Space Age Security Systems Ltd. Delhi

Spaceage is the pioneer in uniform intensity LED based Aviation Lights as per ICAO standards. We offer 24V DC/48V DC/230V AC, 10cd/33cd lights (Type A / Type B) lights with or without light/photo sensors/switch. We offer internal/external SMPS/Sensor.  LED Aviation Obstruction Light/Lamp Our distinguishing features are: We FULLY meet the ICAO specifications We provide uniform intensity all around as opposed to most lights in market that meet ICAO mandated requirements at certain angles only. We can produce product as per tender / specifications and save costs. Range of Models We have many versions of Aviation Lights to suit every need. We offer following broad categories Voltage – 24V DC/48V DC/230V AC Sensor – Internal or External Light intensity – Low intensity Type A or Type B (for stationary low height objects) SMPS – External/Internal, Outdoor Bird Spike – With or without General features Each light consists of 135/162 (depends upon model desired) Surface mounted High Powered LEDs sourced from reliable and reputed sources. The LED's are mounted on special base that places the LEDs in absolutely uniform arrangement (as demonstrated in subsequent pages). Such an arrangement requires no additional lens or filter is to give UNIFORM light intensity. This also reduces any losses that are usually associated with lens etc. This is a UNIQUE arrangement devised by us. Body is made from Aluminium with bright orange powder coating or as per specs Totally sealed from moisture and dust. Silicon based permanent seals are used that are durable and absorbs the expansion of material in hot weather. Confirms to ICAO Annexure 14, for low intensity Type B obstruction light The light produced by LED's is RED in color and no additional color filters/Lens are required. (The filters / lens absorb part of light and fade after some time) Since the light produced by LED is directional in nature there are no reflectors or obstructions to reduce the dissipation of light. Our External SMPS model has option to bypass external sensor so that in case there is a problem with sensor, it can just be bypassed by flick of a switch. This gives enough time for operations staff to change the light, as and when convenient.

Send SMS to START/STOP motor (or any other electric equipment). Can be used with Water pumps, Industrial motors, AC, DG etc. System sends SMS back if input Voltage less (Single/Three phase). Get status of motor/appliance through SMS. If Motor/equipment fails, then system sends SMS. Electricity failure/resumption SMS during motor/device operation. Automatic ON after power failure. Motor ON duration SMS. Can be controlled ONLY by authorized personnel – up to 4 users. System can't be reprogrammed in case of theft of system. Easy installation – can be done by user himself. Motor ON warning buzzer. 2x1.2AH Battery used for Power Back-up. Robust construction for dusty/humid environments. Saves manpower. 

• Mains onGreen indication
• System onGreen indication
• FireFlashing indicator & fire tone
• Fire sensor open/shortIndicator and tone by internal speaker
• Door openRed indicator & beeper tone

Ultrasonic motion detectors generate inaudible sound waves/patterns and recognize a disturbance in those patterns caused by an intruder. These are compact devices which make the installation simple. The ultrasonic transmitter transmits high frequency, inaudible sound waves into the protected area and the receiver picks up the energy reflected back to the unit by the walls, ceiling, floors and other fixed objects in the enclosed area. The received signal is processed and analyzed by the signal processor. An intruder moving into the protected area causes some waves to be reflected resulting in change of pattern and hence change in strength of signal received by Receiver. If there is no movement within the area of coverage, the signal strength remains unchanged. These changes causes the unit to detect the movement and sound the alarm. While both ultrasonic and microwave use the same principle to detect motion, a microwave uses a much higher frequency and as a result it can detect motion through most walls & partitions. Motion Sensors generate signals in the range between 19 and 40 kilo hertz which is above the frequencies that a normal ear can hear. Ultrasonic energy is contained completely in the area it is operating. It will not penetrate walls or windows but is absorbed by carpet, curtains and false ceiling. Obstructions within a room will reflect the ultrasonic energy and distort its shape pattern. Typical detection range of ultrasonic units is 20 feet wide by 30 feet long in a room with a ceiling up to 12 feet high. Ultrasonic detectors can be prone to false alarms due to excessive air currents and other extraneous ultrasonic noises. Proper application and installation of this equipment is very important. The ultrasonic units can be mounted on any plane, vertical or horizontal or in any location - ceilings, walls, corridors - projecting the ultrasonic pattern at any desired angle. These units provide volumetric space protection.

04 independent Channels for real time Temperatures Monitoring 01 Channel for Humidity Monitoring 02 Channels of volt free inputs can be taken by the system so that sensors such as Raw Power, UPS Power (Single / Three Phases), Smoke, Flood, Motion, Room Entry etc. Alerts sent via SMS using GSM modem. E-mail Alert through GPRS or TCPIP (Optional) RS-232 port to connect PC/Laptop for downloading data Threshold user denable for each sensors LCD display and scroll option to view data on unit LED indications. Threshold can be congured on Panel as well as through RS 232 (software provided) SMS request to know the current sensors status – No need to visit site or open PC Event or Sensors log history can be recorded and view on Panel as well as on PC/Laptop Audio alert through Buzzer as well as on Hooter Hooter can be mounted remotely (wired) for effective monitoring & Audio Alarm System works independently. No host PC or existing IT infrastructure is required Doesn't matter whether you are in ofce or out of station, you can monitor your data center any time. Input power supply 220V and 50Hz User friendly operations and easy installation. Device can be used in many other applications such as Bank ATM, Laboratories, HUB Room, Cold Storage, Warehouse, Poultry Farms, and Hospitals etc. . .