Heliobond is a light-curing single-component bonding agent to optimize enamel etching with all light-curing restorative materials.

Indications:

• Adhesive for enamel bonding
• Together with Syntac also dentin bonding agent
• Cementation of tooth jewellery
• Transparent sealing of fissures and restorations
• As a bonding layer for the reapair of composite, crown and bridge restorations

Advantages:

• For optimum marginal seal between tooth and composite. Applied in conjunction with the enamel etch technique
• Storage at room temperature

Calcium hydroxide root canal sealer for the permanent obturation of root canals.

Indications: Permanent obturation of root canals in conjunction with all obturation techniques involving gutta-percha

Advantages:

• Excellent tissue tolerance
• Durable sealing of the root canal due to the slight setting expansion
• Its easy flowing composition allows the material to adapt well even to morphologically complicated canals
• Convenient application (automix syringe and Intra Canal Tip enable easy direct application)
• Long working time (mixed Apexit Plus can be used over 3 hours at room temperature)

OptraSculpt® Pad is a contouring instrument with special foam pad attachments, which is designed for the efficient, non-stick shaping of composite fillings. The highly flexible synthetic foam optimally adjusts to the tooth shape and allows the filling to be smoothly contoured, without leaving any unwanted marks on the composite material.
Reference scale on the instrument handle: The continuous vertical lines show ideal average widths, the dotted vertical lines average axial inclinations of the maxillary anterior teeth.

Indication: Suitable for adapting, shaping and contouring uncured sculptable composite materials. It is also available for lab composites.

Advantages:

• Anti-stick effect: reduced adhesion of the composite to the instrument
• Professional esthetics due to homogeneous surface design and reference scales on the instrument handle
• Reduced effort required for finishing and polishing

Tetric® N-Bond Universal is a single-component, light-curing adhesive for direct and indirect bonding procedures that features compatibility with all etching techniques: self-etch, selective-enamel-etch and total etch.
Tetric N-Bond Universal showed high bond strength on wet or overdried dentin.
Tetric N-Bond Unive rsal is the universal bonding agent available in the traditional bottle as well as the unique VivaPen® delivery for fast and convenient direct intra-oral application with minimal waste to optimize cost-effectiveness.

Indications:

• Direct-placed light-curing composite and compomer restorations.
• Core build-ups with light-, self- and dual-curing composites.
• Adhesive cementation of indirect restorations with light- and dualcuring
• luting composites with light-activation or in the self-curingmode.
• Intraoral repair of fractured composite and compomer restorations.
• Desensitization of hypersensitive cervical areas.
• Sealing of prepared tooth surfaces before temporary / permanent
• cementation of indirect restorations (e.g. Dual-Bonding Technique).

Advantages:

• Universal application For direct and indirect bonding procedures and compatibility with all etching techniques
• Predictable results High bond strength on wet or over-dried dentin
• Universal delivery Available in bottles and the convenient VivaPen

IPS Empress® Direct Opaque is a light-curing opaquing material suitable for masking exposed metal surface and discoloured tooth structure.

Indications: Masking of

• Exposed metal surfaces when repairing damaged ceramic or composite veneers intraorally
• Discoloured tooth structure

Advantages:

• High masking capability even when applied in thin layers
• Universal opaque shade, no shade matching required

Virtual is the new line of vinylpolysiloxane impression materials specifically developed to meet the requirements of today‘s most popular impression taking techniques.
The system features the five viscosities Putty, Heavy Body, Monophase, Light Body and Extra Light Body in both "fast" (2:30 min.) and "regular" (4:30 min.) setting times. The system is complemented by a full line of accessories, including a tray adhesive.

Indications:

• Final impressions used for the fabrication of indirect restorations (crowns, bridges, inlays, onlays and veneers)
• Dental implant impressions
• Matrix for "wax-ups" and treatment planning, study models
• Edentulous impressions
• Matrix used to create temporary restorations

Advantages:

• Excellent adaptation to the moist oral hard and soft tissues
• Excellent moisture displacement
• Exceptional readability and precision
• Flexible working times and fast setting phase
• Fresh peppermint scent
• Outstanding balance of physical properties

OptraSculpt “Next Generation” is a contouring instrument for the efficient contouring of composite restorations in the posterior region.
The attachments consisting of two components have been designed in a special procedure and facilitate the contouring of smooth and highly esthetic restoration surfaces. The attachments especially designed for the posterior region also facilitate the life-like recreation of anatomical tooth structures such as cusp slopes, fissures and proximal marginal ridges. The newly designed ring attachment holder of the OptraSculpt Pad instrument allows flexible usage of the attachments in the anterior region and everywhere desired.

Indications : Adaption, contouring and shaping of uncured, sculptable composite and compomer materials in class I, II, III, IV and V restorations. Also suitable for laboratory composites.

Advantages

• Efficient contouring of composites due to reduced adhesion of the composite material to the instrument
• Creation of homogeneous restoration surfaces
• Precise contouring of anatomical tooth structures with the 3 attachment shapes
• Optimized working angle: for better access to the cavities

Tetric® N-Flow Bulk Fill is a flowable 4-mm bulk-fill compositefor direct restorative procedures in the posterior region.

Indications:

• As initial layer / first increment in Class I and II composite restorations in permanent teeth
• Restorations in deciduous teeth (without capping layer)
• Tetric N-Flow Bulk Fill is capped with a layer of e.g. Tetric N-Ceram
• Bulk Fill or Tetric N-Ceram.

Advantages:

• Time-saving due to 4 mm bulk-filling and Highly reactive light initiator Ivocerin*
• More esthetic than other bulk-fill composites.Particularly in cases of discoloured tooth structure due to Aessenciotechnology it has Dentin-like translucency (≤ 10%).

Tetric N-Flow is a flowable, light-curing, radiopaque nanohybrid composite for restorative treatment and the cementation of translucent ceramic composite restorations. Available in syringes and cavifils.

Indications:

• As initial layer under class I and II restorations
• Anterior restorations (Classes III, IV)
• Class V restorations (cervical caries, root erosion, wedge-shaped defects)
• Small restorations of all types
• Extended fissure sealing
• Splinting of mobile teeth
• Blocking out of undercuts
• Adhesive cementation of translucent ceramic and composite restorations

Advantages:

• Nano-optimized technology encompassing nano-fillers and nanocolour pigments
• Excellent radiopacity
• Short curing time of only 10s (at a light intensity of 1.000 mW/cm2)

Shades:

• Enamel shades: A1, A2, A3, A3.5, A4, B2
• Dentin shades: A3.5
• Highly translucent Incisal shade: T
• Bleach shades: Bleach Light (L), Bleach Incisal (I)

Tetric N-Ceram® Bulk Fill is the efficient, radiopaque 4-mm composite for direct restorative procedures in the posterior region.

