What is Integral Waterproofing ?Integral waterproofing goes inside the concrete. Waterproofing memrance has a number of issues. It can be expensive, time-consuming, and easy to damage. Most membrances are made using oil-based materials and are not sustainable. If they leak, it's not obvious who caused the problem and there can be a lot of finger-pointing. Followings are the features and benefit of integral waterproofing over membrane waterproofing.

Features & Benefits

• Corrosion resistance – Makes concrete more cohesive, hence protects steel from corrosion
• Compatibility – Being a liquid, easily dispersible & compatible with ncrete/mortar mixes.
• Permeability – it reduces the permeability of water into concrete.
• Strength – The setting time and compressive strength of the concrete remains within the specificaton limits
• Shrinkage – Reduces shrinkages crack developemnt in plaster & concrete.
• Workability – Improves workability of freshly mixed cement concrete.
• Durability – Increases durability by improving waterproofing of concrete.

Ultramax integral water proofing chemicals can be used in builidng constructions for

• Basements
• Roof slabs and screeds
• water tanks & water retaining structures
• External plastering
• Bathrooms and balconies
• Sumps and drains

DescriptionUltramax is a higly duty waterproofing admixture for concrete, mortars and any type of cementiation renders. It contains an inbuilt integral waterproofing agent, corrosion resistant chemical, together with a chemically active ingredient which reacts with the hydrated cement paste to form insoluble crytalline pore fillers. This combined action of ULTRAMAX makes the concrete totally sealed against penetration of water (or liquids).

SBR-AL is acrylic latex based white colored liquid integral waterproofing compund. It is used in concrete and mortar where high degree on waterproofing is needed. Components of SBR-AL reacts directly with the free lime released in the hydration process of the Portland cement resulting in a highly water repellant substance which is deposited through the concreate/cement matrix. The presence of this integrally contained compound resists and reverses the normal tendency of hardened concrete to absorb water by capillary action.

 

Uses

• For waterproofing of roof slabs, sunken slabs, basements, water tanks, sunshades etc. In combination with cement.
• As a bonding agent for uses in repair and plastering
• For making polymer mortar for repairs mortars etc.
• Treatment for leaching and saltpeter action
• Multipurpose mortar admixture for injections grouts.

 

Features

• Reduces amount of mixing water.
• Increases plastic workability.
• Allows normal setting and curing
• Reduces shrinkage.
• Promotes increaed density.
• Minimized capillary water movement.
• Lowers permeability.
• Promotes high strenght
• Waterproofs integrally.

 

Packing

• SBR-AL is available in 1, 2, 5, 10, 20 ltr and 100 ltr containers.

 

Shelf Life

• SBR-AL has a shelf life of 12 months from the date of manufacture.

 

other products categories available.

A liquid water reducing agent these admixtures slow the rate of cement hydration. Preventing th cement from setting before it can be placed and compacted. This type of admixture is mainly used in hot conditions and climates or on very large pours.

Use
RWR-323 is used as a general purpose admixture where the placing conditions for high quality concrete are more demanding such as :

• Elevated Temperatures.
• Fair Faced Concrete.
• Pumped Concrete.
• Ready Mix Concrere.
• Areas Where Large Volumes are placed in one pour.
• High Mechanical Strengths are Required.
• Long Travel Distance.

Advantages

• RWR-323 provides the following properties
• Longer Setting Time in Hot Weather.
• Improved workability without increased water content.
• Reduced water without loss of workability.
• Compatible with all types of cements

AppearanceDark Brown Colored Liquid

PackagingRWR-323 is available in 220 Litrer Non Returnable Drums.

Storage & Shelf LifeOne (1) year in unopened, original containers when stored free frost and below 25^oC.

DosageTypical dosage RWR-323 400ml/100kg cement. The dosage rate can be increased to 500ml/10 kg cement to overcome difficulties in quality of cement and aggregates, high temperature and difficult placing conditions. Higher dosages provide longer setting times. In many cases it is advisable to carry out trial mixes to establish the exact dosage rate requied RWR-323 is compatible with all typed of portland cement including s.r.c.

