up by steel ploughs into the nip space between the rollers and the bull ring where grinding takes place. a constant quantity of air is circulated through the mill and system. The air from centrifugal blower enters the mill through a series of tangential ports round the base of grinding chamber and sweeps the fine and medium fine mineral to the classifier above the grinding chamber leaving no ground material in the chamber and allowing the rollers to work efficiently crushing the coarse mineral. the classifier separates the pulverized mineral and coarser particles return back to the grinding chamber for further size reduction. Fine mineral is carried by air to the cyclone air separator where air and ground material are separated and collected. The clean air is returned to the blower for close circuit grinding operation. for providing dustless operation, the mill is operated under negative pressure and is equipped with dust collection system where surplus air in the circuit is vented and fine dust is collected in the dust collector bags. description: the following are the main parts of the roller mill: 1. Grinding chamber. 2. Classifier. 3. Cyclone air separator & tank. 4. Centrifugal blower. 5. Dust collector and connecting pipes. 6. Automatic feeder.

SINGHASINIScrew Elevators are widely used in all industries for handling of bulk solids . For an efficient operation the design has to be matched for the specific duty and characteristics of the bulk material to be handled . Particular care is required with infeed arrangements for optimum performance . All our elevators are individually designed and manufactured to secure the best results for each application.

STANDARD SPECIFICATION :

• Inclination upto 90 can be accomodated.
• Gravity feed options are available.

OPTIONAL EXTRAS :

• Clean out doors.
• Alternative material of construction and finish.
• Drive arrangement to suit individual requirements.
• Split casings for easy cleaning.
• Chute of hopper style inlets.
• Mobile or fixed units.
• Dust extraction hoods.
• Jacketed construction suitable for steam , oil or water.

Screw Elevators are tailor made and sizes depend on individual requirement, should you require any information please feel free to get in touch with us.

SINGHASINIScrew Feeders are used at the bottom of Bins , Silos or Feed Hoppers to feed material at a controlled rate into a Grinding or to introduce material into positive or negative conveying systems . A Screw Feeder consists of a screw which turns at a given RPM in close clearance to its casing . The casing may be circular or U trough . Material of construction is M.S. / SS316 / SS304 or any other as per the nature of product

Screw Feeders are tailor made equipments and sizes depend on individual requirement, should you require any information please feel free to get in touch with us.

SINGHASINIReactors are extensively used by many Chemical Process Industries Viz. Pulp & Paper, Food, Polymerization, Coagulation & Flocculation, Pharmaceuticals, Paint and Breweries etc . Design of Reactor depends on host of features such as R.P.M., Size of Tank, Physical Properties of Fluid, Presence of Baffles and Heat of Reaction etc. Reactor / Agitator / Mixer have wide application in Heat Transfer. Mass Transfer and Dispersion equipments. Types of Impellers used are Marine type Propeller, Pitched Blade Turbine, Curved Blade Turbine, Anchor Impeller, Helical Screw Impeller and Flat Blade Turbine . Wide applications warrant the use of various material of construction such as M.S., SS304 / SS316x, Rubber lined, PVC lined etc. Stuffing box and Double Mechanical Seals with Siphon assembly are provided as per requirement .

Reaction Vessels / Agitators / Mixers are tailor made equipments and sizes depend on individual requirement, should you require any information please feel free to get in touch with us.

SINGHASINIoffers Digital (Automatic) Feed Controller suitable for operating Pulverisers automatically & to achieve maximum feed rate. It is seen that all the Pulverisers have problems regarding armature burning of Heavy & Expensive Motor due to uncontrolled feed / overloading in the machine & consequently all the Pulverisers are generally run at a lower ampere load resulting in less production. Further, due to operator / labor negligence, the machine often runs idle or at a much lower ampere.

SINGHASINIDigital (Automatic) Feed Controller solves all the above problems. The Controller feeds the material into the Pulveriser based upon the ampere load of the main motor, cuts the feed if the machine runs on overload and increases the feed if the machine runs on under load condition. Further, if due to any reason the machine is being run at a lower ampere than given, the signal goes to the Hooter.

SINGHASINIOffers Controllers in two sizes:

• Digital (Automatic) Feed Controller model Autofeed-1, Suitable for main motors up to 60 H.P.
• Digital (Automatic) Feed Controller model Autofeed-2, Suitable for main motors of 75 to 100 H.P.

SINGHASINIwelcomes your company to our Metal Fabrication and Assembly Facility. Our Machining, Sheet metal Fabrication and Assembly facility consist of advance equipment, highly motivated and experienced personnel which have been with our company for many years. We have been in business over 40 years. Our 20k sq. ft expandable facility consist of Metal Fabrication Production , Mechanical Test and Quality Control . We are capable of doing Turnkey to your specification and have a full fledged design check service facility.