Indications:

• Restoration of deciduous teeth
• Restorations in the posterior region (Classes I and II)
• Class-V restorations (cervical caries, root erosions, wedge-shaped defects)
• Extended fissure sealing in molars and premolars
• Reconstructive build-ups

Advantages:

• Can be placed in increments of up to 4 mm due to Ivocerin®, the patented light initiator
• Low shrinkage and shrinkage stress due to the shrinkage stress reliever
• Short curing time of only 10s (at a light intensity of ≥ 1.000 mW/cm2)
• Esthetic 4-mm fillings due to the enamel-like translucency of 15%
• Smooth consistency, which ensures easy adaptation to the cavitywalls

Te-Econom Plus is a light-curing, radiopaque composite for restorative treatment. Available in syringes.

Advantages:

• Good physical properities
• Good polishability
• High radiopacity
• Long working time
• Proven Ivoclar Vivadent technology and quality

Protective varnish containing fluoride for desensitization and caries prophylaxis. Comprehensive clinical documentation. Advanced protection against sensitivity, caries and erosive wear due to:

• Closing of open dentin tubules
• Prevention of demineralization
• Stimulation of remineralization
• Remineralization of incipient caries

Advantages:

• 0.1% in a homogeneous solution; concentration is 10x higher after the varnish has dried
• Optimum esthetics
• Excellent adhesion
• Suitable for all age groups

Phosphoric acid gel (37%) for enamel etching and dentin conditioning.

Indications: N-Etch is used in the total-etch-technique in conjunction withadhesives, composites, luting materials and fissure sealants.

Advantages:

• Optimal partner for Tetric® N-Bond
• Good etching effect on enamel and dentin
• Broad indication spectrum

Self-curing composite material in paste form for the fabrication of temporary restorations.

Indications: Fabrication of temporary restorations

• Crowns and bridges
• Inlays and onlays
• Veneers
• Post-retained temporary crowns

Advantages:

• High fracture strength and optimum wear period
• Accuracy of fit and tension-free results
• Protection of the dental pulp and tissues
• Easy handling due to automix double-barrel cartridge

Light-curing, nano hybrid composite for the direct highly esthetic restorative procedures.

Indications:

• Anterior restorations (Class III and IV)
• Posterior restorations (Class I, II)
• Cervical restorations (Class V, e.g. cervical caries, root erosion, wedge-shaped defects)
• Adjustment of tooth position and shape (e.g. diastema closure, closure of interdental “black triangles”, lengthening of the incisal edge)
• Direct veneers

Advantages:

• Wide range of indications for anterior and posterior teeth
• Wide range of shades in various degrees of translucency
• Not bound to one given layering technique
• Good polishing properties and high surface luster
• Lifelike fluorescence
• Low sensitivity to light
• Outstanding radiopacity
• Compatible with Tetric EvoFlow and IPS Empress Direct Color
• The shade guide of the system is autoclavable and made of ceramic: the shade guide retains its precision over many years as the shade samples do not fade if they are exposed to light

Shades:

• Dentin shades: A1, A2, A3, A3, 5, A4, IVA5, IVA6, B1, B2, C3, D2, Bleach L, Bleach XL
• Enamel shades: A1, A2, A3, A3, 5, A4, B1, B2, B3, B4, C1, C2, C3, D2, D3, Bleach L,
• Bleach XL Transluscent: Trans 20, Trans 30, Trans Opal

Water-soluble, glycerine-based try-in paste for lab-fabricated ceramic and composite restorations. Available in the four Variolink N shades.

Indications:

• Simulating the shades of Variolink N luting composite
• Protecting the etching pattern of lab-fabricated all-ceramic restorations

Delivery forms- Refill -1 x 1.5 ml

• Transparent
• Yellow
• White
• Bleach XL
• Clear
• +1
• +2

Self-adhesive, self-curing resin cement with light-curing option that simplifies and speeds up cementation procedures. It eliminates the need for conditioning with phosphoric acid and bonding.

Indications:Self-adhesive cementation of indirect restorations made of the following materials:

• Metal and metal ceramics
• High-strength all-ceramics (zirconium oxide, lithium disilicate andaluminium oxide ceramics)
• Fibre-reinforced composites

Advantages:

• No phosphoric acid etching
• No primer, bonding agents or adhesives for enamel and dentin
• Fast and easy handling due to automix delivery
• Excellent physical properties
• Good bonding values
• Easy removal of excess material

Dual-curing, translucent, temporary composite cement for the esthetic and provisional cementation of temporary restorations.

Indications: Temporary cementation of provisionals

• Crowns and bridges
• Inlays and onlays
• Veneers

Advantages:

• Eugenol-free
• Dual-curing
• High esthetics due to two translucent shades
• Ideal retention behaviour
• Easy handling due to automix double-push syringe

Glycerine gel to prevent the oxygen-inhibited layer of composites with composite or ceramic restorations.

Indications:

• Try-in paste
• Preventing an inhibited layer with composites
• Protecting the etching pattern of lab-fabricated all-ceramic restorations

High performance, multiple-use diamond polishing system for CAD/ CAM and lab-fabricated ceramic materials.

Advantages:

• Especially designed for ceramic materials
• Particularly smooth restoration surfaces
• High wear resistance
• Autoclavable and reusable

ApexCal is the new, creamy calcium hydroxide paste suitable for use as a temporary disinfectant dressing during endodontic treatment.

Indications: Applied as a drug filler during root canal treatment and used for indirect and direct pulp capping

Advantages:

• Time-saving direct application
• Easy removal, as the material does not set when in place
• High radiopacity (400% Al)

Efficient and advanced one-step polishing system with a high concentration of diamond particles. A high-gloss finish and smooth surfaces are achieved in only one working step. OptraPol® polishers can be autoclaved and re-used.

Indication: OptraPol provides efficient high-gloss polishing results in just one step. It is indicated for the high gloss polishing of direct and indirect restorations made of all popular types of composite material as well as for amalgam restorations.

Advantages:

• One-step polishing system
• Radiant high-gloss restoration surfaces in only one step
• High wear resistance
• Autoclavable and reusable

IPS Classic is a well-proven metal-ceramic system that allows for individuality and creativity. Controlled distribution of particles permits excellent build-up and maintenance of shape of the ceramic material even after several firing cycles. The classic ceramic material from Ivoclar Vivadent is available in both Chromascop and A—D shades.

