Our Products
Outdoor Speaker
2 Products availableAudio Recorder
2 Products availableWoofer
2 Products availableOur product range contains a wide range of Conference System, Horn Tweeters and Wireless Camera Transmitter
CS-120CUworks as a main unit of the whole system. It provides all inputs and outputs needed to manage complex audio system. A singleCS-120CUcan be connected with 90 sets of CS-120CH and CS-120DU. With additional power unit CS-120EMU up to 256 sets can be connected.
This stand-alone system provides 4 types of conferencing mode, Open, Over-ride, Voice and Apply. It meets most conference requirement. Voting function is also provided. Large LCD screen provides detailed information. Soft-key design provides intuitive operation Maximum 4 video cameras can be connected to perform video tracking.
CS-120CH (Digital Chairman Unit)TheCS-120CHhas extra functions besides those CS-120DU has. There is a priority key which can either mute or turn off all delegate units, or cancel all applying. The chairman unit has the right to accept or refuse applying. Voting function can be initiated only the chairman unit. The timing is also controlled by the chairman. Voting result shown on all units will be clear. In one installation only oneCS-120CHchairman unit can be connected.
CS-120DU (Digital Delegate Unit)TheCS-120DUis the basic delegate unit. Under the control ofCS-120CUthere are 4 types of operation mode. 3 key voting function is available. Voting result can be read on the LCD screen.There are two lengths of detachable gooseneck microphone and three types of capsules for choices to meet various requirements. 3.5 mm earphone output and microphone input phone jack are provided.
| Supply voltage | AC110Vor AC220V (default settings) |
| Number of connectable conference units | ≤254 |
| Frequency response | 40-16000Hz |
| Signal-to-noise ratio | >80dBA |
| Dynamic range | >85dB |
| Audio crosstalk | >70dB |
| Total harmonic distortion | <0.05% Original input: 6.3 mm balanced Signal strength: 0.775 V |
| Audio inputs | Recording input: RCA type*1 Original output: RCA*2 balanced, XLR*1 balanced |
| Audio outputs | Recording output: RCA type*1 |
| SD card slot | Support 32GB SD card in FAT format |
| LAN interface | RJ45 , or PC control |
| Conference unit connector | DIN7P |
| Maximum power consumption | 200W |
The P.AudioPHT-404Pis an integrated high frequency horn and compression driver. The design yields very extended high frequency response and controlled directivity in a rectangular geometry. The rated coverage pattern is 100 degree horizontal by 60 degree vertical. This rated coverage pattern is ideal for short throw applications such as foreground and background music system designs found in restaurants, pubs, and retail environments. ThePHT-404Phas a rated bandwidth of 3kHz to beyond 16kHz. This frequency response range makes the system excellent for wide coverage upper midrange and high frequency operation. ThePHT-404Pis ideally mated with a 10 inch, or 8 inch low frequency loudspeaker in a two way design.
ThePHT-404Pfeatures a 1 inch diameter (25.4mm) phenolic based diaphragm assembly. The small format (1 inch) diaphragm is ideal for maintaining piston range performance in the upper frequency range. The wide horizontal mouth (10.6 inches, 269mm) maintains very good horizontal coverage control. The high sensitivity of 105 dB (1 watt at 1 meter) allows thePHT-404Pto be used in medium sized venues. The horn is made of a rugged glass filed ABS plastic resin and the critical compression driver components are all controlled by P.Audios advanced quality and manufacturing systems.
| Diaphragm Diameter | 1.0 inch (25.4mm) |
| Nominal Impedance | 8Ω |
| Voice Coil DC Resistance | 7.2Ω |
| Power Handling | 20 Watt |
| Sound Pressure Level (1W@1M) | 105 dB |
| Magnet | Ferrite |
| Diaphragm Material | Phenolic Resin |
| Horn Material | A.B.S With Glass Filled Black Polycarbonate |
| Nominal Coverage Angle (H x V) -6 dB | 100° x 60° |
| Cutoff frequency | 3 kHz |
| Baffle Cutout Dimension | 85mm x 245mm 3.35" x 9.65" |
| Net Weight | 0.98kg (2.15 lbs) |
| Shipping Weight | 1.16kg (2.55 lbs) |
The KA-10 system includes KA-10R, KA-10T (KA-8TH), KAC50X / KAC150 cable, TG-10CH2, shoe mount adapter, and CM-201 microphone. It is designed for both professional and consumer video camera. The CM-201 provides omni-directional pick up pattern to expand the coverage to mike a meeting.
Lithium battery can goes for 14 hours which is useful for travel.
UHF PLL 16 selectable frequency can render multi system application.
Over 60 meter operation distance virtually meets all kinds of application.
| Internal Microphone | Omni-directional Condenser Microphone |
| Frequency Preparation | PLL Synthesized Control |
| Carrier Frequency Range | 502~960 MHz |
| RF Outputs | 10mW |
| Stability | ±10kHz |
| Frequency Deviation | ±48kHz |
| LED Display | Channel |
| Controls | Power On/Off, Channel selection, Volume control |
| Spurious Emissions | <-50 dBC |
| Audio Frequency Response | 40~18,000 Hz |
| Microphone input connector | 1/8” Mono Phone Jack |
| Battery life | 14 hours typical |
| Battery | Lithium cell (3.7V, 1300mAh) |
| Dimension (mm) | 54mm(W)* 17mm(D)* 99mm(H) |