Slingco India Pvt. ltd

Jayanagar, Bangalore, Karnataka

The Bollard Clamp is an easy to use tensioning device that can be used without risk of damage to the tensioned rope. This is a major advantage over standard types of gripping devices, which could potentially crush or compress the rope or its outer coating. Installation of the Bollard Clamp is simple, requiring no tools, and the device can be fitted anywhere along the length of the rope using a spring-loaded rope captivation lever. One installed, the clamp utilises the friction created over a large area of the rope to enable the required tension to the specified WLL. N.B. Figures given in the table are indicative only. Nominal figures/actuals are as per datasheet with tolerances of +/-5%. Datasheets available on request.

Our cable laying rollers are of steel construction with zinc plating for general purpose cable installation work in trenches. The rollers are supplied in a range of configurations which are designed for specific cable control requirements Different roller configurations available Suitable for bridging existing cable in trenches or ducts Roller with sealed ball-bearings for smooth operation Lightweight for ease of use Suitable for use in power, telecoms and utility installations

Choose from a comprehensive range of cable and conductor pulling products, each designed and engineered to deliver reliable performance for the installation of cables or pipes through ducts, conduits and trenches. The cable sock adds little to the overall diameter of the cable and free passage is normally available through sheave blocks and pipes. Light-medium and heavy duty optionsPrecise, hand-woven constructionIdeal on new for old cable installationsSwivel links for reduced torque build-upGrowing range of pulling accessories

Slingcos Catchblock Tug Unit is a remotely operated, motorised aluminium chassis tug unit for the purpose of changing out de-energised overhead power cables or ground wires. The compact unit is powered using a rechargeable li-ion battery which makes for quick onsite changeover in remote areas and designed to be used with conductor replacement systems and inspection devices. The unit comes complete with a standard recovery device. Max tractive effort 60 kg, up to 40 kg on a 20 degree incline on a 20mm diameter conductor*Automatic soft start - 4 kph with a run time 120 minutes from fully charged battery2 driven rubber tyred wheels via a compact 18V 12Ah battery433MHz radio remote control 500m range

We have a range of connectors that are used to connect rope, swivels and other objects. With high strength pins and smooth rollers, you can safely connect rope without fear of fraying or damage. The 90 connectors are a convenient way to link wire and other non-rope items. Our connectors have high strength hex pins. The rope to rope connector has two rollers to protect rope from becoming frayed. Easy to use Several styles available Rope-to-rope or rope-to-swivel

Slingco Directional Drilling Swivels are designed for horizontal directional drilling or underground cable installation only. Use to counter rotational forces caused by boring. They are able to be greased for removal of dirt and contaminants.

The Conductor Replacement Roller (CRR) provides a simple, conductor-deployed protection system using a lightweight aramid rope. The CRR unit enables the safe exchange of conductors in three easy steps: Laying out the pulling cable, e.g. with an electric pulling robot.Tensioning the CRR Block assembly.Feeding a new conductor through the cable pulleys of the CRR Block.The CRR rollers have spring loaded gripping feature to secure the rope laterally without impinging any rotational movement as the rollers rotate around the axis of the conductor. Considerable effort has been made to reduce the complexity of the design to provide a simple mechanism to hold the rope and then connect around the conductor. Designed for rapid deployment and secure connection the external locking mechanism can be inspected from ground level.

Slingco offer two lightweight, rugged, reliable and durable aluminium distribution stringing blocks. Used in conjunction with purpose designed accessories, they have proven extremely popular with utility operators and their contractors for the exceptional versatility they offer in terms of installation applications and locations. Their low-friction bearings deliver high efficiency, which helps to maximise stringing distances while minimising pulling tensions and reducing loads on stringing equipment. We also offer three crossarm bracket options and various ball clevis attachments.

Conduit riser socks are designed to support cables within conduit. Designed to match standard conduit sizes. These grips come in single and double weave as indicated in the table below. Also available in Split Ring design for supporting cable already installed or when the end of the cable is not available.

Slingco has developed a range of cable socks tailored for the renewable energy sector for use in: Cable installation on-shore and off-shoreCable support inside wind turbinesCable managementFor wind turbines, special features have been adapted to allow for minimal contact with the actual cable while still allowing excellent working loads and cable support. The Slingco Wind Turbine Support Sock is manufactured from 316 Stainless Steel, has an extended fleeting thimble eye and provides cable support and control inside the wind turbine. It features rounded copper ferrules and offers reduced cable contact for high vibration environments. Custom socks can be adapted to meet any requirement.

Heavy Duty support socks made from stainless steel are perfect for supporting heavier cable, conduit or any other cylindrical object. They are quite often used by utilities and contractors to support cables transitioning from overhead to underground. We have also developed a range of socks specifically tailored for the renewable energy sector for cable installation, support and management, and for outdoor riser pole applications. Available as single eye, double eye or lace-upMade from stainless steelOne sock can support multiple cables

Our heavy duty Hose Restraints are a safety restraining system designed to prevent whipping in the event of a pressurised hose becoming detached from its fitting. The socks are available in both galvanised and stainless steel variants as well as with different styles of eyes flexible, thimble eye, threaded bolt and universal eye. Made with galvanised or stainless steel optionsChoice of eye or end fittingRecommended in safety-critical situationsHigh strength

Our light duty cable socks are used to support cables in locations such as data centres, offices and control centres. They are easy to install and are designed so that they function perfectly in supporting the cables but do not cause any damage. LightweightEasy to installCan be used for Fibre Optic cabling

Our range of standard duty cable support socks includes the usual options of single eye, double eye, offset eye or universal eye with closed mesh, rod closing or lace closing lattice options. The range also includes our dual weave conduit risers. Made from 304 grade stainless steelChoice of lattice closed mesh or lace-upBox grip s available with support ring for electrical cabling.

