Yamunanagar, Haryana, India
Verified
Add Review
Our Products
We are the manufacturer of Brass Bushes. Our bushes are made of high quality graded material conforming to international specifications and properties. To adhere to the composition and achieve best properties, we use the right material. Our brass bushes are made out of virgin metals for alloying, thus drastically minimizing the impurities at the source itself and imparting the best properties to our products. The bushes are machined and ground to smooth surface finishes achieving excellent bearing properties. With the perfect material and precise manufacturing, our products are manufactured to perform and last long.
Chemical Composition
| Copper Alloys | CU | SN | PB | ZN | FE | NI | AL | MN | SI | Impurities |
|---|---|---|---|---|---|---|---|---|---|---|
| LCB-1 (Standard:IS:292-1983) | 70-77 | 1-3 | 2-5 | Rem. | 0.5 | 0.01 | ||||
| LCB-2 (Standard: BS 1400) | 63-67 | 1.5 | 1-3 | Rem. | 0.5 | 0.01 | ||||
| DCB 1 (Standard: BS 1400) | 59-63 | 0.25 | Rem. | 0.5 | 0.75 | |||||
| DCB 3 (Standard: BS 1400) | 58-63 | 1 | 0.5-2.5 | Rem. | 0.8 | 1 | 0.2-0.8 | 0.5 | 0.05 | 2 |
| PCB 1 (Standard: BS 1400) | 57-60 | 0.5 | 0.5-2.5 | Rem. | 0.3 | 0.5 | 0.5 | |||
| SCB 1 (Standard: BS 1400) | 70-80 | 1-3 | 2-5 | Rem. | 0.75 | 1 | 0.01 | 1 | ||
| SCB 3 (Standard: BS 1400) | 63-70 | 1.5 | 1-3 | Rem. | 0.75 | 1 | 0.1 | 1 | ||
| SCB 4 (Standard: JIS) | 60-63 | 1-1.5 | 0.5 | Rem. | 0.01 | 0.75 |
We are the manufacturer of Brass Rods. These Brass Rods are known for their high strength, corrosion resistance and fine finish. Owing to these attributes, our Brass Rods are used in a several projects, such as construction, engineering etc. One feature that makes our product stand out is its ability to resist varying weather conditions. Our offering is made of high quality brass raw materials and is of extremely sturdy build. These are of high tensile strength and extremely durable. These also have a long life giving flawless performance. Superior quality precision tools are used for forming durable and tough quality brass rods. Last but not the least, we assure to provide you with the best quality brass rods.
Chemical Composition
| Copper Alloys | CU | SN | PB | ZN | FE | NI | AL | MN | SI | Impurities |
|---|---|---|---|---|---|---|---|---|---|---|
| LCB-1 (Standard:IS:292-1983) | 70-77 | 1-3 | 2-5 | Rem. | 0.5 | 0.01 | ||||
| LCB-2 (Standard: BS 1400) | 63-67 | 1.5 | 1-3 | Rem. | 0.5 | 0.01 | ||||
| DCB 1 (Standard: BS 1400) | 59-63 | 0.25 | Rem. | 0.5 | 0.75 | |||||
| DCB 3 (Standard: BS 1400) | 58-63 | 1 | 0.5-2.5 | Rem. | 0.8 | 1 | 0.2-0.8 | 0.5 | 0.05 | 2 |
| PCB 1 (Standard: BS 1400) | 57-60 | 0.5 | 0.5-2.5 | Rem. | 0.3 | 0.5 | 0.5 | |||
| SCB 1 (Standard: BS 1400) | 70-80 | 1-3 | 2-5 | Rem. | 0.75 | 1 | 0.01 | 1 | ||
| SCB 3 (Standard: BS 1400) | 63-70 | 1.5 | 1-3 | Rem. | 0.75 | 1 | 0.1 | 1 | ||
| SCB 4 (Standard: JIS) | 60-63 | 1-1.5 | 0.5 | Rem. | 0.01 | 0.75 |
We are the manufacturer of Gunmetal Casting. We are among the prominent Gun Metal Castings Manufacturers and Suppliers all over India. Gun Metal Castings brought forth by the company, are available in various hardness, tensile strengths and dimensions. Gun Metal Castings are manufactured using high grade raw materials in compliance with international quality standards. Gun Metal Castings of our company are widely accepted in different industries for their brilliant surface finish. Gun Metal Castings are highly appreciated by clients for their tolerance capacity, dimensional accuracy and durability. Typical uses of Gunmetal Casting is Pressure tight bearings, bushes, pumps and pump fittings, valves, valve bodies, and valve guides under corrosive marine conditions, Gear and worm wheels, Bearings for aero engines, diesel engines, electrical generators and rolling mills etc.