Appilication Conditions Instructions for useFor best results delay the dosage in to the water until the cement and RWR-323 have been added and intitially mixed with water. RWR-323 may be added to the mixed concrete if required. Howerver, frther mixing should take place for at least one minute per cubic metre of concrete.

Important NotesWhen accidental overdosing of normal setting RWR-323 occure the setting time will be retarded. During this period the concrete must be kept moist to prevent premature drying out.
Other products categories available.

EPT-031 is a superior quality Rapid Hardening Admixture. Ultracrete EPT-031 are an important component of concrete, together with the cement, water, aggregates EPT-031 are used to increase the initial rate and speed of the chemical reaction between cement and the mixing water. This results in a faster stiffening of the concrete (Water Reducing & Rapid Hardening Admixture) or faster hardening and strength development (hardening admixture) or both.This Environmental Product Declaration covers hardening admixture for normal concrete. Ultracrete EPT-031 specially developed for application in pre-cast concrete, high performance concrete and for manufacturing of cement tiles, paver blocks etc.

Ultracrete MR-D4 is an emulsifying agent to be mixed with diesel to obtain a mould release agent.

UsesUltracrete MR-D4 when mixed with diesel functions like a mould release agent and it can be applied to all types of shutters, moulds, steel, timber, plywood, plastic and rubber moulds.

Application InstructionsJust mix Ultracrete MR-D4 in diesel in the proportion of 1 ltr MR-D4 to 40 ltrs of diesel. The concentrate can be directly added to the drum containing diesel close to the lid and rolled over to obtain uniformity in mixing. The mixed material is ready to be used as a mould release agent.

Properties

• Form : Straw coloured Liquid
• Specific Gravity : 0.80 to 0.85 at 27^oC

CoverageMR-D4 when mixed with 40 ltr of diesel covers an area of 25 to 50M2/litre when spray applied. On  new steel shutters the coverage is about 50M2/litre. In case of plywood and metal shutters better coverage results are obtained by progressive use. When brush applied less coverage is obtained because of evaporation losses.

Packing

• Ultracrete MR-D4 is available in 20 ltr and 100 ltr containers.

Shelf Life

• MR-D4 has a shelf life of 24 months from the date of manufacture if stored in a cool dry place in original packing.

Health and Safety Instructions

• MR-D4 is non toxic and safe.

DisclaimerUltramax warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warrenty can be given as to the results of use because conditions of use, such as site conditions, surface prepartions, workmanship, weather, stuctural issues and other factors are beyond the control of Ultramax. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitablity of products for their intended purpose prior to full scale usage of Ultramax products and assumes all risks. The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser's sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of erchantability or fitness for a particular purpose. Ultramax shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results. The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We resserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.
Other Products catagories available.

Ultracrete MR-SB is ca chemical release agent suitable for shutters and moulds. Clean release given a fair faced concrete surface. Ultracrete MR-SB reacts chemically with cement in such a manner that excellent release properties are imparted to the treated face of the shutters and moulds. Concrete casted with Ultracrete MR-SB on the shutters have smooth, hard uniform and light coloured finish. The adhesion of subsequent finishes such as renders, paints or textures coating is unaffected by use of Ultracrete MR-SB

UsesUltracrete MR-SB is suitable for all types of shutters and moulds. MR-SB can be applied to steel, timber plywood, plastic and rubber moulds.

AdvantagesUltracrete MR-SB gives very good shutter releasing properties. Other oils used in similar application penetrate into the concrete and interfere with the strength of the member. Apart from this they leave ugly stains on the concrete surface. Before subsequent finishes one needs to chemically or mechanically remove these stains and leftovers of these oils. Ultracrete MR-SB is designed keeping all these problems in mind and to ensure least damages to the shutters and to the concrete. Application of conventional mould releasing oils is redious and time consuming. Ultracrete MR-SB can be sprayed saving time and labour.

