Digital Display for IR OR measurement Manual Ball loading single ball Magazine Manual Cage feeding Available in three different ranges 62 mm, 100 mm & 160 mm Low cost Suitable for small lot operation. FEATURES Manual sorting of IR and OR Automatic Ball filling with single ball Semi-Automatic Cage fitting operation PLC based control system Compact, robust and efficient design  

Used as buffer in between the machines Available as per customer requirement Easy for set up Custom made designs Available in different lengths and heights

Bearing's cup checking Measure: ID (Taper): within 5  µ, , OD : within 3  µ , Width : within 10  µ Washing of the cups Cycle Time: 16 secs Automatic master calabration feature Repeatability : OD µ , Taper µ , Width µ . Tooling Setting time Universal measurement station, sutable for all diameter and heights within machines oerating range

Attached with Intralox inlet outlet conveyors Auto loading and unloading for rings. Loading height suitable for manual loading Cycle Time: 16 secs Tooling Setting time Pneumatics: Festo / SMC HMI touch screen 7 inch Switch gears: Schineder, Siemens. Lubrication Unit for Taper measuring station.

Compact and robust design Very High speed operation High accuracy Better gauge repeatability and reproducibility. Range bound design as per size and weight of Roller. FEATURES Available in different sizes Grading in 12 grades in range 2  µ High Speed operation 80 - 200 rollers/min Tool setting time PLC: Mitsubishi or equivalent Measuring System developed by SMT.

Missing component detection in ball bearings Capable of detecting missing balls, missing rivets, missing cage Precise inspection of bearing rotational freeness Bearing rotation; precise and smooth achieved using precision spindles driven by AC servo motors Separate rejection chutes for missing component and free run NGs Operating range (Bearing OD): 30mm to 62mm Sorting classes (compartments): 2 + 1 Graphical representation for each test for better user friendliness Easy and quick master calibration facility Cycle time: as low as 2.0 sec Resetting time: 15 minutes Rigid and compact construction Excellent fidelity and repeatability in results Simultaneous inspection of all specified defects Control system: Siemens / Mitsubishi / Delta Pneumatics: Festo / SMC Full safety cover with transparent windows

Measuring machine for bore measurement and control Auto component loading; auto measurement and auto unloading Other size machine models can be developed on request) Parameters being checked: Diameter (in two different planes), Ovality (out of roundness) and Taperness Component is under rotation while measurement Cycle time: 3 sec, 5 sec and 8 sec respectively Measuring system resolution: 0.1  µ  and repeatability within 1  µ Various component sizes within permissible range can be handled by resetting the machine using change tooling  

High resolution Industrial camera used High reliability Identifies surface defects and missing parts/operation Dimensional measurement not possible. Comparative measurement with good master part. FEATURES Vision system for surface defects and missing parts Camera used as per application High speed working  

• FeatureCompact Rigid design, Before and After Grease weight facility
• UsageIndustrial

Uniform spreading of grease dispensed between inner and out bearings Cycle Time: 5 sec Careful handling of the rings so that no ring damage will take place Tooling Setting time FEATURES PLC Control system: Siemens / Mitsubishi / Delta Pneumatics: Festo / SMC HMI touch screen 7 inch Servo motors to achieve position accuracy Switch gears: Schneider, Siemens Processing of 4 bearings at a time Data Logging, Alarms, Real time Run Chart display  

Attached with Intralox inlet outlet conveyors Auto loading and unloading for rings. Loading height suitable for manual loading Cycle Time: 16 secs Tooling Setting time Pneumatics: Festo / SMC HMI touch screen 7 inch Switch gears: Schineder, Siemens. Lubrication Unit for Taper measuring station.

Auto ball separation station Female cage feeding station Male cage feeding station Male cage presence check Female cage presence check Component assembly (Male and female cages with bearing) Pre-pressing ( For diameter 72mm and above) Press (hydro-pneumatic) Final control (missing or un-pressed rivet) NG sorting Unloading Male cage and female cage stock to be loaded manually Stock capacity (10 minutes) Cycle time: 3.5 to 4 sec Resetting time: 60 minutes PLC: Siemens / Mitsubishi/ Delta HMI: 6 or 7 inch touch screen operating panel Measuring sensor: Marposs / Tesa Measuring sensor signal conditioner: SMT Pneumatics: Festo / SMC Switch gears: Schneider, Siemens. Data Logging, Alarms, Real time Run Chart display