Gurugram, Haryana, India
Our Products
| ||||
|
| Inner conductor of copper wire or copper clad aluminium wireDielectric of highly foamed Polyethylene.Outer conductor corrugated copper tube with spiral corrugationExternal sheath of Polyethylene or flame-retardant, halogen-free material (FRNC) |
Protection:
IIA, IIB & IIC, IP-65
Rating Upto:
2X36 / 40WEnergy savingRapid start-upHigh illumination efficiencyLow cost and high reliabilityGood quality and low pricePower consumption: 18W or 36WOEM orders are available
Available in T5, T8 or T9
|
Specially developed connectors by using advanced
technology that guarantees superior electrical
characteristics
Injection moulded sealing on the cable jacket
Used cable jackets of flame retardant, halogen-free
material (FRNC)
Low intermodulation product IM3 > 160 dBc
Excellent return loss up to 2.7 GHz > 28 dB (VSWR < 1, 08)
Pulling eye ( Stocking) is a stocking of wire rope used to grip the OFC without damaging the ends of the OFC. Anti twist Device as the name indicates in used for removal of twist the unwrapping of OFC from the cable drum at site.
Mild steel Step Ladder
| 3 or 2 Step LadderGalvanised or Painted |
Size can be customized as per customer specifications
| ALARM OUT | ||
| ||
| ALARM IN (FOR REMOTE START & STOP OF DEVICES AT SITE) | ||
| ||
| POWER SUPPLY FOR SYSTEM | ||
| System will operate on 12 V DC / 24 V DC available at Site. | ||
| ALARM INDICATION | ||
| ||
| SPECIAL FEATURES | ||
|
The rack mounted Coupler Module is a connectorised Coupler housed in a rac mountable case. The face plate replaces a single Six pack and is standard to industry rack mounts. This unit can be used for digital or analog networks.
We manufacture a new generation of cable entry systems that provide perfect fit to all types of coaxial cables used in transmission. Rubber boots are made out of specially formulated self-compressing EPDM rubber that makes it water proof and weather resistant. The grade of rubber used to manufacture boots excels in properties like heat resistance, ozone resistance, weatherproofing and withstanding low temperatures.
Copper Grounding Clamps, Copper Grounding Connectors, Bronze Grounding Clamps, Bronze Clamps, Copper Clamps, Bronze Grounding Connectors, Lugs Copper, Bronze Grounding lugs.
Our DDF is used as a connecting panel for signals of 2 Mb/s, 8 Mb/s, 34 Mb/s, 140 Mb/s, 155 Mb/s. It provides a smooth flow of signals. It is an easy interconnecting device for digital streams between lower order and higher order digital multiplexing equipment and vice versa. It provides looping of streams and cross connecting one or more streams with patch chords thus testing and monitoring the signals without interrupting the normal communication link. We manufacture DDF in sizes of 2750mm and 2250 mm (as per customers requirements) with 8 DDM.
Grounding Bar- Shown on the left is an grounding bar of size 300mmX100mmX6mm with 24 holes of dia 10mm each. Also available is a grounding bar of size 300mmX50mmX6mm with 26 holes of dia 8mm each.
We can also manufacture a grounding bar of a different size and design as per the client's requirements.
They provide a reliable solution to split / combine signals. They are available in various splitting ratios to suit to your network design. They are more reliable as every connector has been individually tested for the labeled specification.
Features
| -- Low Insertion Loss-- Good Durability-- High Return Loss-- Standard Telcordia GR -326 Core-- Zirconia Ferrule material in connectors |
| Four sizes to cover connector dimensions from 5mm to 60mm diameter |
| - FMC 1: | 1/4 - 3/8 - 1/2 | |
| - FMC 2: | 7/8 - 1.1/4 | |
| - FMC 3: | 1.1/4 - 1.5/8 | |
| - FMC 4: | 1.5/8 - 2.1/4 |
| Driving Heads / Studs / Tips / Dowell PinsMade from High Tensile Steel to ensure force from power hammer.Dowell Pins are also made from High Grade Brass. |
a) Solid Copper Earth Rods
Copper Strips, Plates and Solid Rods are manufactured from highly conductive EC Grade Copper. They offer great resistance to corrosion. They are ideally used in applications where the salt content in the soil is very high.
Size :16mm - 2Omm (length as per customer specifications).
b) Swaged Earth Rods (250 Microns)
c) Copper Bonded Earth Rods
They are manufactured from Structural Quality High Tensile Steel Grade 43A to BS 4360. These rods are molecularly bonded with pure EC Grade Copper (99.9%).
Optic Joint Enclosures & Termination boxes are suitable for holding fusion splicing, patch cords, pig tails and splitters. They have routing guide, splice tray and protection sleeves to avoid their exposure to dust & moisture. Bamboo Termination Boxes are Rust, Termite & Rodent Resistant
Features
Wall Mountable
Splicing Tray
ABS Housing
Splice tray
Protection Sleeves
Stellar offers a broad range of adapters like FC, SC, ST, LC, MU, MTRJ, Biconic and Hybrid Adapters. All come with a choice of Zirconia Split Sleeve or phosphor bronze sleeve and with a typical insertion loss of 0.1dB.
| Effective on all types of fire. |
| - Very easy to handle in case of an emergency due to easy push button operation and compact size and light weight. |
| -100 % reliable due to pressure gauge facility and 7 years shelf life. |
| -Maintenance is restricted only till observing the pressure gauge . |
| -Does not cause any post fire damage due to moisture resistant silicon coatedchemical. |
| -Very economical due to low maintenance and refilling period of 7 years. |
| -Provided with a unique GLOW-IN-DARK systems to enable visibility of cylinder intotal darkness(electric supply is cut-off in case of fire emergency). |
On the left is shown a 19 Microwave Rack.