Chemical Composition
| Copper Alloys | CU | SN | PB | ZN | FE | NI | P | AL | SI | SB | S | BI | Impurities |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LTB-1 (Standard: IS: 318-1981) | Rem. | 6-8 | 2.5-3.5 | 1.5-3 | 0.3 | 2 | 0.01 | 0.01 | 0.3 | 0.7 | |||
| LTB-2 (Standard: IS: 318-1981) | Rem. | 4-6 | 4-6 | 4-6 | 0.35 | 2 | 0.01 | 0.02 | 0.4 | 0.8 | |||
| LG-1 (Standard: BS 1400) | Rem. | 2-3.5 | 4-6 | 7-9.5 | 0.5 | 2 | 0.03 | 0.01 | 0.02 | 0.25 | 0.08 | 0.1 | 1 |
| LG-2 (Standard: BS 1400 | Rem | 4-6 | 4-6 | 4-6 | 0.5 | 2 | 0.01 | 0.02 | 0.05 | 0.8 | |||
| LG-4 (Standard: BS 1400) | Rem. | 6-8.05 | 2.5-3.5 | 1.5-3 | 0.2 | 2 | 0.01 | 0.01 | 0.25 | 0.05 | 0.7 | ||
| RG-5 (Standard: DIN) | 84-86 | 4-6 | 4-6 | 4-6 | 0.2 | 2 | 0.03 | 0.01 | 0.01 | 0.25 | 0.06 | ||
| RG-7 (Standard: DIN) | 83-85 | 6.8-8 | 5.3-7 | 3.3-5 | 0.2 | 1-1.5 | 0.03 | 0.01 | 0.01 | 0.25 | 0.03 | ||
| BC-1 (Standard: JIS) | 79-83 | 2 - 4 | 3-7 | 8-12 | 0.35 | 1 | 0.05 | 0.01 | 0.01 | 0.2 | |||
| BC-2 (Standard: JIS) | 86-90 | 7 - 9 | 0-1 | 3 - 5 | 0.2 | 1 | 0.05 | 0.01 | 0.01 | 0.2 | |||
| BC-6 (Standard: JIS) | 83 - 87 | 4 - 6 | 4 - 6 | 4 - 6 | 0.3 | 1 | 0.05 | 0.01 | 0.01 | 0.2 | |||
| BC-7 (Standard: JIS) | 86-90 | 5 - 7 | 1-3 | 3-5 | 0.2 | 1 | 0.05 | 0.01 | 0.01 | 0.2 | |||
| C83600 (Standard: ASTM) | 84 - 86 | 4.3 - 6 | 4 - 5.7 | 4.3 - 6 | 0.25 | 1 | 0.05 | 0.005 | 0.005 | 0.25 | 0.08 | ||
| C84400 (Standard: ASTM) | 79 - 82 | 2.5-3.5 | 6-8 | 7-10 | 0.4 | 0.8 | 0.02 | 0.02 | 0.005 | 0.25 | 0.08 |
We are the manufacturer of Brass Ingot. We are prime Manufacturer and Supplier of Brass Ingots that are widely used in industrial applications. These Brass Ingots are manufactured using high-quality raw materials along with cutting-edge technology to bring forth an ideal range of Brass Ingots in the market. These Brass Ingots are available in various specifications depending upon buyer’s requirements. We have an efficient logistics system to ensure timely delivery of our consignments. Fabricated using superior grade materials, our Ingots are appreciated for their excellent finish, high strength and corrosion resistance. Located in Haryana, India, we are a reputed manufacturer of Brass Ingots. We have developed a strong logistic network to ensure customers worldwide receive their order of Brass Ingots within the postulated time.