The first metal-ceramic containing patented oxyapatite.

Detail :

• Make it fast. IPS Style’s low shrinkage saves you time.
• Make it easy. The material’s ease of use ensures reliable results.
• Make it natural. The patented oxyapatite controls the translucency and depth effect.

IPS e.max® Ceram Selection kit comprises twelve Enamel and Effect materials that are especially designed to give professionals more room for creativity and individuality in the layering technique. The materials are used in combination with the existing IPS e.max Ceram materials .The renowned dental technicians Oliver Brix (Germany), August Bruguera (Spain) and Gérald Ubassy (France) have substantially shaped the concept on which IPS e.max Ceram Selection is based. The specially shaded materials and their application are the result of many years of successful work with IPS e.max Ceram.

Tetric N-Bond is a light-curing, nano-optimized single-component bonding agent for enamel and dentin bonding in combination with the total-etch technique.

Indications:

• Adhesive for direct, light-curing and dual-curing composite and compomer restorations
• Adhesive for indirect all-ceramic and composite restorations (inlays, onlays, veneers)

Advantages:

• Integrated nano-fillers for homogeneous layer formation and penetration into dentinal tubules, which leads to improved adhesion to the tooth structure and fewer postoperative sensitivities
• Ethanol-based for easy application in one layer and improved stability because there is no premature evaporation as with acetone based adhesives
• Consistently high bond strength for clinical success
• Technique tolerant Good wetting of dry & moist surfaces
• Storage at room temperature

FRC Postec Plus is a highly esthetic and highly radiopaque root canal post composed of glass fibre-reinforced composite. The post is suitable for the chairside reconstruction of endodontically treated teeth that show extensive coronal damage. The FRC Postec Plus system consists of light-transmitting glass fibrereinforced composite posts in three sizes and includes purposedesigned stainless steel reamers for the preparation of the recipient site of the post space.

Indications: Restoration of endodontically treated anterior and posterior teeth that demonstrate severe coronal damage

Advantages:

• Lifelike appearance
• Superior radiopacity
• High retention
• Gentle on roots
• Clearly arranged system using tried-and-tested products
• Easy to remove
• Clinically proven concept

Cention N is a self-curing powder-liquid filling material for the complete and permanent replacement of tooth structure in posterior teeth. It belongs to the materials group ofAlkasites.

Indications:

• Permanent fillings in class I and II cavities
• Fillings for retentively prepared class I and II cavities, without
• an adhesive
• Permanent fillings in class V cavities in combination with
• an adhesive
• Fillings in deciduous teeth

Advantages:

• Stronger than glass ionomer cement due to High Flexural Strength
• Due to its tooth-coloured esthetics and translucency, it is more esthetic than amalgam and glass ionomer cement.
• Time saving application protocol helps replacing the tooth structure in only 4 steps
• Alkaline filler contained in the material releases calcium, fluoride and hydroxide ions. This helps to prevent demineralization and promote remineralization

Light-curing, resin-based fissure sealants for the preventive sealing of pits and fissures, using the enamel etching technique. The new, ergonomically shaped syringe fits snugly in the palm of the hand and therefore allows the sealants to be dosed and applied more accurately than previous versions of the products.
Helioseal F - White-shaded sealant with additional fluoride release

Advantages:

• Precise application, the basis for top quality sealing results
• Well-proven in many years of clinical use
• Effective protection against caries

Virtual CADbite registration material is scannable and can be used for the optical recording of data when fabricating restorations with CAD/ CAM systems such as CEREC. Virtual CADbite is an addition silicone, which may also be used for „conventional“ bite registration techniques in conjunction with indirect restorative procedures. The material demonstrates a non-slump consistency, short setting time and good dimensional stability. Moreover, it provides excellent reproduction of detail and achieves a final hardness of 32 Shore D.

Advantages :

• Fast - As the material requires an intra-oral set time of only 45 seconds, the risk of distortions and inaccuracies due to patient jaw movements are substantially reduced. At the same time, Virtual CADbite provides sufficient working time to allow full-arch bite registrations to be taken.
• Strong - Due to the material’s high final hardness of 32 Shore-D and high fracture toughness, Virtual CADbite registrations are easy to trim and grind. Moreover, undesirable shifts are prevented when adjusting the position of the casts in the articulator.
• Scannable - In response to the needs of CAD/CAM users across the globe, Virtual CADbite has been given a reflective surface. It delivers excellent results when capturing images with intra-oral scanning devices.

Dual-curing (light- and self-curing) luting composite.

Indications: Adhesive cementation of ceramic, Ceromer/FRC and composite restorations (inlays, onlays, crowns, veneers, metal-free bridges)

Advantages:

• Available in 4 shades and two degrees of viscosity
• High radiopacity
• Highly esthetic results

Shades:

• Transparent, Yellow, White, Bleach XL
• Catalyst is available in two shades (Transparent, Yellow) and two viscosities (low, high viscosity)

Delivery Forms

• Professional Set
  • Base: transparent, yellow, white, Bleach XL
  • Catalyst: transparent/low viscosity, transparent/high viscosity
  • Catalyst: yellow/low viscosity, yellow/high viscosity, Heliobond, Syntac Adhesive, Syntac Primer, Monobond N, N-Etch, Liquid Strip, various accessories

• Esthetic Cementation System
  • Base: transparent, yellow, white, Bleach XL
  • Catalyst: transparent/low viscosity, transparent/high viscosity
  • Catalyst: yellow/low viscosity, yellow/high viscosity, ExciTE F DSC, Monobond N, N-Etch, Liquid Strip, various accessories

• Intro Pack : Base transparent, Catalyst transparent/low viscosity, Monobond N, Liquid Strip, various accessories
• Bonding System : Heliobond, Syntac Adhesive, Syntac Primer, N-Etch, various accessories

• Variolink N Base Refill -1 x 1.5 ml
  • Transparent    
  • Yellow    
  • White    
  • Bleach XL    

• Variolink N Catalyst Refill -1x 1.5 ml
  • Transparent/low viscosity    
  • Transparent/high viscosity    
  • Yellow/low viscosity    
  • Yellow/high viscosity    

The IPS Ceramic Etching Gel is used for the creation of retentive bonding surfaces on all-ceramic restorations to prepare for cementation.
It enhances the bonding effect between the composite cement and the ceramic bonding surface.

Strengthens teeth with calcium plus phosphate plus fluoride. Fluor Protector Gel offers teeth intensive and at the same time gentle care.

