GST : 24AYTPS1105M1Z2
4.6/5
Our Product / Services
Our product range contains a wide range of Digital Pressure Gauge and Temperature Gauges
Digital pressure gauges, compared to their analog counterparts with dials and needles, offer a digital display for pressure readings and often come with additional features. Here's a breakdown of their typical specifications.
General Specifications
· Pressure Range: The range of pressure the gauge can measure, similar to other pressure transmitters (e.g., from fractions of psi to thousands of psi).
· Accuracy: Expressed as a percentage of full scale (%FS). Typical accuracy for good quality gauges is ±0.1%FS to ±0.5%FS.
· Display: Digital gauges provide a clear and easy-to-read digital readout of the pressure measurement.
· Pressure Units: They can often display pressure readings in various engineering units like psi, kPa, bar, mmHg, and more.
Performance Specifications
· Temperature Limits: The operating temperature range the gauge can withstand.
· Proof Pressure: The maximum pressure it can handle without permanent damage (typically 1.5 to 2 times the upper pressure range limit).
· Burst Pressure: The pressure that will cause catastrophic failure (typically 4 times the upper pressure range limit).
· Response Time: The time it takes for the display to update in response to a pressure change (usually faster than analog gauges, in milliseconds).
Additional Features
· Data Logging (Optional): Some gauges can store pressure data internally or on an external memory card for later analysis.
· Min/Max Recording: Some models can track and display the minimum and maximum pressure readings recorded during use.
· Calibration: Calibration is necessary to ensure accuracy. Some gauges offer features like user-friendly calibration routines.
· Battery Life: Battery-powered gauges typically specify their operating life on a single battery charge.
· Auto-Shutoff: A power-saving feature that automatically turns off the gauge after a period of inactivity.
· Backlight: A feature for improved visibility in low-light conditions.
· Enclosure Rating (IP rating): Indicates the level of protection against dust and water ingress (e.g., IP54 for dust resistance and splash water protection).
Factors to Consider When Selecting a Digital Pressure Gauge
· Pressure Range: Choose a gauge with a range that comfortably covers the pressure you intend to measure.
· Accuracy: Select a gauge with accuracy that meets your application's requirements.
· Features: Consider additional features like data logging, min/max recording, or backlight based on your needs.
· Environmental Conditions: Choose an enclosure rating suitable for the dust and moisture levels in your application environment.
· Portability: If portability is important, consider the size and weight of the gauge.
By understanding these specifications and factors, you can select a digital pressure gauge that offers the right combination of features, accuracy, and usability for your specific pressure measurement needs.
Temperature gauges provide a local visual display of temperature readings, often used in various industrial and commercial settings. Here's a breakdown of their typical specifications:
General Specifications
· Temperature Range: The range of temperatures the gauge can display (e.g., -40°C to +300°C).
· Temperature Dial: This displays the temperature scale (e.g., Celsius or Fahrenheit) and markings for the measurable temperature range.
· Pointer: This indicates the measured temperature on the temperature dial.
Performance Specifications
· Accuracy: Expressed as a percentage of full scale (%FS) or in temperature units (°C or °F). Typical accuracy for good quality gauges is ±2%FS to ±5%FS. Dial thermometers generally have lower accuracy than digital thermometers.
· Response Time: The time it takes for the gauge to reflect a change in temperature (usually slower than electronic thermometers, ranging from seconds to minutes).
Additional Features
· Stem Length: The length of the metal part inserted into the medium to measure temperature. Choose a stem length that reaches the point of desired temperature measurement within the process or environment.
· Material of Construction: The materials used in the gauge housing, stem, and dial. Common materials include stainless steel, brass, and plastic. The selection depends on factors like temperature range, pressure resistance, and corrosion potential of the environment.
· Fill Material (Liquid Filled Gauges): Some gauges are filled with a liquid (often glycerin or silicone oil) to dampen vibrations and improve pointer movement readability.
· Max/Min Recording (Optional): A feature in some gauges that tracks and displays the highest and lowest temperatures recorded.
· Alarm (Optional): Certain models can be equipped with alarms to trigger at pre-set high or low-temperature thresholds.
Environmental Specifications
· Ambient Temperature Range: The range of surrounding temperatures the gauge can function within without compromising performance.
· Ingress Protection (IP rating) (Optional): A rating for some gauges indicating their resistance against dust and water ingress (e.g., IP54 for dust resistance and splash water protection).
Factors to Consider When Selecting a Temperature Gauge
· Temperature Range: Choose a gauge with a range that covers the entire temperature spectrum you intend to monitor.
· Accuracy: Select a gauge with accuracy suitable for your application's requirements. Dial thermometers may be sufficient for non-critical applications where high precision isn't essential.
· Response Time: Consider how quickly you need the gauge to reflect temperature changes in your application.
· Stem Length: Choose a stem length that reaches the appropriate measurement point within your process or environment.
· Material of Construction: Select materials compatible with the temperature range, pressure, and potential corrosive elements in your application.
· Additional Features: Consider optional features like max/min recording, alarms, or an IP rating based on your needs.
By understanding these specifications and factors, you can select a temperature gauge that provides a clear and reliable visual indication of temperature for your monitoring applications.
Additional Information:
Packaging Details : BOX
Bhavin Shah (Soham Automation)
33, Sapnay, Near Parimal Under Pass, Paldi, Ahmedabad, Gujarat - 380007, India
https://www.sohamautomation.com
Share us via