Chemical Composition
| Copper Alloys | CU | SN | PB | ZN | FE | NI | AL | MN | SI | Impurities |
|---|---|---|---|---|---|---|---|---|---|---|
| LCB-1 (Standard:IS:292-1983) | 70-77 | 1-3 | 2-5 | Rem. | 0.5 | 0.01 | -- | -- | -- | |
| LCB-2 (Standard: BS 1400) | 63-67 | 1.5 | 1-3 | Rem. | 0.5 | 0.01 | -- | -- | -- | |
| DCB 1 (Standard: BS 1400) | 59-63 | 0.25 | Rem. | 0.5 | -- | -- | 0.75 | |||
| DCB 3 (Standard: BS 1400) | 58-63 | 1 | 0.5-2.5 | Rem. | 0.8 | 1 | 0.2-0.8 | 0.5 | 0.05 | 2 |
| PCB 1 (Standard: BS 1400) | 57-60 | 0.5 | 0.5-2.5 | Rem. | 0.3 | 0.5 | -- | -- | 0.5 | |
| SCB 1 (Standard: BS 1400) | 70-80 | 1-3 | 2-5 | Rem. | 0.75 | 1 | 0.01 | -- | -- | 1 |
| SCB 3 (Standard: BS 1400) | 63-70 | 1.5 | 1-3 | Rem. | 0.75 | 1 | 0.1 | -- | -- | 1 |
| SCB 4 (Standard: JIS) | 60-63 | 1-1.5 | 0.5 | Rem. | 0.01 | -- | -- | 0.75 |
We are the manufacturer of Sand Casting. Through Sand Casting, we mainly manufacture bushes, plates, rod, bar, liners, nuts, switch gears parts, valve bodies, aircraft parts, rings, flanges and covers among many more products. Our scope of casting is from 50 grams to 1200 Kilograms of a single piece. We have 4 large oil furnaces for producing heavy Sand Casting. Sand Casting process consist formation of a mold from sand mixture and then allowing casting process by pouring liquid metal into the mold. Until the liquid metal doesn't change its state, the mold is kept in cooling process. We are one of the leading foundries based in India providing manufacturing of Sand Casting products to satisfy the custom needs. We provide the best Sand Casting with various method suiting industry needs with maintaining quality.
We are the manufacturer of Phosphor Bronze Bushes. We offer Phosphorus Bronze Bushes which are widely appreciated by the clients in the national and international market. This product is designed by experts of market by consuming high grade components and newest techniques along with specifications in compliance with national quality standards. Offered range is well examined on previously defined parameter for delivering defect free range. Phosphor Bronze is broadly admired high strength and ductility, excellent spring properties, good bearing qualities and wear resistance, excellent corrosion resistance and good resistance to weather conditions.
