Water Bath / High temperature oil Bath / Calibration bath Standard Models                          :     12 Ltrs, 25 Ltrs, 40 Ltrs. Temperature range                     :    5°C above ambient to 60°C                                                                5°C above ambient to 100°C                                                                5°C above ambient to 150°C.                                                                5°C above ambient to 200°C                                                                5°C above ambient to 300°C.   Temperature Controller Digital Microprocessor based PID, Temperature indicator cum controller. Digital temperature display simultaneously shows set temperature and actual temperature. Display resolution and Temperature controlling accuracy will be ± 0.1°C. Display accuracy ±0.5%, full scale. Construction: Inner tank made of Stainless steel 304 grade, duly polished. Outer made of Mild steel with powder coated. Stirrer to maintain temperature uniformity. SS Immersion type heater. Refrigeration System CFC free refrigeration system with hermetically sealed compressor. Fin and tube air-cooled condenser.   Optional Digital microprocessor based PID indicator cum controller (Eurotherm U.K. Make) Sensor placing trays for Calibration bath. Calibration certificate traceability to NABL standards. High temperature bath upto 300°C @ extra cost.

Digital Microprocessor based, PID, Temperature Indicator cum controller with display resolution of 0.1°C. Digital Microprocessor based, PID, Humidity Indicator cum controller with display resolution of 1%Rh. (direct reading). Temperature controlling accuracy ±2°C. Humidity controlling accuracy of ±2 - 3% @ 40% to 98% Rh. Display accuracy ±0.5%, full scale. Class A grade, PT-100 Sensor (RTD) Construction: Vertical model. Inner Chamber made of dully polished Stainless Steel, 304 Grade, Outer made of Mild Steel, powder coated. Polyurethane Foam Insulation (PUF). Handle, lock and heavy-duty hinges for door. Door with Neoprene rubber gasket for leak proof. Forced air circulation to maintain uniformity of temperature. Frost Free Viewing Window to observe the testing components during working condition. Double walled full front opening door. Inner lined with SS. Long life Ni-chrome, SS heaters with fins for higher temperature. Automatic cut off for circulating fan when the door is opened Lockable Wheels for easy movement. Drain facility is provided to collect water, which is produced during humidity testing condition. Adjustable SS meshed trays. Refrigeration System: Single stage with hermetically sealed EMERSON Copeland make compressor. CFC free refrigerant filled. Fin and tube type air-cooled condenser.   Safety features: Provided with Suitable overload protectors and MCB s to ensure absolute safety to Electrical / Electronics and Refrigeration Systems. Provided with automatic water filling for humidity test. Door light is provided for viewing window. Single phase preventor will be provided for 3-phase instruments. High Pressure and Low Pressure safety cut off for Compressors. Fully solid-state relay (SSR) control for heaters. High and Low temperature deviation alarms.     Power Supply: Single-phase 230Volt / Three phase 440 Volt, 50 Hz. Optional: Calibration certificate traceability to NABL standards (Temperature controller with sensor). Tower Light with Red, Orange & Green indication to know the status of the machine. Provided with Specimen Protection to protect Components from high temperatures. With multi Programmable, cyclic Eurotherm PID controller with ramp and soak. IR lamps facility provided for component surface testing. Full Stainless steel (Inner & Outer) . Computer Interface (RS232 / 485). Available in different chamber sizes as per customer’s requirements. Note : Due to continuous development SSLIPL reserves the rights to change specifications without prior notice.  

Constant temperature bath is used to estimate Viscosity of oils, Petroleum’s product, crystal growth, etc.     Standard                                        :                2 / 4 / 8 (Universal Viscometer) Temperature range                     :                5°C above ambient to 120°C. Temperature Controller Digital Microprocessor based PID temperature indicator cum controller. Display resolution and Temperature controlling accuracy will be  + 0.1°C. Display accuracy ±0.5%, full scale.   Construction: Inner tank made of Stainless steel 304 grade, duly polished. Outer made of Mild steel with powder coated. Viewing facility provided through double walled toughened glass. Stirrer / Pump cum stirrer to maintain temperature uniformity. Provided with low wattage lighting attachment. Tray to hold viscometers. SS Immersion type heaters.     Optional Calibration certificate traceability to NABL standards. Resolution of 0.01°C (Eurotherm make) Power back up. Viscometer holders. Double stirrer / Pump cum stirrer.