Directions for useWhen using for the first time spray Ultracrete MR-SB on the shutters while erecting them and just before concreting. Thereafter Ultracrete MR-SB can be sprayed just after deshuttering and cleaning. During initial uses new commercial ply shutters tend to be absorptive. Hence it is necessary that new ply shutters are sprayed just before concreting also.

CoverageUltracrete MR-SB covers 25 to 50 m2/litre when spray applied. On new steel shutters teh coverage is about 50m2/litre. In case of plywood as well as metal shutters better converage results are obtained by progressive use of Ultracrete MR-SB. When brush applied less coverage is obtained because of evaporation losses.

PackingUltracrete MR-SB is available in 225 ltr containers.

Shelf LifeUltracrete MR-SB has a shelf life of 24 months from the date of manufacture if stored in a cool dry place in original packing.

Health and Safety Instructions

• Ultracrete MR-SB is non toxic and safe.

DisclaimerUltramax warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use becasue conditions of use, such as site conditons, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of Ultramas. Purchaser agrees to seek teh advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of Ultramax products and assumes all risks. The company does not assume any liability for unsatisfactory result, arising from the use of our products. Purchaser's sole liability is limited to replacement to product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply inculding any warranty of erchantability of fitness for a particular purpose. Ultramax shall not be liable for any consequential  damages arising from the use of our products for unsatisfactory results. The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. Wer reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.
Other products catagories available.

Ultracrete MR-W is supplied as a pale amber liquid which turns white diluted with water to produce a chemical release agent, combining the outstanding release properties of such materials with the economy of conventional oil. It reacts with the alkali in the concrete to form a thin water repellent skin on the surface of the mould which enables easy stripping from the hardened concrete.

Advantages :

• Non-staining : No cleaning of unsightly oil stains if plastering is not reuired.
• High quality : It produces fair faced finish concrete.
• Versatile : It can be used on all types of moulds.
• Minimises cleaning : It makes cleaning of form faces between pours very easy.
• Concentrate form : It reduces storage and transport costs.
• Water based : It only requires water for dilution.
• Corrosion inhibitor : It aids corrosion inhibition.

Application Instructions

• Check whether mould surfaces are really clean before re-use?
• Is a fresh coat of Ultracrete MR-W appliced before each re-use?
• Has the Ultracrete MR-W been diluted exactly 1:6 with water by volume?
• Check whether the coverage rate is the highest and film thickness the lowest possible?
• Is the coat really dry before placing the concrete?
• Is the de-moulding time 24 hours or more?

Properties

• Dilution rate – 1 part Ultracrete MR-W to be diluted with 6 parts clear water (by volume)
• Formwork surfaces – May be used on wooden or metal surfaces.
• Non-staining – Can be used safely with white cement
• Specific Gravity – 0.96 at 25^oC.

Coverage

• 1 litre of Ultracrete MR-W when diluted with 6 litres of water will cover 80 to 180m2 depending upon the nature of the substrate.
• Unsealed timber or plywood – 80 to 115 m2/7 litres of solution.

Packing

• Ultracrete MR-W is available in 20 ltr and 100 ltr containers.

Shelf Life

• Ultracrete MR-W has a shelf life of 24 months provided the temperature is kept in the range of 5^oC-40^oC.

Health and Safety InstructionsGloves should be worn when handling Ultracrete MR-W Splashes on skin should be removed with soap and water. Contact with eyes should be avoided and accidental contamination should be washed with plenty of water and medical treatment sought immediately. If swallowed, obtain immediate aid. Do not induce. Ensure good ventilation.

DisclaimerUltramax warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective techincal data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beond the control of suitability of products for their intended purpose prior to full scale usage of Ultramas products and assumes all risks. The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser's sloe liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply inluding any warranty of erchantability or fitness for a particular results. The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within scope of technical progress or new developments.
Other product catagories available.