Recommended applications:

• Special dental care to protect against caries, erosive wear and periodontal disease
• Sensitive teeth
• Exposed tooth necks
• Patients with acidic diets
• Patients with dry mouth
• During orthodontic treatment
• After professional tooth cleaning
• During tooth whitening

Advantages:

• Calcium + 1450ppm fluoride + phosphate protect the teeth fromacid attacks.
• Xylitol inhibits the growth of cariogenic bacteria.
• D-panthenol is soothing to the gums.

The Proxyt prophy pastes with defined abrasive values (RDA) ensure professional, needs-oriented cleaning and polishing of teeth, restorations and implant-supported reconstructions, due to their advanced formula. The pastes contain xylitol, which inhibits the growth of the bacteria that cause caries.

Containing fluoride

• Proxyt RDA 83, coarse
• Proxyt RDA 36, medium
• Proxyt RDA 7, fine
• Fluoride-free
• Proxyt RDA 36, medium

Advantages:

• Customized, gentle cleaning and polishing
• Scratch-free cleaning of sensitive surfaces using the fine Proxyt
• without pumice
• Smooth consistency, splatter-free formula
• Fresh peppermint taste

Light-curing luting composite for the high-esthetic cementation.

Indications: Adhesive cementation of translucent all-ceramic restorations with a thickness of < 2.0mm (veneers, inlays, onlays)

Advantages: High shade stability due to a specific amine-reduced formulationLow wear, good polishing properties

Shades:

• Clear: Neutral effect (50% translucency)
• +1: Little brightening (24% translucency)
• +2: Brightening, whitening effect (12% translucency)

Light-curing, resin-based fissure sealants for the preventive sealing of pits and fissures, using the enamel etching technique. The new, ergonomically shaped syringe fits snugly in the palm of the hand and therefore allows the sealants to be dosed and applied more accurately than previous versions of the products.
Helioseal Clear- Transparent sealant for excellent esthetic results and easy monitoring of fissures in case of doubt

Advantages:

• Precise application, the basis for top quality sealing results
• Well-proven in many years of clinical use
• Effective protection against caries

Light-curing, highly transparent single-component luting material for brackets.

Advantages:

• No dosing, no mixing
• Brackets can be placed on the tooth surfaces without time pressure due to the light-curing properties of the material

For true-to-nature characterization.

Indications: Individual characterization of direct and lab-fabricated composite restorations -

• Masking of discoloured tooth structure
• Characterization of CAD/CAM veneers fabricated chairside

Advantages:

• True-to-nature characterization of high-end composite and CAD/ CAM-fabricated restorations
• User-friendly direct application without dilution
• High masking capability even when applied in thin layers
• Smooth consistency
• 0.4-mm tips for precise application
• The ideal complement to IPS Empress® Direct and IPS EmpressCAD

The two consistencies Heavy Body and Monophase are now offered as Virtual 380 in new, large cartridges. These XXL cartridges are suitable for use in e.g. Pentamix, Plug & Press Dispenser and MixStar mixing units.

Advantages:

•  Ready-to-use, large cartridge - convenient handling
• Separate activation as in the case of foil bags is not required
• Economical package size - contents 380ml

Multiple-use, 2-step polishing system for composites and amalgam.

Indication: Politip® is indicated for the polishing of restorations made of composite material and amalgam.

OptraStick is a flexible placement instrument which features a ballshaped, flexible adhesive tip. The tip allows small objects, inlays, onlays and veneers (e.g. made of a IPS Empress®, IPS e.max®) to be picked up, held, carried and placed quickly and easily.

Advantages:

• Easy pick-up
• Strong adherence
• Secure positioning

Desensitizing varnish for hypersensitive teeth.

Indications:

• Hypersensitive cervicals
• Hypersensitivities due to bleaching
• Desensitization after professional tooth cleaning, scaling and rootplaning
• Dentin protection under restorative materials

Advantages:

• Long-term relief
• Quick to work
• Quick to use
• Gentle to gums
• Free Stand Single Dose - free-standing with grip surface

Self-curing glass ionomer cement with high translucency.

Indications: Cementation of full-cast crowns or veneers, high-strength allceramic materials and orthodontic bands.

Advantages:

• High translucency
• 1:1 mixing ratio
• Radiopacity
• Strong bond to dentin
• Optimum wetting of powder and liquid
• Easy removal of excess material

Crystal glass ornaments that are bonded to the labial surfaces of natural upper anterior teeth without previous preparation.

Self-curing composite core build-up material with light curing option. Two consistencies, two techniques, two curing methods and four shades provide an optimum foundation for the reconstruction of vital and non-vital teeth with part or most of the clinical crown missing.

Advantages:

• Based on Ivoclar Vivadent‘s long-term experience in the field ofcomposite technology
• A suitable option for every case: Self- or light-curing
• Four different shades
• Coordinated system with the self-etching AdheSE

Indication: Astropol® is indicated for the pre-polishing and polishing of restorations made of composite material and amalgam.

Astropol/24 :

• Astropol F - Polishing tips (grey) for the removal of excess composite material from proximal and occlusal surfaces
• Astropol P - Polishing tips (green) for polishing composite materials
• Astropol HP - Polishing tips (pink) for final high-gloss

 Te-Econom Bond is a single-component bonding agent for enamel and dentin bonding in conjunction with the total-etch technique.

Indication: Direct light-curing restorations

Advantages:

• One-bottle, one-layer adhesive
• High bond strengths
• Minimal evaporation of solvent (alcohol)
• Storage at room temperature

Fluorescent disclosing liquid to expose plaque by means of a polymerization light.

Advantages:

• No inconvenient staining of tongue and mucous membranes
• Easy handling
• Fluorescent under any polymerization light

Light-curing, resin-based fissure sealants for the preventive sealing of pits and fissures, using the enamel etching technique. The new, ergonomically shaped syringe fits snugly in the palm of the hand and therefore allows the sealants to be dosed and applied more accurately than previous versions of the products.
Helioseal - White-shaded sealant that permits easy control during application and at recalls

Advantages:

• Precise application, the basis for top quality sealing results
• Well-proven in many years of clinical use
• Effective protection against caries

Systemp.desensitizer is suitable for the prevention and reduction of dentin hypersensitivity and post-operative pain.

Indications:

• Temporary restorations (e.g. with Systemp.inlay, Systemp.onlay, Systemp.c&b II)
• Conventional cementation of indirect restorations
• Direct restorations (e.g. amalgam, glass ionomer cement)

Advantages:

• Needs to be brushed into dentin surfaces for only 10 seconds; no light-curing required
• The use of Systemp.desensitizer will not affect the retention of temporary restoratives, cements or filling materials
• Has a cleaning effect on the lesion

Heliobond is a light-curing single-component bonding agent to optimize enamel etching with all light-curing restorative materials.

