Operations :

• MANUAL : Bare-shaft, hand wheel & Gearbox.
• AUTOMATION : Electric, Pneumatic, and Hydraulic Actuators

Special Features

• The design ensures zero leakage from the valve stem.
• Energy saver to minimizing energy losses due to leakage.
• Operating and maintenance cost is considerably reduced.
• Improve the safety, where is bellows valve has been installed.
• A plug can be connected the bellows to monitor performance.
• Prevent any leakage to meet the international sealing standards.
• Compact design that assure great resistance against piping forces.
• Special design for sensitive control assured for the valve service life.

Shutoff Rating :

Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD.

Special Features :

• Possess good temperature and chemical properties.
• Pumps and compressors or other equipment failures.
• Heat input from associated equipment/ external source.
• The set pressure is unaffected by the valve backpressure.
• The system can be operated at maximum working pressure.
• Failure of a cooling system allowing vapour or fluid to expand.
• An inlet nozzle to be connected to the system requiring protection.
• Inherently Safe Design simply can’t eliminate every pressure hazard.

Shutoff Rating :

Zero Leakage for Soft Seated & Metal Seated as per API 598 or STD.

Special Features :

• The design complies with API 6D, API 599.
• Blowout-proof Shaft.
• Tight sealing and low operating torque, Cavity free.
• Minimises problems while in servicing and installation.
• Easy in-line adjustability.
• Actuator mounting pads to ISO 5211.

Shutoff Rating :

Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD.

Special Features :

• Strainers come in various shapes and sizes, with their names designed in accordance with their structures.
• They are mostly made of aluminum and copper which makes them suitable for use with water and makes them corrosion-resistant.
• The most commonly used strainers are Y & Pot strainers.

Special Features :

• Improved and simplified seal installation.
• Excellent shearing action in fibrous fluid mediums.
• Allow easy field retrofitting of various product lines.
• Minimises problems while in servicing and installation.
• Assured performance irrespective of flange torque load.
• No need to remove actuator for replacing ball and shaft.
• Smaller bolt helps avoid bolt stretch and leakage in case of fire.
• Service life of valve is extended in the worst erosive environments.

Shutoff Rating

Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD.

We are known to be among the prime Suppliers of Manual Ball Valve in India. The Manual Ball Valve that we supply is available in various specifications so as to meet the clients requirements. Characteristic

• Highly durable
• Low maintenance cost
• High efficiency
• East to operate

Materials used for making the body valve : Carbon Steel, Chrome-moly Steel, Stainless Steel, Monel, Alloy20, Hastelloy B/C, PP, Teflon etc., Teflon Lined or Teflon Metal Housed.

Special Features

• Tight shut-off obtained against any differential pressures.
• High rangeability, characterization, and precise modulation.
• Allows to use fast actuating to perform emergency operation
• High capacity unrestricted flow passage in fully open position.
• Special design for sensitive control assures that scraping action.
• Compact design that assures great resistance against piping forces
• Special design for sensitive control assured for the valve service life
• Low emission to meet Fugitive Emission & “TA-Luft” requirements

Versatile Range:

• Single, two and three piece constructions
• Full-bore and regular-bore designs
• Soft and metal-seated
• Offered in carbon steel, stainless steel and duplex stainless steels
• Screwed, socket-weld and flanged ends
• ASME classes up to 2500
• Variety of actuated options

Operations :

• MANUAL : Bare-shaft, hand wheel & Gearbox.
• AUTOMATION : Electric, Pneumatic, and Hydraulic Actuators

Special Features

• The design ensures zero leakage from the valve stem.
• Energy saver to minimizing energy losses due to leakage.
• Operating and maintenance cost is considerably reduced.
• Improve the safety, where is bellows valve has been installed.
• A plug can be connected the bellows to monitor performance.
• Prevent any leakage to meet the international sealing standards.
• Compact design that assure great resistance against piping forces.
• Special design for sensitive control assured for the valve service life.

Shutoff Rating :

Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD.

Special Features :

• Possess good temperature and chemical properties.
• Pumps and compressors or other equipment failures.
• Heat input from associated equipment/ external source.
• The set pressure is unaffected by the valve backpressure.
• The system can be operated at maximum working pressure.
• Failure of a cooling system allowing vapour or fluid to expand.
• An inlet nozzle to be connected to the system requiring protection.
• Inherently Safe Design simply can’t eliminate every pressure hazard.

Shutoff Rating :

Zero Leakage for Soft Seated & Metal Seated as per API 598 or STD.

Special Features :

• The design complies with API 6D, API 599.
• Blowout-proof Shaft.
• Tight sealing and low operating torque, Cavity free.
• Minimises problems while in servicing and installation.
• Easy in-line adjustability.
• Actuator mounting pads to ISO 5211.

Shutoff Rating :

Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD.

Special Features :

• Strainers come in various shapes and sizes, with their names designed in accordance with their structures.
• They are mostly made of aluminum and copper which makes them suitable for use with water and makes them corrosion-resistant.
• The most commonly used strainers are Y & Pot strainers.

Special Features :

• Improved and simplified seal installation.
• Excellent shearing action in fibrous fluid mediums.
• Allow easy field retrofitting of various product lines.
• Minimises problems while in servicing and installation.
• Assured performance irrespective of flange torque load.
• No need to remove actuator for replacing ball and shaft.
• Smaller bolt helps avoid bolt stretch and leakage in case of fire.
• Service life of valve is extended in the worst erosive environments.

Shutoff Rating

Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD.

We are known to be among the prime Suppliers of Manual Ball Valve in India. The Manual Ball Valve that we supply is available in various specifications so as to meet the clients requirements. Characteristic

• Highly durable
• Low maintenance cost
• High efficiency
• East to operate

Materials used for making the body valve : Carbon Steel, Chrome-moly Steel, Stainless Steel, Monel, Alloy20, Hastelloy B/C, PP, Teflon etc., Teflon Lined or Teflon Metal Housed.

Special Features

• Tight shut-off obtained against any differential pressures.
• High rangeability, characterization, and precise modulation.
• Allows to use fast actuating to perform emergency operation
• High capacity unrestricted flow passage in fully open position.
• Special design for sensitive control assures that scraping action.
• Compact design that assures great resistance against piping forces
• Special design for sensitive control assured for the valve service life
• Low emission to meet Fugitive Emission & “TA-Luft” requirements

Versatile Range:

• Single, two and three piece constructions
• Full-bore and regular-bore designs
• Soft and metal-seated
• Offered in carbon steel, stainless steel and duplex stainless steels
• Screwed, socket-weld and flanged ends
• ASME classes up to 2500
• Variety of actuated options