What is Integral Waterproofing ?Integral waterproofing goes inside the concrete. Waterproofing memrance has a number of issues. It can be expensive, time-consuming, and easy to damage. Most membrances are made using oil-based materials and are not sustainable. If they leak, it's not obvious who caused the problem and there can be a lot of finger-pointing. Followings are the features and benefit of integral waterproofing over membrane waterproofing.

Features & Benefits

• Corrosion resistance – Makes concrete more cohesive, hence protects steel from corrosion
• Compatibility – Being a liquid, easily dispersible & compatible with ncrete/mortar mixes.
• Permeability – it reduces the permeability of water into concrete.
• Strength – The setting time and compressive strength of the concrete remains within the specificaton limits
• Shrinkage – Reduces shrinkages crack developemnt in plaster & concrete.
• Workability – Improves workability of freshly mixed cement concrete.
• Durability – Increases durability by improving waterproofing of concrete.

Ultramax integral water proofing chemicals can be used in builidng constructions for

• Basements
• Roof slabs and screeds
• water tanks & water retaining structures
• External plastering
• Bathrooms and balconies
• Sumps and drains

DescriptionUltramax is a higly duty waterproofing admixture for concrete, mortars and any type of cementiation renders. It contains an inbuilt integral waterproofing agent, corrosion resistant chemical, together with a chemically active ingredient which reacts with the hydrated cement paste to form insoluble crytalline pore fillers. This combined action of ULTRAMAX makes the concrete totally sealed against penetration of water (or liquids).

SBR-AL is acrylic latex based white colored liquid integral waterproofing compund. It is used in concrete and mortar where high degree on waterproofing is needed. Components of SBR-AL reacts directly with the free lime released in the hydration process of the Portland cement resulting in a highly water repellant substance which is deposited through the concreate/cement matrix. The presence of this integrally contained compound resists and reverses the normal tendency of hardened concrete to absorb water by capillary action.

 

Uses

• For waterproofing of roof slabs, sunken slabs, basements, water tanks, sunshades etc. In combination with cement.
• As a bonding agent for uses in repair and plastering
• For making polymer mortar for repairs mortars etc.
• Treatment for leaching and saltpeter action
• Multipurpose mortar admixture for injections grouts.

 

Features

• Reduces amount of mixing water.
• Increases plastic workability.
• Allows normal setting and curing
• Reduces shrinkage.
• Promotes increaed density.
• Minimized capillary water movement.
• Lowers permeability.
• Promotes high strenght
• Waterproofs integrally.

 

Packing

• SBR-AL is available in 1, 2, 5, 10, 20 ltr and 100 ltr containers.

 

Shelf Life

• SBR-AL has a shelf life of 12 months from the date of manufacture.

 

other products categories available.

A liquid water reducing agent these admixtures slow the rate of cement hydration. Preventing th cement from setting before it can be placed and compacted. This type of admixture is mainly used in hot conditions and climates or on very large pours.

Use
RWR-323 is used as a general purpose admixture where the placing conditions for high quality concrete are more demanding such as :

• Elevated Temperatures.
• Fair Faced Concrete.
• Pumped Concrete.
• Ready Mix Concrere.
• Areas Where Large Volumes are placed in one pour.
• High Mechanical Strengths are Required.
• Long Travel Distance.

Advantages

• RWR-323 provides the following properties
• Longer Setting Time in Hot Weather.
• Improved workability without increased water content.
• Reduced water without loss of workability.
• Compatible with all types of cements

AppearanceDark Brown Colored Liquid

PackagingRWR-323 is available in 220 Litrer Non Returnable Drums.

Storage & Shelf LifeOne (1) year in unopened, original containers when stored free frost and below 25^oC.

DosageTypical dosage RWR-323 400ml/100kg cement. The dosage rate can be increased to 500ml/10 kg cement to overcome difficulties in quality of cement and aggregates, high temperature and difficult placing conditions. Higher dosages provide longer setting times. In many cases it is advisable to carry out trial mixes to establish the exact dosage rate requied RWR-323 is compatible with all typed of portland cement including s.r.c.

