Smart Cooling Systems

Siruvani, Coimbatore, Tamil Nadu

Coil Cooling Tower is an equipment which is used to cool and maintain the temperature of process hot water at a particular level. This operates on the principle of heat transfer by a heat exchanger with extended fins. The fan is deiven by an Electric Motor. Applying dry cooling means saving water. Dry Cooling Tower is mounted on a heavy duty channel base frame. Non corrosive fibre glass / GI panels are used for enclosure. Aero dynamically balanced high efficiency axial flow fans with low noise are used. The motors are IP 55 class with extended SS shaft. The low speed of the motor minimises noise and increases efficiency. Motors are specially designed to withstand moisture, rain and dust. The hot water from the diesel engine is sent to the inlet of the Dry Cooling Tower. This hot water is cooled and cold water from the outlet of the cooling tower is connected to a pump which pumps the water to the diesel engine (or any other load) to pick up the heat from the generator.

Win coil cooler contains rugged steel construction.Non corrosive epoxy painting in frame.Extruded fins used for higher cooling performance.Wings fans for high air flow with adjustable pitch.TEFC - (Total enclosed fan cooled Siemens motor) use.Pipe line leak test up to 5 bar.

We are the leading manufacture of high quality Coolers to our clien tle. The coolers provide two necessary functions that provide the conditioning of compressed air. Firstly it reduces the temperature of the air to a safe operating range while secondly, removing the moisture condensed during the cooling process.

Air Cooled After Coolers :Dryers are sized according to the flow, pressure, temperature and dew point required of the compressed air. If these conditions are changed, the resulting efficiency of the dryer can be drastically affected. The temperature of the compressed air leaving a compressor varies from 65 C to 200 C, depending on the type of compressor, it is essential that an After Cooler be installed upstream of most dryers because it will lower the temperature to required level and will remove 50 to 75% of water vapour contained in the air. After coolers are available in either air or water cooled units.

Work pressure - 16 barHeat exchanger is fully enclosed.Compact Size.Low power consumptionEasy for installationCorrosion resistance paintingHigh Efficiency copper tubes.