Indications:

• Adhesive for enamel bonding
• Together with Syntac also dentin bonding agent
• Cementation of tooth jewellery
• Transparent sealing of fissures and restorations
• As a bonding layer for the reapair of composite, crown and bridge restorations

Advantages:

• For optimum marginal seal between tooth and composite. Applied in conjunction with the enamel etch technique
• Storage at room temperature

Calcium hydroxide root canal sealer for the permanent obturation of root canals.

Indications: Permanent obturation of root canals in conjunction with all obturation techniques involving gutta-percha

Advantages:

• Excellent tissue tolerance
• Durable sealing of the root canal due to the slight setting expansion
• Its easy flowing composition allows the material to adapt well even to morphologically complicated canals
• Convenient application (automix syringe and Intra Canal Tip enable easy direct application)
• Long working time (mixed Apexit Plus can be used over 3 hours at room temperature)

OptraSculpt® Pad is a contouring instrument with special foam pad attachments, which is designed for the efficient, non-stick shaping of composite fillings. The highly flexible synthetic foam optimally adjusts to the tooth shape and allows the filling to be smoothly contoured, without leaving any unwanted marks on the composite material.
Reference scale on the instrument handle: The continuous vertical lines show ideal average widths, the dotted vertical lines average axial inclinations of the maxillary anterior teeth.

Indication: Suitable for adapting, shaping and contouring uncured sculptable composite materials. It is also available for lab composites.

Advantages:

• Anti-stick effect: reduced adhesion of the composite to the instrument
• Professional esthetics due to homogeneous surface design and reference scales on the instrument handle
• Reduced effort required for finishing and polishing

Tetric® N-Bond Universal is a single-component, light-curing adhesive for direct and indirect bonding procedures that features compatibility with all etching techniques: self-etch, selective-enamel-etch and total etch.
Tetric N-Bond Universal showed high bond strength on wet or overdried dentin.
Tetric N-Bond Unive rsal is the universal bonding agent available in the traditional bottle as well as the unique VivaPen® delivery for fast and convenient direct intra-oral application with minimal waste to optimize cost-effectiveness.

Indications:

• Direct-placed light-curing composite and compomer restorations.
• Core build-ups with light-, self- and dual-curing composites.
• Adhesive cementation of indirect restorations with light- and dualcuring
• luting composites with light-activation or in the self-curingmode.
• Intraoral repair of fractured composite and compomer restorations.
• Desensitization of hypersensitive cervical areas.
• Sealing of prepared tooth surfaces before temporary / permanent
• cementation of indirect restorations (e.g. Dual-Bonding Technique).

Advantages:

• Universal application For direct and indirect bonding procedures and compatibility with all etching techniques
• Predictable results High bond strength on wet or over-dried dentin
• Universal delivery Available in bottles and the convenient VivaPen

IPS Empress® Direct Opaque is a light-curing opaquing material suitable for masking exposed metal surface and discoloured tooth structure.

Indications: Masking of

• Exposed metal surfaces when repairing damaged ceramic or composite veneers intraorally
• Discoloured tooth structure

Advantages:

• High masking capability even when applied in thin layers
• Universal opaque shade, no shade matching required

Virtual is the new line of vinylpolysiloxane impression materials specifically developed to meet the requirements of today‘s most popular impression taking techniques.
The system features the five viscosities Putty, Heavy Body, Monophase, Light Body and Extra Light Body in both "fast" (2:30 min.) and "regular" (4:30 min.) setting times. The system is complemented by a full line of accessories, including a tray adhesive.

Indications:

• Final impressions used for the fabrication of indirect restorations (crowns, bridges, inlays, onlays and veneers)
• Dental implant impressions
• Matrix for "wax-ups" and treatment planning, study models
• Edentulous impressions
• Matrix used to create temporary restorations

Advantages:

• Excellent adaptation to the moist oral hard and soft tissues
• Excellent moisture displacement
• Exceptional readability and precision
• Flexible working times and fast setting phase
• Fresh peppermint scent
• Outstanding balance of physical properties

OptraSculpt “Next Generation” is a contouring instrument for the efficient contouring of composite restorations in the posterior region.
The attachments consisting of two components have been designed in a special procedure and facilitate the contouring of smooth and highly esthetic restoration surfaces. The attachments especially designed for the posterior region also facilitate the life-like recreation of anatomical tooth structures such as cusp slopes, fissures and proximal marginal ridges. The newly designed ring attachment holder of the OptraSculpt Pad instrument allows flexible usage of the attachments in the anterior region and everywhere desired.

Indications : Adaption, contouring and shaping of uncured, sculptable composite and compomer materials in class I, II, III, IV and V restorations. Also suitable for laboratory composites.

Advantages

• Efficient contouring of composites due to reduced adhesion of the composite material to the instrument
• Creation of homogeneous restoration surfaces
• Precise contouring of anatomical tooth structures with the 3 attachment shapes
• Optimized working angle: for better access to the cavities

Tetric® N-Flow Bulk Fill is a flowable 4-mm bulk-fill compositefor direct restorative procedures in the posterior region.

Indications:

• As initial layer / first increment in Class I and II composite restorations in permanent teeth
• Restorations in deciduous teeth (without capping layer)
• Tetric N-Flow Bulk Fill is capped with a layer of e.g. Tetric N-Ceram
• Bulk Fill or Tetric N-Ceram.

Advantages:

• Time-saving due to 4 mm bulk-filling and Highly reactive light initiator Ivocerin*
• More esthetic than other bulk-fill composites.Particularly in cases of discoloured tooth structure due to Aessenciotechnology it has Dentin-like translucency (≤ 10%).

Tetric N-Flow is a flowable, light-curing, radiopaque nanohybrid composite for restorative treatment and the cementation of translucent ceramic composite restorations. Available in syringes and cavifils.

Indications:

• As initial layer under class I and II restorations
• Anterior restorations (Classes III, IV)
• Class V restorations (cervical caries, root erosion, wedge-shaped defects)
• Small restorations of all types
• Extended fissure sealing
• Splinting of mobile teeth
• Blocking out of undercuts
• Adhesive cementation of translucent ceramic and composite restorations

Advantages:

• Nano-optimized technology encompassing nano-fillers and nanocolour pigments
• Excellent radiopacity
• Short curing time of only 10s (at a light intensity of 1.000 mW/cm2)

Shades:

• Enamel shades: A1, A2, A3, A3.5, A4, B2
• Dentin shades: A3.5
• Highly translucent Incisal shade: T
• Bleach shades: Bleach Light (L), Bleach Incisal (I)

Tetric N-Ceram® Bulk Fill is the efficient, radiopaque 4-mm composite for direct restorative procedures in the posterior region.

