Write a Review
Our Products
Our Complete range of products are Iron Ore Fines, Iron Ore Lumps, Manganese Ore Lumps, Manganese Ore Fines and Nickel Ore.
| Iron Ore Fines | ||
| Specification: (Low Grade Range) | ||
| Fe | 63.5%min | 58 - 62% |
| (Rejection below 62%) | ||
| AL2O3 | 3.50 - 4.00 %max | 4.00 - 6.00 %max |
| SiO2 | 3.50 - 4.00%max | 4.00 - 6.00 %max |
| P | 0.06%max | 0.06 - 0.08 %max |
| S | 0.02%max | 0.02 - 0.04%max |
| Free Moisture loss | ||
| at 105 C | 8.00%max | 8.00%max |
| Physical Composition: | ||
| 10mm | 90%min | 90%min |
| 10mm | 10%max | 10%max |
| Below 0.15mm | 40%max | 40%max |
| Iron Ore Lumps | ||
| Specification: | ||
| Fe | 63.5%min. |
| (Rejection below 62%) | |
| SiO2 | 3.00%max |
| AL203 | 3.00%max |
| P | 0.06%max |
| S | 0.02%max |
| Moisture | 8.00%max |
| Physical Specification: | |
| 10-40mm/10-80mm |
| Specification: |
| Cr2O3 | 36% min, 38% basis | 32% min, 34% basis |
| Al2O3 | 18% max | 20% max |
| FeO | 13-15% max | 13-15% max |
| MnO | 0.16% max | 0.16% max |
| SiO2 | 6% max | 8% max |
| Mgo | 16-18% | 16-18% |
| Cr:Fe | 2.5:1% min | 2.2:1% min |
| P | <0.02% max | <0.02% max |
| Moisture | <0.1% max | <0.1% max |
| Physical Size | 10 - 300mm | 10 - 300mm |
| Cr2O3 | 50%basis 48%min | 56%basis 54%min | 60%basis 58%min |
| Al2O3 | 12% max | 12% max | 12% max |
| SiO2 | 7% max | 1% max | 1% max |
| MgO | 14% max | 14% max | 14% max |
| P | 0.007% max | 0.007% max | 0.007% max |
| S | 0.03% max | 0.03% max | 0.03% max |
| Cr | Fe ratio: 2.5:1 min | Fe ratio: 3.0:1 min | Fe ratio: 3.5:1 min |
| Moisture | 8% max | 8% max | 8% max |
| Size | 0 - 4mm 90% min | 0 - 1mm 90% min | 0 - 1mm 90% min |
| Mn | 40-45% basis |
| Fe | 2%max |
| P | 0.05%max |
| SiO2 | 0.05%max |
| MgO | 4%max |
| Al2O3 | 1%max |
| Size | 20mm-75mm/75mm-150mm |
| Moisture | 5-8% max |
| MN | 32-40% basis |
| Al2O3 | 4%max |
| Sio2 | 22-24%max |
| Fe2O3 | 10%max |
| MnO2 | 50%max |
| MgO | 2%max |
| CaO | 2%max |
| P | 0.02%max |
| S | 0.05%max |
| Moisture | 10-15% max |
| Size | 0-10mm (90%min) |
| Specification: |
| Lead (pb) | 60% Basis , 55% min |
| Fe2O3 | 0.20%max |
| CaO | 0.05%max |
| MnO | 0.05%max |
| MgO | 0.05%max |
| ZnO | 0.1%max |
| Sulpher | 8.50%max |
| Arsenic (As) | 0.50%max |
| Mercury (Hg) | 0.30%max |
| Size | 10-300mm(70%min) |
| Specification: |
| Si | 70%, 72%, 75% min basis |
| C | 0.10 - 0.20% max |
| S | 0.05% max |
| P | 0.05% max |
| Al | 1.25%max - 2.0% max |
| Size | 10 - 50 mm, or as required |
| Specification: |
| Cr | 60 - 65% basis |
| Si | 2.5% - 4% max |
| C | 6 -8% max |
| P | 0.3% - 0.05% max |
| S | 0.05% max |
| Specification: |
| Cr | 60 - 65% basis |
| C | 0.1% max |
| Si | 1.5% max |
| P | 0.05% max |
| S | 0.05% max |
| Specification: |
| Mn | 70 - 75% & 75 - 80% |
| C | 6% - 8% max |
| Si | 1.5% max |
| P | 0.35% max |
| S | 0.05% max |
| B | 20% min |
| C | 0.5% max |
| Si | 2% max |
| P | 0.05% max |
| S | 0.05% max |
| Size | 10 - 50 mm |
| Specification: |
| Si | 98.5% min |
| Fe | 0.5% max |
| AL | 0.5% max |
| Ca | 0.3% max |
| Size | 10 - 100mm |
| Specification: |
| Si | 99.0% min |
| Fe | 0.40% max |
| AL | 0.40% max |
| Ca | 0.01% max |
| Size | 10 - 100mm |
| Specification: |
| Si | 99.0% min |
| Fe | 0.30% max |
| Al | 0.30% max |
| Ca | 0.03% max |
| C | 0.025% max |
| Size | 10 - 100mm |
| Specification: |
| Mn | 99.7% min |
| C | 0.04% max |
| S | 0.05% max |
| P | 0.005% max |
| FE + SI + SE | 0.205% max |
| Specification: |
| GCV (ADB) | 6500 +/- 100 K.Cal./Kg. |
| Fixed Carbon | By difference |
| Ash Content (ADB) | 13 [+/-1]% |
| Inherent Moisture (ADB) | 2 to 3 % |
| Total Moisture (ARB) | 8% |
| Volatile Matter (ADB) | 24-28 % |
| Total Sulphure (ADB)S | <0.8% |
| Size /Sieve | 0 to 50 mm. |
Sagar Gandhi (Solitaire Imports & Exports)
I, Christmas Eve 4th Floor, Warden Road, Breach Candy, Mumbai- 26., Maharashtra, India
Share us via