Standard                                :               4 litres. Model                                     :               Floor model Technical specifications    Temperature Controller: Digital Temperature indicator cum controller with display resolution of 1°C. PT-100 Sensor. Controlling accuracy ±2°C. Display accuracy ±0.5%, full scale.   Construction: Cylindrical type drying chamber and cold trap chamber. Drying chamber and cold trap chamber made of dully polished 304 grade Stainless steel. Drying chamber size: 200mm Height X 150mm diameter. Cold trap size:  350mm L X 150mm diameter.  8-ports SS drum drying manifold with 8 quick seal valves. Plane acrylic lid. Outer made of mild steel with Powder coated. Cold trap temperature: -55°C. Two stage direct drive vacuum pump, 100 ltrs per minute. Pirani Gauge for vacuum indication. Vacuum range Upto 0.01 milli bar. Drain to collect water. Refrigeration System: Double stage (Cascade) refrigeration system. Hermetically sealed EMERSON Copeland make compressor. CFC free refrigerant filled. Fin and tube type air-cooled condenser.   Power Supply: Single phase. 230 Volts, 50 Hz. Optional: Cold trap temperature -80°C. Suitable Voltage Stabilizer. Full stainless steel model available @ extra cost. Flasks with glass adaptor. Pre- freezing bath with temperature range -40°C / -80°C.   Note : Due to continuous development SSLIPL reserves the rights to change specifications without prior notice.

• Power Supply:Single phase 230V, 50Hz.

  Bacteriological Incubators Standard size                       :               300 x 300 x 300mm / 450 x 450 x 450mm / 600 x 600 x 600mm. Temperature range             :               5°C above ambient to 60°C. Specifications: Temperature Controller: Digital temperature indicator cum controller with 0.1°C display resolution. Temperature controlling accuracy:  +  0.5°C. Display accuracy ±0.5%. Sensor: PT100, Class-A type. Construction: Inner chamber made of Stainless steel 304 grade, duly polished. Outer made of Mild Steel with powder coated. Glass wool Insulation. Air circulation provided to maintain temperature uniformity. Magnetic gasket, lock and handle for door. SS meshed trays.

   Vacuum Oven Standard size                       :               280mm diameter x 380mm depth. Temperature range             :               5°C above ambient to 100°C / 200°C / 300°c. Specifications Temperature Controller: Digital temperature indicator cum controller with 0.1°C display resolution. Temperature controlling accuracy:  +  0.1°C. Display accuracy ±0.5%, full scale. Sensor: PT100, Class-A type. Construction: Cylindrical type inner chamber made of dully polished Stainless steel 304 grade. Outer made of Mild Steel with powder coated. Air Heaters Vacuum level measured through Vacuum gauge. Glass wool Insulation. Gasket, handle and lock for door. SS meshed trays. Power Supply: Single phase 230V, 50Hz. Optional: Square type inner chamber. Large size vacuum oven, also available as per customer requirement. Hot Air Oven Standard size in mm           :   300 x 300 x 300mm / 450 x 450 x 450mm / 600 x 600 x 600mm. Temperature range             :   5°C above ambient to 100°C / 200°C / 300°C.                                                       Specifications Temperature Controller: Digital temperature indicator cum controller with 0.1°C display resolution. Temperature controlling accuracy:  +  1°C up to 200°C. Display accuracy ±0.5%, full scale. Sensor: PT100, Class-A type. Construction: Inner chamber made of Stainless steel 304 grade, duly polished. Outer made of Mild Steel with powder coated. Air heater. Glass wool insulation. Forced air circulation provided to maintain temperature uniformity. Asbestos gasket, lock and handle for door. SS meshed trays. Power Supply: Single phase 230V, 50Hz.