Indications:

• Restoration of deciduous teeth
• Restorations in the posterior region (Classes I and II)
• Class-V restorations (cervical caries, root erosions, wedge-shaped defects)
• Extended fissure sealing in molars and premolars
• Reconstructive build-ups

Advantages:

• Can be placed in increments of up to 4 mm due to Ivocerin®, the patented light initiator
• Low shrinkage and shrinkage stress due to the shrinkage stress reliever
• Short curing time of only 10s (at a light intensity of ≥ 1.000 mW/cm2)
• Esthetic 4-mm fillings due to the enamel-like translucency of 15%
• Smooth consistency, which ensures easy adaptation to the cavitywalls

Te-Econom Plus is a light-curing, radiopaque composite for restorative treatment. Available in syringes.

Advantages:

• Good physical properities
• Good polishability
• High radiopacity
• Long working time
• Proven Ivoclar Vivadent technology and quality

Protective varnish containing fluoride for desensitization and caries prophylaxis. Comprehensive clinical documentation. Advanced protection against sensitivity, caries and erosive wear due to:

• Closing of open dentin tubules
• Prevention of demineralization
• Stimulation of remineralization
• Remineralization of incipient caries

Advantages:

• 0.1% in a homogeneous solution; concentration is 10x higher after the varnish has dried
• Optimum esthetics
• Excellent adhesion
• Suitable for all age groups

Phosphoric acid gel (37%) for enamel etching and dentin conditioning.

Indications: N-Etch is used in the total-etch-technique in conjunction withadhesives, composites, luting materials and fissure sealants.

Advantages:

• Optimal partner for Tetric® N-Bond
• Good etching effect on enamel and dentin
• Broad indication spectrum

Self-curing composite material in paste form for the fabrication of temporary restorations.

Indications: Fabrication of temporary restorations

• Crowns and bridges
• Inlays and onlays
• Veneers
• Post-retained temporary crowns

Advantages:

• High fracture strength and optimum wear period
• Accuracy of fit and tension-free results
• Protection of the dental pulp and tissues
• Easy handling due to automix double-barrel cartridge

Light-curing, nano hybrid composite for the direct highly esthetic restorative procedures.

Indications:

• Anterior restorations (Class III and IV)
• Posterior restorations (Class I, II)
• Cervical restorations (Class V, e.g. cervical caries, root erosion, wedge-shaped defects)
• Adjustment of tooth position and shape (e.g. diastema closure, closure of interdental “black triangles”, lengthening of the incisal edge)
• Direct veneers

Advantages:

• Wide range of indications for anterior and posterior teeth
• Wide range of shades in various degrees of translucency
• Not bound to one given layering technique
• Good polishing properties and high surface luster
• Lifelike fluorescence
• Low sensitivity to light
• Outstanding radiopacity
• Compatible with Tetric EvoFlow and IPS Empress Direct Color
• The shade guide of the system is autoclavable and made of ceramic: the shade guide retains its precision over many years as the shade samples do not fade if they are exposed to light

Shades:

• Dentin shades: A1, A2, A3, A3, 5, A4, IVA5, IVA6, B1, B2, C3, D2, Bleach L, Bleach XL
• Enamel shades: A1, A2, A3, A3, 5, A4, B1, B2, B3, B4, C1, C2, C3, D2, D3, Bleach L,
• Bleach XL Transluscent: Trans 20, Trans 30, Trans Opal

Water-soluble, glycerine-based try-in paste for lab-fabricated ceramic and composite restorations. Available in the four Variolink N shades.

Indications:

• Simulating the shades of Variolink N luting composite
• Protecting the etching pattern of lab-fabricated all-ceramic restorations

Delivery forms- Refill -1 x 1.5 ml

• Transparent
• Yellow
• White
• Bleach XL
• Clear
• +1
• +2

Self-adhesive, self-curing resin cement with light-curing option that simplifies and speeds up cementation procedures. It eliminates the need for conditioning with phosphoric acid and bonding.

Indications:Self-adhesive cementation of indirect restorations made of the following materials:

• Metal and metal ceramics
• High-strength all-ceramics (zirconium oxide, lithium disilicate andaluminium oxide ceramics)
• Fibre-reinforced composites

Advantages:

• No phosphoric acid etching
• No primer, bonding agents or adhesives for enamel and dentin
• Fast and easy handling due to automix delivery
• Excellent physical properties
• Good bonding values
• Easy removal of excess material

Dual-curing, translucent, temporary composite cement for the esthetic and provisional cementation of temporary restorations.

Indications: Temporary cementation of provisionals

• Crowns and bridges
• Inlays and onlays
• Veneers

Advantages:

• Eugenol-free
• Dual-curing
• High esthetics due to two translucent shades
• Ideal retention behaviour
• Easy handling due to automix double-push syringe

Glycerine gel to prevent the oxygen-inhibited layer of composites with composite or ceramic restorations.

Indications:

• Try-in paste
• Preventing an inhibited layer with composites
• Protecting the etching pattern of lab-fabricated all-ceramic restorations

High performance, multiple-use diamond polishing system for CAD/ CAM and lab-fabricated ceramic materials.

Advantages:

• Especially designed for ceramic materials
• Particularly smooth restoration surfaces
• High wear resistance
• Autoclavable and reusable

ApexCal is the new, creamy calcium hydroxide paste suitable for use as a temporary disinfectant dressing during endodontic treatment.

Indications: Applied as a drug filler during root canal treatment and used for indirect and direct pulp capping

Advantages:

• Time-saving direct application
• Easy removal, as the material does not set when in place
• High radiopacity (400% Al)

Efficient and advanced one-step polishing system with a high concentration of diamond particles. A high-gloss finish and smooth surfaces are achieved in only one working step. OptraPol® polishers can be autoclaved and re-used.

Indication: OptraPol provides efficient high-gloss polishing results in just one step. It is indicated for the high gloss polishing of direct and indirect restorations made of all popular types of composite material as well as for amalgam restorations.

Advantages:

• One-step polishing system
• Radiant high-gloss restoration surfaces in only one step
• High wear resistance
• Autoclavable and reusable

IPS Classic is a well-proven metal-ceramic system that allows for individuality and creativity. Controlled distribution of particles permits excellent build-up and maintenance of shape of the ceramic material even after several firing cycles. The classic ceramic material from Ivoclar Vivadent is available in both Chromascop and A—D shades.

