SS MICROAIR SOLUTION Kolkata, West Bengal

• MOQ 30 Nos
• TypeAir Filter
• MaterialMetal
• ShapeRectangular
• ConditionNew
• Is It WashableNo
• Corrosion ResistanceNo
• Operating TypeManual
• Packaging TypeCorrugated Box
• UsageTextile Industry, Pharma Industry, Air Filter
• SpecialitiesHassle-Free Functioning, Ease Of Install, Heat Resistance

A HEPA filter is a high efficiency pleated air filter capable of capturing extremely small particulate matter down to particles that are the size of a micron (µ), or a micrometer, which is 1/1000th of a meter. They are a common part of air purification systems since they strictly comply with the standards set for pollutant removal. The anagram HEPA stands for high efficiency particulate air, which is an efficiency standard that applies to air filtration equipment and systems capable of removing the most minute particulate matter.

• MOQ 30 NOS
• TypePre Filters
• CertificationCE Certified
• Weight3-4kg, 5-6kg, 9-10kg
• ConditionNew

A pre-filter is an integral part of almost any air purifier that you see on the market. It's  the first stage of filtration, and it essentially helps to capture large particles . This prolongs the life of your filter, and it makes your system much more efficient.

• TypeLouver Dampers
• MaterialGalvanized Steel
• ShapeRectangular, Square
• ApplicationPressure Adjustment, Ventilation
• ColorBlack-grey, Grey, Shiny Silver
• FeatureAdjustable, Durable, High Quality
• Surface FinishingPolished

What is a Louver Damper? A louver damper is  a device that has horizontal blades that rotate on a fulcrum in order to control the flow of materials . These dampers are able to offer precise flow regulation with little to no leakage, depending on the design.

• MOQ 30 Nos
• TypeAir Damper
• MaterialMetal
• ShapeRectangular, Square
• ColorBlack-grey, Grey, Shiny Silver
• FeatureAdjustable

An HVAC damper is  a small valve or plate that regulates the airflow inside a building's heating, ventilation, and air conditioning (HVAC) system . The damper works by opening or closing to varying degrees in order to control the flow of air through different rooms or zones within the structure.

Prefilters are designed to remove particles down to 3, 5 or 10 microns (identified as super, standard and junior) at retention efficiencies 99%, 98% and 95% respectively when tested as per bs 2831 using test dust ii. The fiber glass media (4, 2, 1 layers respectively for 3, 5 & 10 microns) inhibits growth of microorganisms, it is sandwiched between 2 layers of hdp mesh and reinforced with anodized aluminum grills on both sides. The filter matrix is housed in an g.i sheet frame with flanges and closed-cell neoprene gasket. Filters can be cleaned with water, mild detergents or compressed air in reverse direction.

Prefilters are designed to remove particles down to 3, 5 or 10 microns (identified as super, standard and junior) at retention efficiencies 99%, 98% and 95% respectively when tested as per bs 2831 using test dust ii. The fiber glass media (4, 2, 1 layers respectively for 3, 5 & 10 microns) inhibits growth of microorganisms, it is sandwiched between 2 layers of hdp mesh and reinforced with anodized aluminum grills on both sides. The filter matrix is housed in an g.i sheet frame with flanges and closed-cell neoprene gasket. Filters can be cleaned with water, mild detergents or compressed air in reverse direction.