Chemical Composition
| Copper Alloys | CU | SN | PB | ZN | FE | NI | P | AL | SI | SB | Impurities |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PB 1 (Standard: BS 1400) | Rem. | 10 Min | 0.25 | 0.05 | 0.1 | 0.1 | 0.5 Min | 0.01 | 0.02 | 0.6 | |
| PB 2 (Standard: BS 1400) | Rem. | 11 - 13 | 0.5 | 0.3 | 0.15 | 0.5 | 0.15 Min | 0.01 | 0.02 | 0.2 | |
| PB-4 (Standard: BS 1400) | Rem. | 9.5 Min | 0.75 | 0.5 | 0.5 | 0.4 Min | 0.5 | ||||
| Phosphorus Bz Grade-1 (Standard: IS: 28-1985) | Rem. | 6-8 | 0.25 | 0.5 | 0.3 | 0.7 | 0.3-0.5 | 0.01 | 0.02 | 0.1 | 1.2 |
| Phosphorus Bz Grade-2 (Standard: IS: 28-1985) | Rem. | 10 Min | 0.25 | 0.25 | 0.1 | 0.1 | 0.5 Min | 0.01 | 0.02 | 0.6 | |
| Phosphorus Bz Grade-3 (Standard: IS: 28-1985) | Rem. | 6.5-8.5 | 2-5 | 2 | 1 | 0.3 Min | 0.5 | ||||
| Phosphorus Bz Grade-4 (Standard: 28-1985) | Rem. | 9-11 | 0.25 | 0.05 | 0.25 | 0.15 | 0.8 | ||||
| Phosphorus Bz Grade-5 (Standard: 28-1985) | Rem. | 11-13.1 | 0.5 | 0.3 | 0.15 | 0.5 | 0.15 Min | 0.01 | 0.02 | 0.2 |
We are the manufacturer of Aluminium Bronze Bushes. All these products are manufactured using quality raw material, latest technology and advanced machinery. The raw material used in manufacturing our products are procured from trusted vendors of the market. Also, tested on various parameters, these products are available in various sizes and can be customized as per the requirements of our customer's. Our Aluminium Bronze Bushes are frequently used as impellers in automotive industries. Furthermore, we also provide these bushes in various diameters and dimensions as to meet clients' requirements. We offer these bushes at feasible price to our clients.
Chemical Composition
|
Copper Alloys |
CU |
SN |
PB |
ZN |
FE |
NI |
AL |
MN |
SI |
Impurities |
|---|---|---|---|---|---|---|---|---|---|---|
|
AB-1(Standard: BS 1400 ) |
Rem |
0.1 |
0.05 |
0.5 |
1.5-3.5 |
1 |
8.5-10.5 |
1 |
0.25 |
0.3 |
|
AB-2 (Standard: BS 1400 ) |
Rem |
0.1 |
0.05 |
0.5 |
4- 5.5 |
4- 5.5 |
8.8- 10 |
1.5 |
1 |
0.3 |
|
AB-3( Standard: BS 1400 ) |
Rem |
0.1 |
0.03 |
0.4 |
0.5-0.7 |
0.1 |
6- 6.4 |
0.5 |
2 -2.4 |
0.8 |
|
ALBC-1 (Standard: JIS) |
85-90 |
0.1 |
0.1 |
0.5 |
1- 3 |
0.1- 1 |
8 -10 |
0.1- 1 |
0.1- 1 |
|
|
ALBC-2 (Standard: JIS) |
80-88 |
0.1 |
0.1 |
0.5 |
2.5- 5 |
1 -3 |
8 -10.5 |
0.1-1.5 |
|
|
|
ALBC-3 (Standard: JIS) |
78-85 |
0.1 |
0.1 |
0.5 |
3- 6 |
3- 6 |
8.5-10.5 |
0.1-1.5 |
|
|
|
ALBC-4 (Standard: JIS) |
71-84 |
0.1 |
0.1 |
0.5 |
2- 5 |
1- 4 |
6 -9 |
7 -15 |
|
|
|
C95400 (Standard:ASTM ) |
83 Min |
0.1 |
0.03 |
0.1 |
3 - 5 |
1.5 |
10 - 11.5 |
0.5 |
|
|
|
C95500 (Standard:ASTM ) |
78 Min |
0.1 |
0.03 |
0.1 |
3 -5 |
3- 5.5 |
10 - 11.5 |
3.5 |
|
|
|
C95800 (Standard:ASTM ) |
78 Min |
0.1 |
0.03 |
0.1 |
3.5-4.5 |
4 -5 |
8.5-9.5 |
0.8-1.5 |
0.1 |
|
|
G-CuAl10Fe (Standard: DIN ) |
83-89 |
0.2 |
0.1 |
0.4 |
2- 3.8 |
2.7 |
8.7-10.7 |
0.8 |
0.1 |
1 |
|
G-CuAl9Ni (Standard: DIN ) |
82-86.5 |
0.2 |
0.1 |
0.2 |
1- 2.8 |
1.5-3.8 |
8.7-9.8 |
2.3 |
0.07 |
0.8 |
|
G-CuAl10Ni (Standard: DIN ) |
76-80.5 |
0.1 |
0.03 |
0.2 |
3.5-5.3 |
4.5-6.3 |
9- 10.6 |
2.3 |
0.07 |
0.8 |
|
G-CuAl11Ni (Standard: DIN ) |
72-77 |
0.1 |
0.03 |
0.2 |
4.3-5.8 |
5.3-6.8 |
9.3-11.3 |
2.3 |
0.07 |
0.8 |
We are the manufacturer of Gunmetal Bushes. We feel immense to introduce ourselves as a leading manufacturer of a wide range of Gun Metal Bushes. The offered product is precisely developed from the latest technology & best quality of material, in conformity with set industrial standards. This range is suitable for general casting, which makes it ideal to be used in various engines and machines. Our offered product can be availed from us in various specifications as per the customer’s requirements. With our years of experience and knowledge, we are engaged in offering a premium quality Gun Metal Bushes. This product is designed with quality approved material & advance techniques in fulfilment with set industrial norms. Offered product is accessible in various specifications as per with the customer’s requirements. Clientele can avail this product from us at nominal rates from us.