The first metal-ceramic containing patented oxyapatite.

Detail :

• Make it fast. IPS Style’s low shrinkage saves you time.
• Make it easy. The material’s ease of use ensures reliable results.
• Make it natural. The patented oxyapatite controls the translucency and depth effect.

IPS e.max® Ceram Selection kit comprises twelve Enamel and Effect materials that are especially designed to give professionals more room for creativity and individuality in the layering technique. The materials are used in combination with the existing IPS e.max Ceram materials .The renowned dental technicians Oliver Brix (Germany), August Bruguera (Spain) and Gérald Ubassy (France) have substantially shaped the concept on which IPS e.max Ceram Selection is based. The specially shaded materials and their application are the result of many years of successful work with IPS e.max Ceram.

Tetric N-Bond is a light-curing, nano-optimized single-component bonding agent for enamel and dentin bonding in combination with the total-etch technique.

Indications:

• Adhesive for direct, light-curing and dual-curing composite and compomer restorations
• Adhesive for indirect all-ceramic and composite restorations (inlays, onlays, veneers)

Advantages:

• Integrated nano-fillers for homogeneous layer formation and penetration into dentinal tubules, which leads to improved adhesion to the tooth structure and fewer postoperative sensitivities
• Ethanol-based for easy application in one layer and improved stability because there is no premature evaporation as with acetone based adhesives
• Consistently high bond strength for clinical success
• Technique tolerant Good wetting of dry & moist surfaces
• Storage at room temperature

FRC Postec Plus is a highly esthetic and highly radiopaque root canal post composed of glass fibre-reinforced composite. The post is suitable for the chairside reconstruction of endodontically treated teeth that show extensive coronal damage. The FRC Postec Plus system consists of light-transmitting glass fibrereinforced composite posts in three sizes and includes purposedesigned stainless steel reamers for the preparation of the recipient site of the post space.

Indications: Restoration of endodontically treated anterior and posterior teeth that demonstrate severe coronal damage

Advantages:

• Lifelike appearance
• Superior radiopacity
• High retention
• Gentle on roots
• Clearly arranged system using tried-and-tested products
• Easy to remove
• Clinically proven concept

Cention N is a self-curing powder-liquid filling material for the complete and permanent replacement of tooth structure in posterior teeth. It belongs to the materials group ofAlkasites.

Indications:

• Permanent fillings in class I and II cavities
• Fillings for retentively prepared class I and II cavities, without
• an adhesive
• Permanent fillings in class V cavities in combination with
• an adhesive
• Fillings in deciduous teeth

Advantages:

• Stronger than glass ionomer cement due to High Flexural Strength
• Due to its tooth-coloured esthetics and translucency, it is more esthetic than amalgam and glass ionomer cement.
• Time saving application protocol helps replacing the tooth structure in only 4 steps
• Alkaline filler contained in the material releases calcium, fluoride and hydroxide ions. This helps to prevent demineralization and promote remineralization

Light-curing, resin-based fissure sealants for the preventive sealing of pits and fissures, using the enamel etching technique. The new, ergonomically shaped syringe fits snugly in the palm of the hand and therefore allows the sealants to be dosed and applied more accurately than previous versions of the products.
Helioseal F - White-shaded sealant with additional fluoride release

Advantages:

• Precise application, the basis for top quality sealing results
• Well-proven in many years of clinical use
• Effective protection against caries

Virtual CADbite registration material is scannable and can be used for the optical recording of data when fabricating restorations with CAD/ CAM systems such as CEREC. Virtual CADbite is an addition silicone, which may also be used for „conventional“ bite registration techniques in conjunction with indirect restorative procedures. The material demonstrates a non-slump consistency, short setting time and good dimensional stability. Moreover, it provides excellent reproduction of detail and achieves a final hardness of 32 Shore D.

Advantages :

• Fast - As the material requires an intra-oral set time of only 45 seconds, the risk of distortions and inaccuracies due to patient jaw movements are substantially reduced. At the same time, Virtual CADbite provides sufficient working time to allow full-arch bite registrations to be taken.
• Strong - Due to the material’s high final hardness of 32 Shore-D and high fracture toughness, Virtual CADbite registrations are easy to trim and grind. Moreover, undesirable shifts are prevented when adjusting the position of the casts in the articulator.
• Scannable - In response to the needs of CAD/CAM users across the globe, Virtual CADbite has been given a reflective surface. It delivers excellent results when capturing images with intra-oral scanning devices.

Dual-curing (light- and self-curing) luting composite.

Indications: Adhesive cementation of ceramic, Ceromer/FRC and composite restorations (inlays, onlays, crowns, veneers, metal-free bridges)

Advantages:

• Available in 4 shades and two degrees of viscosity
• High radiopacity
• Highly esthetic results

Shades:

• Transparent, Yellow, White, Bleach XL
• Catalyst is available in two shades (Transparent, Yellow) and two viscosities (low, high viscosity)

Delivery Forms

• Professional Set
  • Base: transparent, yellow, white, Bleach XL
  • Catalyst: transparent/low viscosity, transparent/high viscosity
  • Catalyst: yellow/low viscosity, yellow/high viscosity, Heliobond, Syntac Adhesive, Syntac Primer, Monobond N, N-Etch, Liquid Strip, various accessories

• Esthetic Cementation System
  • Base: transparent, yellow, white, Bleach XL
  • Catalyst: transparent/low viscosity, transparent/high viscosity
  • Catalyst: yellow/low viscosity, yellow/high viscosity, ExciTE F DSC, Monobond N, N-Etch, Liquid Strip, various accessories

• Intro Pack : Base transparent, Catalyst transparent/low viscosity, Monobond N, Liquid Strip, various accessories
• Bonding System : Heliobond, Syntac Adhesive, Syntac Primer, N-Etch, various accessories

• Variolink N Base Refill -1 x 1.5 ml
  • Transparent    
  • Yellow    
  • White    
  • Bleach XL    

• Variolink N Catalyst Refill -1x 1.5 ml
  • Transparent/low viscosity    
  • Transparent/high viscosity    
  • Yellow/low viscosity    
  • Yellow/high viscosity    

The IPS Ceramic Etching Gel is used for the creation of retentive bonding surfaces on all-ceramic restorations to prepare for cementation.
It enhances the bonding effect between the composite cement and the ceramic bonding surface.

Strengthens teeth with calcium plus phosphate plus fluoride. Fluor Protector Gel offers teeth intensive and at the same time gentle care.