Our cable protectors provide a safe, quick and efficient way of conveying and securing downhole cables into well-bores while eliminating the risk of compression-induced damage. A full range of products is available to suit ESP cables, control lines, umbilicals and encapsulated bundles of all sizes. Streamlined design prevents hang-ups downhole.Purpose-designed productsEight point friction pad gripping system for a secure reliable gripNo compression-induced damage to cables

Our team manufactures a range of centralizer products (or casing spacers) suitable for use in vertical, deviated and horizontal wells. Designed to deliver reliable centralizing and spacing of piping within large diameter pipes, they are available in rigid and bow spring options. Available in multiple sizesVarious blade configurationsRigid and bow springSuitable for vertical, deviated and horizontal wells

Slingcos Cable Protector Installation Tool Kits allow you to safely and efficiently install Slingco protectors. Tool kits are available in hydraulic and manual configurations. Slingcos line of Cable Protectors provide a safe, quick and efficient way of conveying and securing downhole cables into well-bores. They are ideal for the protection of any size ESP cables, control lines, umbilical cables and encapsulated bundles in well-bores

35KV Jumper Clamps used as a part of jumper cable assemblies to bypass work areas when equipment is under repair or being upgraded. Slingco Jumper clamps are lightweight and impact resistant making them incredibly durable.

Use the Slingco 3k Strap Hoist to splice, dead end, and sag lines. The Slingco 3k Strap Hoist features an interlocking pawl lever system with dual pawl springs for controlled tightening and releasing of the strap and to ensure the hoist is engaged while in use. The strap hoist complies with ASME B-30-21 standard and all units are tested to 125% of load. The Slingco 3k Strap Hoist uses pressure die castings for a professional look, consistent material properties, and smooth finish. The strap is hi-viz bright green in color for easy visibility. The strap hoist has three operating positions: lift/pull, lower/release, and freewheeling.

Slingco Banding Tools deliver a fast and easy way to install banding clamps. Designed for fast and efficient installation of steel bands for cable socks, hoses and many other applications, their drop-forged construction and comfortable design makes them quick and easy to use and guarantee a long and useful tool life. We offer three different tool options, with bands and buckles available for each. In addition to our range of steel bands available from stock we can also manufacture custom sizes if required. Please contact us with your requirements.

When your work calls for a reliable, powerful cutting tool, turn to Slingco Bolt Cutters. Designed and built for the demanding, daily use of utility professionals and contractors, these cutters deliver consistent performance. Our hardened steel blades provide clean, powerful cuts across a wide variety of materials, including soft metals, chain, and rebar. The ergonomic handles are engineered for optimal grip and leverage, which helps reduce operator fatigue and improves control during tough applications. With a variety of sizes available, Slingco has the right tool for the job, helping you work efficiently and safely.

Slingcos Pulling Head is designed to be used for subsea cable pull-ins, allowing a messenger line to be attached to the pulling head to guide the cable along the sea floor and up through a J tube for installation to a wind turbine.

Providing safe and effective grounding connections. Slingco bronze flat face clamps meet ASTM F855 and have a maximum line range of 1.5 (38 mm) which allows them to be used with a wide variety of grounding applications. There are set screws in the moveable jaw which allows the user to adjust and make sure that there is a secure connection between the clamp and cable. The Slingco flat face clamps come with serrated jaws and are available with a T-handle or Eye Bolt.

Slingcos Hand Line Tools feature a 3 nylon fiberglass block, with a safe working load limit of 1, 000 lb, and a double locking snap with a safe working load limit of 5, 000 lb. Our 3 Hand Line Blocks sheave can accommodate a 5/8 diameter rope, and operates smoothly on the 1/2 diameter axle and swivel bearings. The side opening feature allows quick access to remove the hand line

Jib Head Adapter for mounting arm assemblies and attachments. Designed for square jib for round attachments.

Choosing pole line hardware is quite often done by closest match - choosing the nearest similar product a supplier has available. While this may often suffice, it means that jobs have to be undertaken with a less than perfect product for the task at hand. Wouldnt it be great if it was possible to source product equivalents that comply with standards, meaning that you were able to work with exactly what you need at a price you can afford? Thats what we undertake to deliver with our unique Solution Approach

The Slingco ACSR, CUAL, and Guy wire Ratchet Cutters are designed to cut hard cables cleanly and smoothly. The ratchet design provides leverage, increasing cutting force with each open and close of the handles. Makes cutting cable easier compared to manual cutters. The handles surfaces are designed to allow a firm, secure grip. The ratcheting action makes these cutters easy to operate even in limited spaces with just moderate pressure

Makes handling large cable reels quick and easy, on-site or in warehouses. The Slingco Reel Lifter is a high capacity, compact unit that allows users in the utility construction industry to safely load, transport, and dispense wire and/or cable on-site. It is also used in many industrial applications to make moving and relocating reels in a warehouse easy. Now a task that normally used a team of three or four people can be done with just one, allowing the crew to operate more efficiently!

Slingco offers an expanding line of rubber blanket accessories to make securing and attaching rubber blankets safe and easy. Many accessories are hotstick compatable and designed for safe use with gloves.