SRIRAM POWER SAVER

AirConditionerPermanentlykeptON is one of highest energy consumers in the residential and industrial sectors air conditioner is not customized for each climate zone separately .Hence common setting for hottest climate zone is getting employed in all the Air conditioner Since air conditioners are not designed for different climatic zones. When the set temperature is achieved, the compressor continues to run for an additional fixed period say 6-8 minutes known as the over cooling period which is required only for few hours in a day in peak summer

A large percentage of electrical energy is utilized in running motors in industries. A wide variety of motors are used depending upon the application.Star Delta Starters are used with squirrel cage induction motors to reduce the starting current. They operate the motor in star mode at start and after the set time delay, it switches over to Delta mode and continuous to run in delta irrespective of whether the load is low or high.

Welding ideal energy saver is a electronics sensing unit its the detects the voltages across the electrode gun and these non-weld periods and switches off the power to the welding transformer by using a contactor (contactor not supplied by us). After preset time interval and hence saves power during these periods. When welding operator need to touch the electrode to the material to be welded and the unit instantly starts the weld, which then can be carried on continuously.

Injection motor solid state energy saver is a electronic unit .it comes along with current transformer. The current transformer is to designed and match the each capacity of full load current. The current transformer sensing line current is below 50 percentage of full load current.the energy saver unit motor is to operate in star mode and till the line current rises to 48 percentage of full load . When the sensing current reaches set current of 48 percentage i.e line current of full load injuction motor energy saver unit to operate , the motor in delta.