Recommended applications:

• Special dental care to protect against caries, erosive wear and periodontal disease
• Sensitive teeth
• Exposed tooth necks
• Patients with acidic diets
• Patients with dry mouth
• During orthodontic treatment
• After professional tooth cleaning
• During tooth whitening

Advantages:

• Calcium + 1450ppm fluoride + phosphate protect the teeth fromacid attacks.
• Xylitol inhibits the growth of cariogenic bacteria.
• D-panthenol is soothing to the gums.

The Proxyt prophy pastes with defined abrasive values (RDA) ensure professional, needs-oriented cleaning and polishing of teeth, restorations and implant-supported reconstructions, due to their advanced formula. The pastes contain xylitol, which inhibits the growth of the bacteria that cause caries.

Containing fluoride

• Proxyt RDA 83, coarse
• Proxyt RDA 36, medium
• Proxyt RDA 7, fine
• Fluoride-free
• Proxyt RDA 36, medium

Advantages:

• Customized, gentle cleaning and polishing
• Scratch-free cleaning of sensitive surfaces using the fine Proxyt
• without pumice
• Smooth consistency, splatter-free formula
• Fresh peppermint taste

Light-curing luting composite for the high-esthetic cementation.

Indications: Adhesive cementation of translucent all-ceramic restorations with a thickness of < 2.0mm (veneers, inlays, onlays)

Advantages: High shade stability due to a specific amine-reduced formulationLow wear, good polishing properties

Shades:

• Clear: Neutral effect (50% translucency)
• +1: Little brightening (24% translucency)
• +2: Brightening, whitening effect (12% translucency)

Light-curing, resin-based fissure sealants for the preventive sealing of pits and fissures, using the enamel etching technique. The new, ergonomically shaped syringe fits snugly in the palm of the hand and therefore allows the sealants to be dosed and applied more accurately than previous versions of the products.
Helioseal Clear- Transparent sealant for excellent esthetic results and easy monitoring of fissures in case of doubt

Advantages:

• Precise application, the basis for top quality sealing results
• Well-proven in many years of clinical use
• Effective protection against caries

Light-curing, highly transparent single-component luting material for brackets.

Advantages:

• No dosing, no mixing
• Brackets can be placed on the tooth surfaces without time pressure due to the light-curing properties of the material

For true-to-nature characterization.

Indications: Individual characterization of direct and lab-fabricated composite restorations -

• Masking of discoloured tooth structure
• Characterization of CAD/CAM veneers fabricated chairside

Advantages:

• True-to-nature characterization of high-end composite and CAD/ CAM-fabricated restorations
• User-friendly direct application without dilution
• High masking capability even when applied in thin layers
• Smooth consistency
• 0.4-mm tips for precise application
• The ideal complement to IPS Empress® Direct and IPS EmpressCAD

The two consistencies Heavy Body and Monophase are now offered as Virtual 380 in new, large cartridges. These XXL cartridges are suitable for use in e.g. Pentamix, Plug & Press Dispenser and MixStar mixing units.

Advantages:

•  Ready-to-use, large cartridge - convenient handling
• Separate activation as in the case of foil bags is not required
• Economical package size - contents 380ml

Multiple-use, 2-step polishing system for composites and amalgam.

Indication: Politip® is indicated for the polishing of restorations made of composite material and amalgam.

OptraStick is a flexible placement instrument which features a ballshaped, flexible adhesive tip. The tip allows small objects, inlays, onlays and veneers (e.g. made of a IPS Empress®, IPS e.max®) to be picked up, held, carried and placed quickly and easily.

Advantages:

• Easy pick-up
• Strong adherence
• Secure positioning

Desensitizing varnish for hypersensitive teeth.

Indications:

• Hypersensitive cervicals
• Hypersensitivities due to bleaching
• Desensitization after professional tooth cleaning, scaling and rootplaning
• Dentin protection under restorative materials

Advantages:

• Long-term relief
• Quick to work
• Quick to use
• Gentle to gums
• Free Stand Single Dose - free-standing with grip surface

Self-curing glass ionomer cement with high translucency.

Indications: Cementation of full-cast crowns or veneers, high-strength allceramic materials and orthodontic bands.

Advantages:

• High translucency
• 1:1 mixing ratio
• Radiopacity
• Strong bond to dentin
• Optimum wetting of powder and liquid
• Easy removal of excess material

Crystal glass ornaments that are bonded to the labial surfaces of natural upper anterior teeth without previous preparation.

Self-curing composite core build-up material with light curing option. Two consistencies, two techniques, two curing methods and four shades provide an optimum foundation for the reconstruction of vital and non-vital teeth with part or most of the clinical crown missing.

Advantages:

• Based on Ivoclar Vivadent‘s long-term experience in the field ofcomposite technology
• A suitable option for every case: Self- or light-curing
• Four different shades
• Coordinated system with the self-etching AdheSE

Indication: Astropol® is indicated for the pre-polishing and polishing of restorations made of composite material and amalgam.

Astropol/24 :

• Astropol F - Polishing tips (grey) for the removal of excess composite material from proximal and occlusal surfaces
• Astropol P - Polishing tips (green) for polishing composite materials
• Astropol HP - Polishing tips (pink) for final high-gloss

 Te-Econom Bond is a single-component bonding agent for enamel and dentin bonding in conjunction with the total-etch technique.

Indication: Direct light-curing restorations

Advantages:

• One-bottle, one-layer adhesive
• High bond strengths
• Minimal evaporation of solvent (alcohol)
• Storage at room temperature

Fluorescent disclosing liquid to expose plaque by means of a polymerization light.

Advantages:

• No inconvenient staining of tongue and mucous membranes
• Easy handling
• Fluorescent under any polymerization light

Light-curing, resin-based fissure sealants for the preventive sealing of pits and fissures, using the enamel etching technique. The new, ergonomically shaped syringe fits snugly in the palm of the hand and therefore allows the sealants to be dosed and applied more accurately than previous versions of the products.
Helioseal - White-shaded sealant that permits easy control during application and at recalls

Advantages:

• Precise application, the basis for top quality sealing results
• Well-proven in many years of clinical use
• Effective protection against caries

Systemp.desensitizer is suitable for the prevention and reduction of dentin hypersensitivity and post-operative pain.

Indications:

• Temporary restorations (e.g. with Systemp.inlay, Systemp.onlay, Systemp.c&b II)
• Conventional cementation of indirect restorations
• Direct restorations (e.g. amalgam, glass ionomer cement)

Advantages:

• Needs to be brushed into dentin surfaces for only 10 seconds; no light-curing required
• The use of Systemp.desensitizer will not affect the retention of temporary restoratives, cements or filling materials
• Has a cleaning effect on the lesion