Standard                                :               4 litres. Model                                     :               Floor model Technical specifications    Temperature Controller: Digital Temperature indicator cum controller with display resolution of 1°C. PT-100 Sensor. Controlling accuracy ±2°C. Display accuracy ±0.5%, full scale.   Construction: Cylindrical type drying chamber and cold trap chamber. Drying chamber and cold trap chamber made of dully polished 304 grade Stainless steel. Drying chamber size: 200mm Height X 150mm diameter. Cold trap size:  350mm L X 150mm diameter.  8-ports SS drum drying manifold with 8 quick seal valves. Plane acrylic lid. Outer made of mild steel with Powder coated. Cold trap temperature: -55°C. Two stage direct drive vacuum pump, 100 ltrs per minute. Pirani Gauge for vacuum indication. Vacuum range Upto 0.01 milli bar. Drain to collect water. Refrigeration System: Double stage (Cascade) refrigeration system. Hermetically sealed EMERSON Copeland make compressor. CFC free refrigerant filled. Fin and tube type air-cooled condenser.   Power Supply: Single phase. 230 Volts, 50 Hz. Optional: Cold trap temperature -80°C. Suitable Voltage Stabilizer. Full stainless steel model available @ extra cost. Flasks with glass adaptor. Pre- freezing bath with temperature range -40°C / -80°C.   Note : Due to continuous development SSLIPL reserves the rights to change specifications without prior notice.

  Orbital shakers Shaking Incubators: Test procedures like tissue Cultures, Fermentation Studies, Enzyme Reaction test, Controlled Purification,  Ageing Test and Growth studies etc. The above said testing can be done in shaking incubators. Shaking Incubators Tray Size: 420mm x 420mm Temperature range    : 10°C above ambient to 60°C / 10°C to 60°C. Technical specifications: Temperature Controller Digital Microprocessor based PID temperature indicator cum controller with 0.1°C display resolution. Digital temperature display simultaneously shows set temperature and actual temperature. Temperature controlling accuracy:  ± 0.5°C. Display accuracy ±0.5%, full scale. Shaking Speed Accuracy of shaking speed:   +  5%. RPM Indicator cum controller 50 – 250 rpm. Digital timer. Construction Inner chamber made of Stainless steel 304 grade, duly polished. Outer made of Mild steel with powder coated. PUF / glass wool insulation. Viewing window size: 200mm x 200mm only for Incubators. Provided 50ml / 100ml / 250ml / 500ml / 1000ml Lotus clamps to hold conical flasks. Provided with Forced Air circulation to maintain temperature uniformity. Magnetic gasket, handle, lock for door. Wheels for easy movement.         Refrigeration System CFC free refrigeration system with hermetically sealed compressor. Fin and tube, air cooled condenser. Power supply Single phase 230V, 50Hz Optional Suitable voltage stabilizer. Extra clamps at extra cost. Large size of incubator also available, as per customer requirement.

Standard Models:  Vertical Models                    :               100 Ltrs, 170 Ltrs, 270 Ltrs, 325 Ltrs. Horizontal Models                :               100 Ltrs, 195 Ltrs, 255 Ltrs, 349 Ltrs. Temperature ranges            :               -20°C to ambient / -40°C to ambient / -60°C to ambient / -80°C to -40°C. Technical Specifications Temperature Controller: Digital microprocessor based temperature indicator cum controller with display resolution of 0.1°C. Controlling accuracy ±2°C @ Minimum. Display accuracy ±0.5%, full scale. Class- A grade, PT-100 Sensor (RTD). Ultra Low Temperature Research Cabinet (DEEP FREEZER) Standard Models:  Vertical Models                    :               100 Ltrs, 170 Ltrs, 270 Ltrs, 325 Ltrs. Horizontal Models                :               100 Ltrs, 195 Ltrs, 255 Ltrs, 349 Ltrs. Temperature ranges            :               -20°C to ambient / -40°C to ambient / -60°C to ambient / -80°C to -40°C. Technical Specifications Temperature Controller: Digital microprocessor based temperature indicator cum controller with display resolution of 0.1°C. Controlling accuracy ±2°C @ Minimum. Display accuracy ±0.5%, full scale. Class- A grade, PT-100 Sensor (RTD).   Construction: Inner Chamber made of dully polished Stainless Steel 304 Grade. Outer made of Mild Steel, powder coated. Polyurethane Foam Insulation (PUF). Wheels for easy movement. Door with Handle, lock and magnetic gasket for leak proof. Double walled, insulated, inner lined with SS & Foam sheet. Sub doors provided for each compartment. Adjustable SS trays. Refrigeration System: Hermetically sealed EMERSON Copeland make compressor. CFC free refrigerant filled. Fin and tube type air-cooled condenser. Power Supply: Single phase- 230 Volts, 50 Hz. Salient Features HP/ LP switch provided to high/low pressure cut off. Temperature deviation high / low alarm (audio) with silence 

