Spink Controls, Thane - Measuring Instruments & Equipment

The ori-flow meter measures flow by inserting an orifice at part of the piping, generating differential pressure before and behind the orifice by means of the flow, and extracting this differential pressure by a suitable method. Differential pressure (p1-p2) of main orifice & the flow q have shown in equation given below. The flow is proportional to square root of the differential pressure. Q=cf [2g(p1-p2)]^12 Q :volumetric flowc :flow co-efficientf :cross sectional area of orifice holeg :acceleration of gravityp1-p2 :differential pressure: specific weight of fluid The generated differential pressure is sent to the manometer or other differential pressure gauge & a differential flow meter can be formed by attaching a flow scale to this gauge. However, since flow indication is square root scale reading is difficult. Moreover, in case of remote transmission it is inconvenient because the evolution operation is performed to obtain linear relation. Therefore if a bypass pipe connecting before and behind point of the main orifice is installed and the flow is branched to that pipe to overcome these disadvantage, that flow becomes proportional to the differential.

The Gas Flow Meter is orifice flow meter measures flow by inserting an Orifice Plate in the block between the pipes.The Differential pressure is detected by highly sensitive differential pressure transducer, by which the pressure drop is very low.

The ori-flow meter measures flow by inserting an orifice at part of the piping, generating differential pressure before and behind the orifice by means of the flow, and extracting this differential pressure by a suitable method.Differential pressure (p1-p2) of main orifice & the flow q have shown in equation given below. The flow is proportional to square root of the differential pressure.The generated differential pressure is sent to the manometer or other differential pressure gauge & a differential flow meter can be formed by attaching a flow scale to this gauge. However, since flow indication is square root scale reading is difficult. Moreover, in case of remote transmission it is inconvenient because the evolution operation is performed to obtain linear relation.Therefore if a bypass pipe connecting before and behind point of the main orifice is installed and the flow is branched to that pipe to overcome these disadvantage, that flow becomes proportional to the differential.

Spink Electromagnetic Flowmeter-Instrument designed for measuring and indicating flow and total volume of conductive liquids. As there are no moving parts in the flow profile the device can be used to measure extremely dirty liquids containing solids. The flowmeter is for use with conductive liquids only. Range of applications. The flowmete has been designed for use in all process industries including chemical, water and wastewater. Features. The inductive flowmeter R-401 is a highly accurate and stable device. The construction of the flowmeter uses components with a long-term time and temperature stability.