Rajkot, Gujarat, India
Our Products
The trend today is clearly toward high performance twist drills made of tungsten carbide or other premium materials, combined with innovative geometries, tighter tolerances, and advanced coatings. The pressure to reduce costs through productivity gains is driving this change.
| Item Code | Cutting Dia. | Shank Dia. | Flute length | Over all length |
|---|---|---|---|---|
| D | d | L2 | L1 | |
| S3DHP030 | 3.0 MM | 6 | 20 | 62 |
| S3DHP031 to 037 | 3.1 to 3.7 | 6 | 20 | 62 |
| S3DHP038 to 047 | 3.8 to 4.7 | 6 | 24 | 66 |
| S3DHP048 to 060 | 4.8 to 6.0 | 6 | 28 | 66 |
| S3DHP061 to 070 | 6.1 to 7.0 | 8 | 34 | 79 |
| S3DHP071 to 080 | 7.1 to 8.0 | 8 | 41 | 79 |
| S3DHP081 to 100 | 8.1 to 10.0 | 10 | 47 | 89 |
| S3DHP101 to 120 | 10.1 to 12.0 | 12 | 55 | 102 |
| S3DHP121 to 140 | 12.1 to 14.0 | 14 | 60 | 107 |
| S3DHP141 to 160 | 14.1 to 16.0 | 16 | 65 | 115 |
| S3DHP161 to 180 | 16.1 to 18.0 | 18 | 73 | 123 |
| S3DHP181 to 200 | 18.1 to 20.0 | 20 | 79 | 131 |
| Item Code | Cutting Dia. | Shank Dia. | Flute length | Over all length |
|---|---|---|---|---|
| D | d | L2 | L1 | |
| S5DHP030 | 3.0 MM | 6 | 28 | 66 |
| S5DHP031 to 037 | 3.1 to 3.7 | 6 | 28 | 66 |
| S5DHP038 to 047 | 3.8 to 4.7 | 6 | 36 | 74 |
| S5DHP048 to 060 | 4.8 to 6.0 | 6 | 44 | 82 |
| S5DHP061 to 070 | 6.1 to 7.0 | 8 | 53 | 91 |
| S5DHP071 to 080 | 7.1 to 8.0 | 8 | 53 | 91 |
| S5DHP081 to 100 | 8.1 to 10.0 | 10 | 61 | 103 |
| S5DHP101 to 120 | 10.1 to 12.0 | 12 | 71 | 118 |
| S5DHP121 to 140 | 12.1 to 14.0 | 14 | 77 | 124 |
| S5DHP141 to 160 | 14.1 to 16.0 | 16 | 83 | 133 |
| S5DHP161 to 180 | 16.1 to 18.0 | 18 | 93 | 143 |
| S5DHP181 to 200 | 18.1 to 20.0 | 20 | 101 | 153 |
A Step Drill is used on metal at a slower speed. The science of drill bits is an exact one, with the right drill bit making all the difference between good and bad work. Only a small amount of pressure is needed with an appropriate and sharp bit.
The primary use for a centre drill is to provide a 60 hole for a tailstock centre as a support during turning. The little drill bit on the end gives clearance, and provides an oil reservoir, for the point of the centre.
| Item Code | Cutting Dia. | Shank Dia. | Flute length | Over all length |
|---|---|---|---|---|
| D | d | L2 | L1 | |
| S5DHP030 | 3.0 MM | 6 | 28 | 66 |
| S5DHP031 to 037 | 3.1 to 3.7 | 6 | 28 | 66 |
| S5DHP038 to 047 | 3.8 to 4.7 | 6 | 36 | 74 |
| S5DHP048 to 060 | 4.8 to 6.0 | 6 | 44 | 82 |
| S5DHP061 to 070 | 6.1 to 7.0 | 8 | 53 | 91 |
| S5DHP071 to 080 | 7.1 to 8.0 | 8 | 53 | 91 |
| S5DHP081 to 100 | 8.1 to 10.0 | 10 | 61 | 103 |
| S5DHP101 to 120 | 10.1 to 12.0 | 12 | 71 | 118 |
| S5DHP121 to 140 | 12.1 to 14.0 | 14 | 77 | 124 |
| S5DHP141 to 160 | 14.1 to 16.0 | 16 | 83 | 133 |
| S5DHP161 to 180 | 16.1 to 18.0 | 18 | 93 | 143 |
| S5DHP181 to 200 | 18.1 to 20.0 | 20 | 101 | 153 |
Thorough Coolant drill bits allow coolant to push chippings back up the hole in deep drilling applications whilst reducing the friction and temperature inflicted on the tool. Thorough Coolant drills are primarily for drilling Alloyed and Non alloyed Steel, Aluminium, Soft Stainless Steel, Copper, Soft Cast Iron, Plastics, etc.
| Item Code | Cutting Dia. | Shank Dia. | Flute length | Over all length |
|---|---|---|---|---|
| D | d | L2 | L1 | |
| S3DHP030TC | 3.0 MM | 6 | 20 | 62 |
| S3DHP031TC to 037TC | 3.1 to 3.7 | 6 | 20 | 62 |
| S3DHP038TC to 047TC | 3.8 to 4.7 | 6 | 24 | 66 |
| S3DHP048TC to 060TC | 4.8 to 6.0 | 6 | 28 | 66 |
| S3DHP061TC to 070TC | 6.1 to 7.0 | 8 | 34 | 79 |
| S3DHP071TC to 080TC | 7.1 to 8.0 | 8 | 41 | 79 |
| S3DHP081TC to 100TC | 8.1 to 10.0 | 10 | 47 | 89 |
| S3DHP101TC to 120TC | 10.1 to 12.0 | 12 | 55 | 102 |
| S3DHP121TC to 140TC | 12.1 to 14.0 | 14 | 60 | 107 |
| S3DHP141TC to 160TC | 14.1 to 16.0 | 16 | 65 | 115 |
| S3DHP161TC to 180TC | 16.1 to 18.0 | 18 | 73 | 123 |
| S3DHP181TC to 200TC | 18.1 to 20.0 | 20 | 79 | 131 |
| Item Code | Cutting Dia. | Shank Dia. | Flute length | Over all length |
|---|---|---|---|---|
| D | d | L2 | L1 | |
| S5DHP030TC | 3.0 MM | 6 | 28 | 66 |
| S5DHP031TC to 037TC | 3.1 to 3.7 | 6 | 28 | 66 |
| S5DHP038TC to 047TC | 3.8 to 4.7 | 6 | 36 | 74 |
| S5DHP048TC to 060TC | 4.8 to 6.0 | 6 | 44 | 82 |
| S5DHP061TC to 070TC | 6.1 to 7.0 | 8 | 53 | 91 |
| S5DHP071TC to 080TC | 7.1 to 8.0 | 8 | 53 | 91 |
| S5DHP081TC to 100TC | 8.1 to 10.0 | 10 | 61 | 103 |
| S5DHP101TC to 120TC | 10.1 to 12.0 | 12 | 71 | 118 |
| S5DHP121TC to 140TC | 12.1 to 14.0 | 14 | 77 | 124 |
| S5DHP141TC to 160TC | 14.1 to 16.0 | 16 | 83 | 133 |
| S5DHP161TC to 180TC | 16.1 to 18.0 | 18 | 93 | 143 |
| S5DHP181TC to 200TC | 18.1 to 20.0 | 20 | 101 | 153 |