Appilication Conditions Instructions for useFor best results delay the dosage in to the water until the cement and RWR-323 have been added and intitially mixed with water. RWR-323 may be added to the mixed concrete if required. Howerver, frther mixing should take place for at least one minute per cubic metre of concrete.

Important NotesWhen accidental overdosing of normal setting RWR-323 occure the setting time will be retarded. During this period the concrete must be kept moist to prevent premature drying out.
Other products categories available.

EPT-031 is a superior quality Rapid Hardening Admixture. Ultracrete EPT-031 are an important component of concrete, together with the cement, water, aggregates EPT-031 are used to increase the initial rate and speed of the chemical reaction between cement and the mixing water. This results in a faster stiffening of the concrete (Water Reducing & Rapid Hardening Admixture) or faster hardening and strength development (hardening admixture) or both.This Environmental Product Declaration covers hardening admixture for normal concrete. Ultracrete EPT-031 specially developed for application in pre-cast concrete, high performance concrete and for manufacturing of cement tiles, paver blocks etc.

Ultracrete MR-D4 is an emulsifying agent to be mixed with diesel to obtain a mould release agent.

UsesUltracrete MR-D4 when mixed with diesel functions like a mould release agent and it can be applied to all types of shutters, moulds, steel, timber, plywood, plastic and rubber moulds.

Application InstructionsJust mix Ultracrete MR-D4 in diesel in the proportion of 1 ltr MR-D4 to 40 ltrs of diesel. The concentrate can be directly added to the drum containing diesel close to the lid and rolled over to obtain uniformity in mixing. The mixed material is ready to be used as a mould release agent.

Properties

• Form : Straw coloured Liquid
• Specific Gravity : 0.80 to 0.85 at 27^oC

CoverageMR-D4 when mixed with 40 ltr of diesel covers an area of 25 to 50M2/litre when spray applied. On  new steel shutters the coverage is about 50M2/litre. In case of plywood and metal shutters better coverage results are obtained by progressive use. When brush applied less coverage is obtained because of evaporation losses.

Packing

• Ultracrete MR-D4 is available in 20 ltr and 100 ltr containers.

Shelf Life

• MR-D4 has a shelf life of 24 months from the date of manufacture if stored in a cool dry place in original packing.

Health and Safety Instructions

• MR-D4 is non toxic and safe.

DisclaimerUltramax warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warrenty can be given as to the results of use because conditions of use, such as site conditions, surface prepartions, workmanship, weather, stuctural issues and other factors are beyond the control of Ultramax. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitablity of products for their intended purpose prior to full scale usage of Ultramax products and assumes all risks. The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser's sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of erchantability or fitness for a particular purpose. Ultramax shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results. The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We resserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.
Other Products catagories available.

Ultracrete MR-SB is ca chemical release agent suitable for shutters and moulds. Clean release given a fair faced concrete surface. Ultracrete MR-SB reacts chemically with cement in such a manner that excellent release properties are imparted to the treated face of the shutters and moulds. Concrete casted with Ultracrete MR-SB on the shutters have smooth, hard uniform and light coloured finish. The adhesion of subsequent finishes such as renders, paints or textures coating is unaffected by use of Ultracrete MR-SB

UsesUltracrete MR-SB is suitable for all types of shutters and moulds. MR-SB can be applied to steel, timber plywood, plastic and rubber moulds.

AdvantagesUltracrete MR-SB gives very good shutter releasing properties. Other oils used in similar application penetrate into the concrete and interfere with the strength of the member. Apart from this they leave ugly stains on the concrete surface. Before subsequent finishes one needs to chemically or mechanically remove these stains and leftovers of these oils. Ultracrete MR-SB is designed keeping all these problems in mind and to ensure least damages to the shutters and to the concrete. Application of conventional mould releasing oils is redious and time consuming. Ultracrete MR-SB can be sprayed saving time and labour.

