Spirare Energy Pvt. Ltd.

Tolstoy Marg, Delhi

Refrigerated Air Dryer is used to remove the dampness of air by cooling it to certain temperature. We offer different varieties of Refrigerated Air Dryers in various compact designs. We are a trusted Manufacturer, Supplier and Exporter of Refrigerated Air Dryers. These Refrigerated Air Dryers offered by us are acknowledged for their energy efficiency and performance. Working : The notion of productive cooling is evacuation of high temperature only. The air first enters into the pre-cooler where the approaching hot air is almost always cooled by friendly frosty air in order to diminish the hotness load of evaporator. The air from pre-cooler enters into the evaporator where further high temperature is evacuated by bubbling refrigerant like Freon. Right away the air gets condensate and this moist air is passed through a dampness separator where dampness is emptied out by outward activity of air. The soggy free air enters into pre-cooler to cool the approaching air. Features : Least pressure drop. Simple and compact design Efficient Power Saving Easy maintenance.

• Brand NameGardner Denver
• Horse Power5 HP
• Cooling MethodWater Cooled

We are a prominent Manufacturer, Exporter and Supplier of High Pressure Hydrogen Gas System . He High Pressure Hydrogen Gas System offered by us is capable of delivering up to 40 Barg Hydrogen (99.999% pure) without any compressor. Our High Pressure Hydrogen Gas System comprises of Asbestos or Non asbestos membrane depending on clients requirements. The hydrogen delivered comprises of oxygen impurity of less than 1 ppm and dew point of better than (-) 80ºC. We use the most advanced instruments for manufacturing this High Pressure Hydrogen Gas System. The whole plant can be operated remotely and configured through HMI/computer Work station as per customer requirement.

• PurityUp to 99.99%
• Capacity1 NM3/Hr To 1000 NM3/Hr
• Power249 W
• Automation GradeAutomatic

Methnolysis Hydrogen Gas Generating System is among the advanced Systems for producing Hydrogen. We are engaged in manufacturing, exporting and supplying Methnolysis Hydrogen Gas Generating System. The Methnolysis Hydrogen Gas Generating Systems offered by us are easy to operate and require low production investment and low transportation cost. Process : CO and H2O change into CO2 and H2 under the effect of the activator. Carbinol is decomposed into CO2 and H2 under the effect of the activator. Make use of the technology of the pressure swing absorption to decompose CO2 and a trace of CO from the decomposed gas and make comparatively high purify product H2.

We are a trusted Manufacturer, Supplier and Exporter of Heat Reactivated Air Dryer . We offer easy to install Automatic Heat Reactivated Air Dryers with air capacity of 50 to 3000 NM3/ Hr. Heat Reactivated Air Dryers offered by us are widely appreciated for their flawless performance and longer service life. Construction and Working : Heat Reactivated Type Air Dryers are utilized when necessities packed quality of extremely low Dew purpose of (-) 60°c or (-) 80°c. In this outline, the desiccant is recovered at higher temperature, as well as modest amount of Dry Air cleanse. Because of cleansing with Dry Air and warm recovery, leftover dampness stacking on desiccant comes to be low and this gives exceptionally low Dew focus. The Drying unit has 2-vessels loaded with activated alumina or molecular strainers desiccant. One vessel stays in drying cycle for 4 hours, while other vessel is concurrently recovered at air force. Around 3% stream of dryer limit is utilized as cleanse for recovery. Electrical warmers are furnished in a focal finned Stainless steel pipe in both drying vessels. Warming cycle is for 2 hours and in this time hot cleanses air increments desiccant temperature to around 100°C. At this temperature recovery is finish (because of dry air cleanse). Dew focus accomplished is around (-) 40°C. Assuming that still easier Dew focus is needed, air cleansing rate is somewhat expanded to 5% for (-) 60°C and to 7.5% for (-) 80°C Dew point. Features : Requires less attention of operator Longer life of operation Heaters and valves are operated automatically Once installed can be operated automatically Easy maintenance