Chemical Composition
| Copper Alloys | CU | SN | PB | ZN | FE | NI | P | AL | SI | SB | S | BI | Impurities |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LTB-1 (Standard: IS: 318-1981) | Rem. | 6-8 | 2.5-3.5 | 1.5-3 | 0.3 | 2 | 0.01 | 0.01 | 0.3 | 0.7 | |||
| LTB-2 (Standard: IS: 318-1981) | Rem. | 4-6 | 4-6 | 4-6 | 0.35 | 2 | 0.01 | 0.02 | 0.4 | 0.8 | |||
| LG-1 (Standard: BS 1400) | Rem. | 2-3.5 | 4-6 | 7-9.5 | 0.5 | 2 | 0.03 | 0.01 | 0.02 | 0.25 | 0.08 | 0.1 | 1 |
| LG-2 (Standard: BS 1400 | Rem | 4-6 | 4-6 | 4-6 | 0.5 | 2 | 0.01 | 0.02 | 0.05 | 0.8 | |||
| LG-4 (Standard: BS 1400) | Rem. | 6-8.05 | 2.5-3.5 | 1.5-3 | 0.2 | 2 | 0.01 | 0.01 | 0.25 | 0.05 | 0.7 | ||
| RG-5 (Standard: DIN) | 84-86 | 4-6 | 4-6 | 4-6 | 0.2 | 2 | 0.03 | 0.01 | 0.01 | 0.25 | 0.06 | ||
| RG-7 (Standard: DIN) | 83-85 | 6.8-8 | 5.3-7 | 3.3-5 | 0.2 | 1-1.5 | 0.03 | 0.01 | 0.01 | 0.25 | 0.03 | ||
| BC-1 (Standard: JIS) | 79-83 | 2 - 4 | 3-7 | 8-12 | 0.35 | 1 | 0.05 | 0.01 | 0.01 | 0.2 | |||
| BC-2 (Standard: JIS) | 86-90 | 7 - 9 | 0-1 | 3 - 5 | 0.2 | 1 | 0.05 | 0.01 | 0.01 | 0.2 | |||
| BC-6 (Standard: JIS) | 83 - 87 | 4 - 6 | 4 - 6 | 4 - 6 | 0.3 | 1 | 0.05 | 0.01 | 0.01 | 0.2 | |||
| BC-7 (Standard: JIS) | 86-90 | 5 - 7 | 1-3 | 3-5 | 0.2 | 1 | 0.05 | 0.01 | 0.01 | 0.2 | |||
| C83600 (Standard: ASTM) | 84 - 86 | 4.3 - 6 | 4 - 5.7 | 4.3 - 6 | 0.25 | 1 | 0.05 | 0.005 | 0.005 | 0.25 | 0.08 | ||
| C84400 (Standard: ASTM) | 79 - 82 | 2.5-3.5 | 6-8 | 7-10 | 0.4 | 0.8 | 0.02 | 0.02 | 0.005 | 0.25 | 0.08 |