These racks are manufactured and supplied by us to various telecom companies in India.
This open frame rack, made of steel, is designed for mounting 19" communication equipment and patch panels. Supplied in a flat pack, easy to assemble, this open frame rack offers all-round accessibility.
These racks are duly electroplated for better conductivity and then powder coated.
Also supplied along with is a set of various Nuts and Bolts for its assembly.
We supply heavy duty anchor fasteners for its mounting on the floor.
| |||
Bulkhead Attenuator utilize a wavelength sensitive neutral density filters. Specify for 1310nm and 1550nm operation. Available in SC, ST, FC for 5dB, 10dB, 15dB, 20dB, 25dB, 30dB values.
Other values available on request.
Variable attenuator (Clip-On type) is a completely passive device which works by physical attenuation of a 3mm jacketed Singlemode cable. It can be attached at any point in a cable providing attenuation levels from 0 to >47dB at 1550nm, 0 to >21dB at 1310nm and low back reflection. Good for several uses.
FAN out length available in 24 or36 inches with your choice of connectors. Applications include terminating ribbon fiber to patch panels and enclosure.
Contact for custom fanout length, specifications and pricing.
LED Aviation light single, die-cast aluminium alloy housing with polycarbonate
| Aviation light single, for incandescent lamp, die-cast aluminium alloy housingwith polycarbonate dome. |
| Aviation yellow Painted die-cast aluminium alloy housing, with buit-in 75VAstep up transformer, heat resistant, clear thick glass and accessories. |
Built to your specifications, Simplex/ Duplex patch cords with FC, DIN, LC, MU, MTRJ, SC, ST, D4, Biconic, SMA, E-2000 Connectors are available for either Multimode or Single mode systems. Upon request, we will colour code duplex patchcords for easier identification. Stellar patch cord represents high quality, very low loss and maximum performance. A test data sheet can be included with every order upon customer request.We can supply patchcords with your company name printed on the cables at an extra charge.
Note: Stellar patchcords are supplied with orange jacketed multimode (50/125um or 62.5/125um) fiber or yellow jacketed single mode fiber
|
| Stellar Marine Plywood is manufactured from special hardwood veneer and is bonded with undiluted Phenol Formaldehyde Resin at extremely high temperature and pressure. Therefore, this plywood can take extreme changes in temperature, humidity and alternate wetting and drying which are all the prerequisites for plywoods used in marine applications. Being powder proof it guarantees protection against borer & termites. Due to its nature of application it is made to resist fungal and micro bacterial attacks also. This marine plywood is strong enough to withstand excess load, thrust and vibrations. It is dimensionally stable and an ideal choice for high quality projects. |
| Suggested Areas of Application: Used in centering, shuttering and in concrete columns. Repair, construction & maintenance of marine, river crafts, pontoons, dinghies, fishing & sail boats, etc. Additionally it can be used in heat exchangers, public hoardings, sign boards, tea weathering troughs, cooling towers & jetties. Also of extensive use in tanks carrying liquid chemicals, portable cabins, shelters exposed to severe conditions as well as structural applications. |
|
S. No |
Test |
Test Results |
|
1. |
Moisture Content |
7.2% |
|
2. |
Glue Shear Strength in Dry Condition |
1450 Newton 1700 Newton |
|
3. |
Glue Shear Strength after Wet Condition |
1250Newton 1420 Newton |
|
4. |
Glue Shear Strength in mycological test |
1120 Newton 1300 Newton |
|
5. |
Tensile Strength |
|
| |||||||||||||||||||||||||||
|
Conductors:The conductors, drawn from bright electrolytic grade copper, are annealed and bunched together.
Insulation:Brunched conductors are insulated with specially formulated, in-house developed PVC compound with high insulation resistance values. The insulation process is carried out on model high speed extrusion lines with high accuracy, ensuring consistency in performance.
Sheath:in case of multicore cables, the insulated cores are laid up to from the core assembly. The inner cores are coded for ease of identification as per National/international coding practices. The sheathing is provided with specially formulated PVC compound to facilitate not only easy in stripping but also to withstand mechanical abrasion whole in use
Quality Control:High quality standards are built into every product. Right tests and checks at every stage, from raw material through manufacturing stages and finally upto the finished product ensure that cable meet National/International standards, and consumer approval.
PVC insulated single core and multicore sheathed cables are manufactured as per IS 694/1990, in sizes from 0.5 sq. mm. to 50 sq. mm. in single core, and in sizes 0.5 sq. mm. to 4 sq. mm. upto 5 cores. These sizes carry ISI mark and are duly approver by FIA/TAC. The rest of the sizes generally conform to IS: 694/1990.