Gas Cylinder Manifold System , we offer, consists of a main gas delivery bank and a reserve bank of cylinders. When the primary cylinder bank is depleted, manually turn off the valve on the primary bank and open the valve on the reserve bank to reactivate gas flow. The changeover of this system needs to be operated manually. Features Open-style manifold Brazing / SS welding on piping joints for maximum leak prevention System is designed to accomodate future expansion needs Headers have been tested to withstand high cylinder pressure Wall or floor mount available

We are a renowned Manufacturer, Exporter and Supplier of Low Pressure Hydrogen Gas System . Our Low Pressure Hydrogen Gas System is manufactured with finest material using advanced technology. The Low Pressure Hydrogen Gas Systems offered by us are widely appreciated for their flawless performance. Clients can avail Low Pressure Hydrogen Gas System from us at market leading prices. Advantages : Sealed Design  No contact of electrolyte with atmosphere. Due to its sealed design, there is no loss of Hydrogen Gas or electrolyte during operation. Even when Sealed Unipolar Cell plant is switched off, no eddy currents flow in the system. This ensures sustained efficiency and no change in power consumption even after several years of use. The Gap between the Electrodes (in unipolar cell) is minimal as the cell is very efficient. The geometry of the cell is such that the electrolyte flows uniformly in the cell on its own without an external pump. Even though cathode and anode are separate plates, Sealed Unipolar cell design makes it possible to reduce space between Anode and Cathode electrode surface similar to Bipolar. This design makes it possible to service Unipolar Cells in the field. In the event that maintenance is required in the Sealed Unipolar cell, a single cell can be removed from the line and production continued on the balance of the plant. The Sealed Unipolar cell operates at lower current densities of 150 mA/in2 & thus operates for longer periods of time without overhaul. No auxiliary pumps & filters/electrolyte recirculation required. It is easy to analyse both hydrogen and oxygen on the Sealed Unipolar cell Purity is achieved within 5 minutes of startup, even in very cold conditions.

A Nitrogen Gas Generation System with Copper Catalyst Module to SE-MS Generator is known as SE-(CU)DX Nitrogen Gas System . SE-(CU)DX Nitrogen Gas System helps in providing immaculate gas that is free from Oxygen and Hydrogen. Advantages : Skid mounted units for easy site installation and easy usability Less Start-up time, say 5-7 minutes only. Nitrogen Gas supply always under your control. Cost of Nitrogen only INR 3.00 to INR 5.00 (US 8 to 10 cents) per cubic meter only. Carbon Molecular Sieves life is around 5-7 years. Applications : As Inert gas in Electronic, Synthetic Fiber, Hi-tech Industries where one needs Ultrahigh purity Nitrogen.

We are engaged in manufacturing, supplying and exporting SE-DX Nitrogen Gas System . SE-DX Nitrogen Gas System is widely demanded in metallurgical commercial plants to produce oxygen free Nitrogen. The Nitrogen produced consists of less than 1 ppm oxygen impurity, and 0.5 to 1% Hydrogen which is required as a decreasing constituent for Heat Treatment applications. SE-DX Nitrogen Gas System is used in steel and chemical industries and utilized for cleansing applications. Advantages : Skid mounted units for easy site installation and easy usability. Less Start-up time, say 5-7 minutes only. Captive Nitrogen Gas supply always under your control. Cost of Nitrogen only INR 3.00 to INR 5.00 (5 to 7 US cents) per cubic meter only. Carbon Molecular Sieves life is around 5-7 years. Applications : As Inert gas in Chemical & Steel Industries. In applications where Oxygen impurity is not acceptable.

We manufacture, export and supply SE-MS Nitrogen Gas System . A SE-MS Nitrogen Gas System produces 99% pure nitrogen gas. The nitrogen purity can be improved to 99.999% by increasing Carbon Atomic Sieves. SE-MS Nitrogen Gas System has its application in cleansing or inertizing necessities. Advantages : Skid mounted units for easy site installation and easy usability. Less Start-up time, say 5-7 minutes only. Captive Nitrogen Gas supply. Cost of Nitrogen only INR 3.00 to INR 5.00 (5 to 7 US cents) per cubic meter only. Carbon Molecular Sieves life around 5-7 years. Applications : As Inert gas in Chemical Industries, Food & Pharmaceutical Industries. For fire control in Coal mines etc.

