Post Buy Requirement
SE
Hyderabad, Telangana, India
Add Review

Transformers #376435

Power Transformer

We supply high quality Power Transformer appropriate for three phases, 50/60 c/s power frequency. Our power transformers are extremely perfect for both outdoor and indoor applications. We fabricate transformers as per the is 1180 & 2026 standards.
Ranges
double wound transformerssingle & three phase 50 / 60 c/s upto 2 mva )inductive reactors auto wound transformers dry type transformers furnace transformers impedance transformers
test conducted as per is standards
measurement of insulation strength measurement of resistance / windingturns ratio on all tap positionsmeasurement of impedance / load loss impulse test withst and test induced over voltage withstand testtemperature rise test
features
three winding transformers in customized designs high quality insulating material used such as polyester, fiber, paper, board, glass tape, etc.extra tappings available tank constructed from mild steel surfaces coated with epoxy based paints
applications
railways construction industry engineering industry.

Technical Specifications

VoltageUp to 11 KV on both primary & secondary
RatingStandard ratings available in 25, 50, 75, 100, 160, 200, 315, 400, 630, and 1000 KVA
CoreMade from premium quality of CRGO steel for low losses
WindingsMade of rectangular or round paper covered in copper conductor with varnish as per IS 7404 (Part I & II).
Range25 KVA to 2 MVA with primary & secondary voltages
InsulationWithstand 1.5 KV for LV windings and 17.5 KV for HV windings
Tappingsp/m 2.5%, p/m 5% tappings on HV windings
Vector Group41 DY 11 Vector Group available with other different groups like Yy0, Yy6, Dy5, Dy1 etc
Temperature RiseMaximum ambient of 40 degrees C top of Oil 50 degrees C
Load Loss & ImpedanceAdvised impedances for 315 KVA and below range from 2.8% to 4.44%.
Transformer OilInsulating oil having low viscosity liquid according to IS 335 & international standards
View Complete Details

Variable Voltage Auto Transformer

We are the manufacturer and supplier of Variable Voltage Auto Transformer which is a technologically advanced device supplies 0 to 270 volts voltage in single phase and 0 to 470 in three phases. Our transformers deliver continuous voltage without any fluctuation. This output is accomplished through turning the knob in less than a full circular rotation.
unit range
single phase unitthree phase unit
availability
enclosed motor driven open ministat soil cooled
technical specifications
capacity : 2amps, 4amps, 8amps, 10amps, 15amps, 28amps, 40amps, 50amps, 60amps, 100amps, 150amps and 200amps.
salient features
compact in sizeanti-corrosive resistant to heat withst and operational temperatureeconomical
ideal for
getting variable dc voltage for electroplating setsvarying the speed of dc motorsmanufacture of voltage stabilizer up to 600 k varegulate and control the temperature of furnaces and ovens developing high capacity floating rectifiers for telephone exchanges fabricating h.v. Test sets, meter test benches, oil test sets, etc.
View Complete Details

High Current Transformer

We are engaged in the manufacturing of High Current Transformers [current injection kits] that are uniquely designed to meet the requirements of various industries. Using optimum quality raw material, we have developed our Transformers in industry-specific shapes and sizes. It is suitable for all types of lab tests.
Salient Features
Rugged ConstructionLong Functional LifeResistant to corrosionCompetitive pricing
Rating :
Available from 1kA to 40kA
Ideal For
Switch gear testingEngineering IndustryTransformer plantsTest labs
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Uday & Shiv Shanka (South Eastern Equipment Co.)
  • 10/5 Ida Nacharam, Hyderabad, Telangana - 500076, India
  • Share us via
Retailer of Transformers from Hyderabad, Telangana by South Eastern Equipment Co.
Post Buy Requirement
SE
Hyderabad, Telangana, India
Add Review

Transformers #376435

Power Transformer

We supply high quality Power Transformer appropriate for three phases, 50/60 c/s power frequency. Our power transformers are extremely perfect for both outdoor and indoor applications. We fabricate transformers as per the is 1180 & 2026 standards. Rangesdouble wound transformerssingle & three phase 50 / 60 c/s upto 2 mva )inductive reactors auto wound transformers dry type transformers furnace transformers impedance transformerstest conducted as per is standardsmeasurement of insulation strength measurement of resistance / windingturns ratio on all tap positionsmeasurement of impedance / load loss impulse test withst and test induced over voltage withstand testtemperature rise testfeaturesthree winding transformers in customized designs high quality insulating material used such as polyester, fiber, paper, board, glass tape, etc.extra tappings available tank constructed from mild steel surfaces coated with epoxy based paintsapplicationsrailways construction industry engineering industry.

Technical Specifications

VoltageUp to 11 KV on both primary & secondary
RatingStandard ratings available in 25, 50, 75, 100, 160, 200, 315, 400, 630, and 1000 KVA
CoreMade from premium quality of CRGO steel for low losses
WindingsMade of rectangular or round paper covered in copper conductor with varnish as per IS 7404 (Part I & II).
Range25 KVA to 2 MVA with primary & secondary voltages
InsulationWithstand 1.5 KV for LV windings and 17.5 KV for HV windings
Tappingsp/m 2.5%, p/m 5% tappings on HV windings
Vector Group41 DY 11 Vector Group available with other different groups like Yy0, Yy6, Dy5, Dy1 etc
Temperature RiseMaximum ambient of 40 degrees C top of Oil 50 degrees C
Load Loss & ImpedanceAdvised impedances for 315 KVA and below range from 2.8% to 4.44%.
Transformer OilInsulating oil having low viscosity liquid according to IS 335 & international standards
View Complete Details

Variable Voltage Auto Transformer

We are the manufacturer and supplier of Variable Voltage Auto Transformer which is a technologically advanced device supplies 0 to 270 volts voltage in single phase and 0 to 470 in three phases. Our transformers deliver continuous voltage without any fluctuation. This output is accomplished through turning the knob in less than a full circular rotation. unit rangesingle phase unitthree phase unitavailabilityenclosed motor driven open ministat soil cooledtechnical specificationscapacity : 2amps, 4amps, 8amps, 10amps, 15amps, 28amps, 40amps, 50amps, 60amps, 100amps, 150amps and 200amps. salient featurescompact in sizeanti-corrosive resistant to heat withst and operational temperatureeconomicalideal forgetting variable dc voltage for electroplating setsvarying the speed of dc motorsmanufacture of voltage stabilizer up to 600 k varegulate and control the temperature of furnaces and ovens developing high capacity floating rectifiers for telephone exchanges fabricating h.v. Test sets, meter test benches, oil test sets, etc.
View Complete Details

High Current Transformer

We are engaged in the manufacturing of High Current Transformers [current injection kits] that are uniquely designed to meet the requirements of various industries. Using optimum quality raw material, we have developed our Transformers in industry-specific shapes and sizes. It is suitable for all types of lab tests.Salient FeaturesRugged ConstructionLong Functional LifeResistant to corrosionCompetitive pricingRating :Available from 1kA to 40kAIdeal ForSwitch gear testingEngineering IndustryTransformer plantsTest labs
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Uday & Shiv Shanka (South Eastern Equipment Co.)
  • 10/5 Ida Nacharam, Hyderabad, Telangana - 500076, India
  • Share us via