Constant temperature bath is used to estimate Viscosity of oils, Petroleum’s product, crystal growth, etc.     Standard                                        :                2 / 4 / 8 (Universal Viscometer) Temperature range                     :                5°C above ambient to 120°C. Temperature Controller Digital Microprocessor based PID temperature indicator cum controller. Display resolution and Temperature controlling accuracy will be  + 0.1°C. Display accuracy ±0.5%, full scale.   Construction: Inner tank made of Stainless steel 304 grade, duly polished. Outer made of Mild steel with powder coated. Viewing facility provided through double walled toughened glass. Stirrer / Pump cum stirrer to maintain temperature uniformity. Provided with low wattage lighting attachment. Tray to hold viscometers. SS Immersion type heaters.     Optional Calibration certificate traceability to NABL standards. Resolution of 0.01°C (Eurotherm make) Power back up. Viscometer holders. Double stirrer / Pump cum stirrer.

• Power Supply:Single phase 230V, 50Hz.

  Bacteriological Incubators Standard size                       :               300 x 300 x 300mm / 450 x 450 x 450mm / 600 x 600 x 600mm. Temperature range             :               5°C above ambient to 60°C. Specifications: Temperature Controller: Digital temperature indicator cum controller with 0.1°C display resolution. Temperature controlling accuracy:  +  0.5°C. Display accuracy ±0.5%. Sensor: PT100, Class-A type. Construction: Inner chamber made of Stainless steel 304 grade, duly polished. Outer made of Mild Steel with powder coated. Glass wool Insulation. Air circulation provided to maintain temperature uniformity. Magnetic gasket, lock and handle for door. SS meshed trays.

   Vacuum Oven Standard size                       :               280mm diameter x 380mm depth. Temperature range             :               5°C above ambient to 100°C / 200°C / 300°c. Specifications Temperature Controller: Digital temperature indicator cum controller with 0.1°C display resolution. Temperature controlling accuracy:  +  0.1°C. Display accuracy ±0.5%, full scale. Sensor: PT100, Class-A type. Construction: Cylindrical type inner chamber made of dully polished Stainless steel 304 grade. Outer made of Mild Steel with powder coated. Air Heaters Vacuum level measured through Vacuum gauge. Glass wool Insulation. Gasket, handle and lock for door. SS meshed trays. Power Supply: Single phase 230V, 50Hz. Optional: Square type inner chamber. Large size vacuum oven, also available as per customer requirement. Hot Air Oven Standard size in mm           :   300 x 300 x 300mm / 450 x 450 x 450mm / 600 x 600 x 600mm. Temperature range             :   5°C above ambient to 100°C / 200°C / 300°C.                                                       Specifications Temperature Controller: Digital temperature indicator cum controller with 0.1°C display resolution. Temperature controlling accuracy:  +  1°C up to 200°C. Display accuracy ±0.5%, full scale. Sensor: PT100, Class-A type. Construction: Inner chamber made of Stainless steel 304 grade, duly polished. Outer made of Mild Steel with powder coated. Air heater. Glass wool insulation. Forced air circulation provided to maintain temperature uniformity. Asbestos gasket, lock and handle for door. SS meshed trays. Power Supply: Single phase 230V, 50Hz.