We are an eminent Manufacturer, Exporter and Supplier of best quality Oxygen Gas Generation System . Oxygen Gas Generation System provides up-to 93% pure Oxygen. The Oxygen Gas Generation Systems find their application in various industries like steel furnaces, glass melting, paper bleaching, and many other industries. Working : The Oxygen purifying process comprises of two vessels loaded with Special Grade Molecular Sieves. Clean packed air at 30° C temperature is passed through one vessel and oxygen turns out as product gas. The exhausted gas (Nitrogen) is released go into environment. Upon immersion of the subatomic strainer bunk, the procedure switches Oxygen era to the next cot via immediate valves, while permitting the soaked couch to experience recovery by depressurization and cleansing to atmospheric pressure. Subsequently two vessels continue cycling on the other hand in Oxygen handling and recovery guaranteeing Oxygen gas is ceaselessly accessible to your methodology. Applications : Lamps Industry Pharmaceutical Industry Steel Industry Glass Industry Brazing Industry T.V. Picture Tube Manufacturing Industry Chemical & Petrochemical Water Treatment

Ammonia Cracker System acts as a catalytic splitting unit to split the Ammonia into Nitrogen and Hydrogen (2NH3 = 3H2 + N2). The hydrogen production cost gets extremely low with Ammonia Cracker System. We offer Ammonia Cracker Systems at most reasonable price in the market. Working : Refrigeration review fluid Ammonia from barrels or tanks is utilized as food. The item gas has 75% Hydrogen and 25% Nitrogen. This gas is further sanitized in a molecular sieves unit for evacuating un-split Ammonia and dampness. Filtered gas is then utilized as a part of heat treatment heaters like tempering, sintering, and galvanizing and likewise as a reducing heater environment. It is generally utilized as a part of stainless steel and carbon steel brilliant tempering.

We are engage in offering Fully Automatic Compression Heat Air Dryer across the world. We manufacture, supply and export high quality Compression Heat Air Dryers that are appreciated for their flawless performance and low maintenance. Our Compression Heat Air Dryers can produce 100 Nm3/Hr. to 4000 Nm3/Hr. Compressed Air. Working : Compressed air, straightforwardly from Air compressor release is taken to Air Dryer inlet through separated pipelines, at 120C (minimum) temperature. This hot air is passed through one drying vessel where soaked desiccant is recovered by this hot air. In the wake of getting dampness from desiccant mattress, the Air is cooled in a middle of the road cooler. Here dampness is dense and evacuated via auto channel valve. Cooled to 40C, this air passes as the second progressed drying vessel where dampness gets adsorbed and dry air turns out. Process duration is 4 hours recovery and 4 hours drying. 4 hours later the changeover of vessels happens immediately. In recovery cycle warming of the mattress is for 2 hours, and from that point the cot is cooled by dry air. After cot cooling, dry Air is again cooled to 40C in an alternate cooler and conveyed as Dry air at 40 °C Temperature. Features : No power requirement for regeneration No loss of compressed air Maintenance is easy. Low-pressure drop across the Dryer Skid mounted Fully automatic Continuous operation

Heatless Compressed Air Dryer is a simplest form of Air Dryers, used to produce compressed air with a dew point of (-) 40°C. It has large industrial applications. We manufacture, export and supply superior quality Heatless Compressed Air Dryers with low pressure drop. We offer automatic Heatless Compressed Air Dryer with high functionality. Features : Fully automatic operation Easy maintenance Trouble free operation Low pressure drop

We are one of the eminent Manufacturers, Exporters, and Suppliers, offering Pressure Reducing Stations with pressure control systems. We use only high quality components in the manufacturing of Pressure Reducing Station, which ensure reliability of the system. Our Pressure Reducing Station is exclusively engineered, designed, and fabricated using advanced technology. We offer the equipment after hydro testing before the dispatch.