Our Products
Type A (annular) flexible hoses are made by corrugating thin-walled stainless steel pipes. They are high-quality flexible hoses exposed to complete solution heat treatment. The corrugations are formed like individual rings which are not twisted under high pressure.
The hoses are highly flexible and have excellent strength, corrosion resistance and pressure resistance.
Braiding ProcessTo give corrugated hose the ability to withstand pressure, stainless steel wire is braided over the hose. Hoses may be single braided (one layer of braid) or double braided (two layers of braid) to achieve even greater working pressures. Braided braid is used on large-diameter hose.
Designing the proper braid for each type of corrugated hose requires sophisticated engineering to maintain the proper balance between the braid strength and the hose's flexibility. Hose Master's braid packages offer several advantages :High Percentage Braid Coverage - Hose Master flexible hose has the highest percentage of braid coverage, yielding better cycle life and protection against damage to the hose.Machine Braided Hose - Hose Master weaves the braid directly onto the hose, ensuring that the braid fits tightly against the hose, preventing potential hose deformation or squirm. Machine braided hose also offers repeatable performance and longer cycle life.
Specifications
ID (In) | ID(MM) | Approx Wt(ib s/ft) | Min Bend Rad (In) | Max Rec WP (psi) |
---|---|---|---|---|
1 | 25.4 | 0.8 | 5 | 250 |
1/1 | 38.1 | 1 | 6 | 250 |
2 | 50.8 | 1.2 | 6.5 | 250 |
2/1 | 36.5 | 1.6 | 8 | 250 |
3 | 76.2 | 2 | 9.5 | 250 |
4 | 101.6 | 4.4 | 16 | 250 |
6 | 101.6 | 7 | 20 | 250 |
8 | 203.2 | 10 | 29 | 250 |
Specifications
ID (In) | ID (mm) | Approx Wt (ibs/ft) | Min Bend Rad (in) | Max Rec WP (psi) |
---|---|---|---|---|
1 | 25.4 | 0.8 | 5.0 | 250 |
1-1/2 | 38.1 | 1.0 | 6.0 | 250 |
2 | 50.8 | 1.2 | 6.5 | 250 |
2-1/2 | 63.5 | 1.6 | 8.0 | 250 |
3 | 76.2 | 2.0 | 9.5 | 250 |
4 | 101.6 | 4.4 | 16.0 | 250 |
6 | 152.4 | 7.0 | 20.0 | 250 |
8 | 203.2 | 10.0 | 29.0 | 250 |
10 | 254.0 | 23.0 | 40.0 | 150 |
Teflon is ideal material for flexible hose, to which a wire over-braid is added for exceller pressure ratings. Such hose gives extremely long life because its inner core has outstanding resistance to steam, chemicals, solvent, heat, pressure impulses, flexing, vibration, and age.
Specifications
I.D. Inches | I.D . mm | O.D. mm | Operatin g Pressure PSI At Room Temp |
Minimum Bend Radius |
---|---|---|---|---|
3/16 | 4.76 | 5.9 | 3000 | 50.8 |
1/4 | 6.35 | 7.9 | 3000 | 50.8 |
5/16 | 7.93 | 9.5 | 3000 | 76.2 |
3/8 | 9.52 | 11.3 | 2500 | 101.6 |
1/2 | 12.70 | 13.9 | 2000 | 132.1 |
5/8 | 15.87 | 16.5 | 1500 | 165.2 |
3/4 | 19.05 | 19.8 | 1200 | 195.6 |
1 | 25.04 | 26.2 | 1000 | 228.6 |
A lightweight flexible chemical transfer hose designed for almost every common industrial chemical used in industry today. Nonstaining UHMW tube.
Specifications
ID | OD | Piles | WP PSI | MBR | WP PSI |
---|---|---|---|---|---|
3/4 | 1.19 | 2 | 3.5 | 29" | 200 |
1 | 1.47 | 2 | 4 | 29: | 200 |
11/4 | 1.80 | 2 | 4.5 | 29" | 200 |
11/2 | 2.08 | 2 | 5 | 29" | 200 |
2 | 2.58 | 2 | 8 | 29" | 200 |
21/2 | 3.03 | 2 | 0 | 29" | 200 |
3 | 3.61 | 2 | 16 | 29" | 200 |
4 | 4.61 | 2 | 24 | 29" | 200 |
Specifications
ID (In) | ID(MM) | Approx Wt(ib s/ft) | Min Bend Rad (In) | Max Rec WP (psi) |
---|---|---|---|---|
1 | 25.4 | 0.8 | 5.0 | 250 |
1-1/2 | 38.1 | 1.0 | 6.0 | 250 |
2 | 50.8 | 1.2 | 6.5 | 250 |
2-1/2 | 36.5 | 1.6 | 8.0 | 250 |
3 | 76.2 | 2.0 | 9.5 | 250 |
4 | 101.6 | 4.4 | 16.0 | 250 |
6 | 101.6 | 7.0 | 20.0 | 250 |
8 | 203.2 | 10.0 | 29.0 | 250 |
Specifications
ID | OD | Piles | WP PSI | MBR |
---|---|---|---|---|
3/4 | 1.25 | 2 | 150 | 4 |
1 | 1.5 | 2 | 150 | 5 |
11/20 | 2 | 2 | 150 | 6 |
2 | 2.5 | 2 | 150 | 7 |
3 | 3.52 | 2 | 150 | 9 |
4 | 4.52 | 2 | 150 | 12 |
Corrugated transfer hose, is the most broadly applied a general-purpose workhorse found in undreds of chemicals transfer and food handling situations. Its present locations are as diverse as water purification systems, mercury transfer lines, and food processing equipment - delivering better to mixing kettels or sausage and other processed meats to packaging machines.
Specifications
I.D. Inches | I.D. mm | O.D. mm | Operating Pressure PSI At Room Temp |
Minimum Bend Radius |
---|---|---|---|---|
1/2 | 12.7 | 20.0 | 1000 | 25.4 |
3/4 | 19.5 | 27.7 | 1000 | 50.81 |
1 | 25.4 | 33.0 | 1000 | 76.2 |
11/4 | 31.7 | 39.6 | 1000 | 158.8 |
11/2 | 38.1 | 45.5 | 750 | 190.5 |
2 | 50.8 | 59.2 | 500 | 266.7 |
3 | 76.2 | 93.5 | 250 | 393.7 |
4 | 101.6 | 123.2 | 150 | 622.3 |