The parts we fabricate are being used in Mineral and Chemical Process Industry.

We have an extensive background with handling all type of materials ferrous, nonferrous, exotic metals and casting. We have experience in the fabrication of stainless steel parts and weldments for high pressure and high vacuum systems.

Additionally our staff will interface directly with your engineering personnel to improve quality and reduce the cost of the production and proto-type parts.

we are offering centrifugal blower.fan duty - for handling air, hot flue gas, dust, fibrous material and corrosive gases.material of construction - carbon steel , stainless steel , aluminium , rubber lined , epoxy painted , chlorinated rubber painted . construction - corrosion and acid resistant fans, wear protected , explosion protected, gas tight fans, poisonous and risky gas fans. bearings - ball bearings, roller bearings, oil lubricated bearings, grease lubricated bearings, water cooled bearings. shaft seals - metal asbestos seal, labirinth seals, packed stuffing box, stuffing box with intermediate pressure relief chamber. housing - steel fabricated welded construction braced with steel flats and angles. split casing can be provided for large sizes. inspection door and drain plug can be provided. impeller - impeller can be made in light , medium and heavy construction class i , ii and iii. steel or cast iron hub will be welded, bolted or riveted. impeller will be statically and dynamically balanced . shaft shaft are of en - 8 ss316 ss304 properly sized to keep away from critical speed. bearing life - bearings are designed for long life . this life can be attained when properly lubricated, kept clean, tensioning belts correctly and keeping impeller clean and balanced. smaller v pulleys and improper belt tensions reduces the life considerably. proper care and lubrication increases the life beyond this. vibrations - vibration isolators and flexible connections at inlet and outlet can minimize transmission of vibration and noise to building structure and ducts.

SINGHASINIConical Mixer consists of a partly filled container rotating about a horizontal axis. Suitable for blending lighter dry, free flowing powders, during blending a small quantity of liquid may also be sprayed into the mix. Internal baffles may also be provided.

Suitable for blending of Chemicals, foods, drugs, medicines, cosmetics, plastics, dyes, fertilizers, insecticides, animal feeds & many other products.It is a batch type of operation and a tailor made machine.

Conical Mixers are tailor made mills and sizes depend on individual requirement, should you require any information please feel free to get in touch with us.

SINGHASINIBag Filters use the well proven air pulse jet cleaning system . The Filter casing has tubular filter sleeves, supported on wire cage . Dirty gas is cleaned by dust particles clinging / stopping on the filter media surface . Clean gas flows on through the filter sleeve and out from the top of filter mounting tube sheet . These Bag filters when used can arrest particles down to 1 micron in size with fairly good collection efficiency .

The Tubular Filter Sleeves are neatly grouped in row of multiple elements . While the filters remain on service , through an auto time sequencing system they are back washed by a strong pulse of compressed air which shakes loose the accumulated dirt particles . The dust falls to the collection hopper and is out through Air Lock Valve.

We also supply special Bag Filters to handle potentially explosive materials by incorporating Explosion relief valves and using special Anti-Static Filter Media and mounting accessories . For continuous duty only compressed Air / Gas is required besides few Watts control power .

We offer metal recovery from dross. singhasini metal sepration from dross system: singhasini metal sepration pulverisers are impact type, high speed, air swept, swing hammer type, multipurpose grinding mills capable of grinding & separating heavier metal particles lumps from the feed dross straight from the ginding chamber on continuous basis through a special type of metal separation attachment supplied with the machine. The fine metal particles which get air borne along with the ash dross are separated by the cyclone separator and further by an external vibrating sifter screen. The main mill is supplied with manual feeder, heavy duty high efficiency cyclone air separator & tubular type open dust collector. The material of construction of internal parts of pulveriser main mill, cyclone air separator & dust collector varies as per individual requirement. The pulveriser is supplied with digital (automatic) feed controller for maximum feeding.

This type of conveyor is used for conveying mineral crushed lumps, herbs, spices, granules, etc. Singhasini offer troughed Belt conveyor having capacity 1 to 50 Tons per hour.

This type of conveyor is used for conveying lumps at higher inclination. We also offer inclined and portable belt conveyors. This is comparatively a slow speed conveyor.

SINGHASINIAir Lock Dampers are used at the bottom of Bins , Silos or Feed Hoppers to discharge materials , which cannot pass through Rotary Air Lock Feeders / Valves , at a controlled rate . Airlock. They are also used to introduce materials into positive or negative conveying systems . Air Lock Damper consists of two damper plates which are actuated at a given phase through a spring loaded cam arrangement , which turns at a given RPM thus maintaining a uniform rate of material flow and provides an air seal . Material of construction isM.S. / SS316 / SS304 or any other as per the nature of product.