We offer Acrylic Single Limbed Manometer. Item : Single limbed acrylic tube manometer Range : 0 – 30 mm in Wc Hg with 1 mm Wc Hg 0 – 50 mm in Wc Hg with 1 mm Wc Hg 0 – 100 mm in Wc Hg with 1 mm Wc Hg 0 – 150 mm in Wc Hg with 1 mm Wc Hg 0 – 200 mm in Wc Hg with 1 mm Wc Hg 0 – 300 mm in Wc Hg with 1 mm Wc Hg 0 – 500 mm in Wc Hg with 1 mm Wc Hg OR As required End fittings : ¼” PP SS nozzles Description : Single limbed acrylic tube block with calibrated scale Mounting : Wall mounting Make : Ji Accuracy : +- 1% FSD

We offer Tempreature Calibration Bath (dry Block Type Tb - 600). TEMPERATURE CALIBRATION BATH (DRY BLOCK TYPE TB - 600 ) DESCRIPTION The Test instrument TB – 600 consist of two single enclosures. Front size 150 X 150 mm & 280 mm depth. They are connected with each other & equipped with a portable handle. The left enclosure contains a block with bore diameter of 18.5 mm & 110 mm depth which can reached from the top, face the reception of the test piece. In this block the heating cartridge & temperature sensor for the determination of the block temperature are installed accesses from the bottom. The right enclosure contains: PID controller for control of the block temperature in which we can see the set value & present temperature of the block. Power switches & power on indicator Fan ON OFF switch for cooling the block.

We offer Ji Bourdon Type Pressure Gauges. Dial size : 40, 50, 63, 100, 150, 200, 250mm Case : Pressed steel or stainless Steel Mounting : Surface, Direct, Back or Panel Range : 760mm Hg to 0 vaccum, 0 to 700Kgcm² Comp-760mm Hg to 28 Kgcm2 or Bar & Psi Scales. Working parts : Non ferrous Connections : 18", 14", 38" , 12" BSP, NPT, OR Metric Threads ACCURACY : +- 2% FSD Note : Glycerine filled on request. Ammonia & Oxygen Gauges also avaliable.

We offer Ji Bimetal Dial Thermometers. Dial size : 63, 100, 150 mm Case : Pressed Steel Chrome plated or SS Mounting : Back Horizontal or Bottom Vertical Bulb & Stem : 2", 3", 6", 9", 12" std. Upto 48" long Connection 12" BSP (M) or as required Bulb, Stem & Connection Material : M.S.Chrome plated or SS Bulb & Stem dia : 14", 38" Range : +- 2% FSD Accuracy : -20 to 60C to upto 600C

• PatternPrinted
• MaterialPolyester
• Number of Pockets3

• OccasionCasual Wear
• MaterialPolyester
• PatternPrinted
• Closure TypeZipper
• Capacity5 kg
• Country of OriginMade in India

• PatternPrinted
• MaterialPolyester
• Number of Pockets3

We offer Ji Bimetal Dial Thermometers. Dial size : 63, 100, 150 mm Case : Pressed Steel Chrome plated or SS Mounting : Back Horizontal or Bottom Vertical Bulb & Stem : 2", 3", 6", 9", 12" std. Upto 48" long Connection 12" BSP (M) or as required Bulb, Stem & Connection Material : M.S.Chrome plated or SS Bulb & Stem dia : 14", 38" Range : +- 2% FSD Accuracy : -20 to 60C to upto 600C

We offer Dead Weight Pressure Gauges Tester. Use of in the Dead Weight Pressure Gauge Tester. The main components of a Dead Weight Pressure Gauge Tester are: Screw Pump to generate pressure in the circuit. Of adequate capacity and operated by turning the spoked handle. Permits easy and accurate setting of pressure. Free Piston Assembly of special steel, hardened, tempered, ground and lapped to accurate size and very fine surface finish to provide true floating action. Set of Weights directly marked in convenient values of pressure and easily stacked on the carrier weight. Available in eitherand kgfcm2, bar Cbfin² units. Other units on request. Storage box provided. Incremental weights to provide smaller steps available at extra cost for all models mentioned below. Gauge Connector of 12" BSP (female) union for connecting gauge to be tested. Other sizes of gauges can be connected by using adaptors. Baseplate of sturdy construction provided with legs and levelling screws. The entire circuit is protected by a Sheet Metal Cover.

We offer Gauge Cock. A. Body FEATURES : B. Instrument Connection. Both round and square models available C. Process Connection. Teflon seals (PTFE) D. 65 mm. available in 2-way vent hole type and 3-way E. 60 mm. cock F. In 3-Way Cock Thread Connection 2-way vent hole. CONNECTIONS : Provided threads as per thread chart and also can be requirement. MATERIAL : SS 316, SS 304, Brass. : Can Be Provided Specify Requirement. ORDERING : Material, INFORMATION Thread Connection, And Type. PRESSURE : 0 To 60 kgcm² TEMPERATURE : 0 To 60°C

• Type of Travel BagDuffel Bag
• Water ResistantYes
• Handle ExtendableYes
• HandmadeYes
• PatternPlain

We offer Every Angle Dial Thermometers. Dial size : 63, 100, 150 mm Case : Pressed Steel Chrome plated or SS Mounting : All Every Angle, 180 deg. Rotation Bulb & Stem : 2", 3", 6", 9", 12", std. To upto 48" long Connection : 12" BSP(M) or as required Bulb, Stem & Connection Material : M.S Chrome plated or SS Stem dia : 14", 38" or as required Range : -25 to 60C to upto 600C Accuracy : +- 1.5% FSD