Directions for useWhen using for the first time spray Ultracrete MR-SB on the shutters while erecting them and just before concreting. Thereafter Ultracrete MR-SB can be sprayed just after deshuttering and cleaning. During initial uses new commercial ply shutters tend to be absorptive. Hence it is necessary that new ply shutters are sprayed just before concreting also.

CoverageUltracrete MR-SB covers 25 to 50 m2/litre when spray applied. On new steel shutters teh coverage is about 50m2/litre. In case of plywood as well as metal shutters better converage results are obtained by progressive use of Ultracrete MR-SB. When brush applied less coverage is obtained because of evaporation losses.

PackingUltracrete MR-SB is available in 225 ltr containers.

Shelf LifeUltracrete MR-SB has a shelf life of 24 months from the date of manufacture if stored in a cool dry place in original packing.

Health and Safety Instructions

• Ultracrete MR-SB is non toxic and safe.

DisclaimerUltramax warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use becasue conditions of use, such as site conditons, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of Ultramas. Purchaser agrees to seek teh advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of Ultramax products and assumes all risks. The company does not assume any liability for unsatisfactory result, arising from the use of our products. Purchaser's sole liability is limited to replacement to product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply inculding any warranty of erchantability of fitness for a particular purpose. Ultramax shall not be liable for any consequential  damages arising from the use of our products for unsatisfactory results. The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. Wer reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.
Other products catagories available.

Ultracrete MR-W is supplied as a pale amber liquid which turns white diluted with water to produce a chemical release agent, combining the outstanding release properties of such materials with the economy of conventional oil. It reacts with the alkali in the concrete to form a thin water repellent skin on the surface of the mould which enables easy stripping from the hardened concrete.

Advantages :

• Non-staining : No cleaning of unsightly oil stains if plastering is not reuired.
• High quality : It produces fair faced finish concrete.
• Versatile : It can be used on all types of moulds.
• Minimises cleaning : It makes cleaning of form faces between pours very easy.
• Concentrate form : It reduces storage and transport costs.
• Water based : It only requires water for dilution.
• Corrosion inhibitor : It aids corrosion inhibition.

Application Instructions

• Check whether mould surfaces are really clean before re-use?
• Is a fresh coat of Ultracrete MR-W appliced before each re-use?
• Has the Ultracrete MR-W been diluted exactly 1:6 with water by volume?
• Check whether the coverage rate is the highest and film thickness the lowest possible?
• Is the coat really dry before placing the concrete?
• Is the de-moulding time 24 hours or more?

Properties

• Dilution rate – 1 part Ultracrete MR-W to be diluted with 6 parts clear water (by volume)
• Formwork surfaces – May be used on wooden or metal surfaces.
• Non-staining – Can be used safely with white cement
• Specific Gravity – 0.96 at 25^oC.

Coverage

• 1 litre of Ultracrete MR-W when diluted with 6 litres of water will cover 80 to 180m2 depending upon the nature of the substrate.
• Unsealed timber or plywood – 80 to 115 m2/7 litres of solution.

Packing

• Ultracrete MR-W is available in 20 ltr and 100 ltr containers.

Shelf Life

• Ultracrete MR-W has a shelf life of 24 months provided the temperature is kept in the range of 5^oC-40^oC.

Health and Safety InstructionsGloves should be worn when handling Ultracrete MR-W Splashes on skin should be removed with soap and water. Contact with eyes should be avoided and accidental contamination should be washed with plenty of water and medical treatment sought immediately. If swallowed, obtain immediate aid. Do not induce. Ensure good ventilation.

DisclaimerUltramax warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective techincal data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beond the control of suitability of products for their intended purpose prior to full scale usage of Ultramas products and assumes all risks. The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser's sloe liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply inluding any warranty of erchantability or fitness for a particular results. The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within scope of technical progress or new developments.
Other product catagories available.