Sukum Impex

Beawar, Ajmer, Rajasthan

Mica recovered by means of hammer crushing, processing and screening of crude mica having an average area Black-Spotted-Mica-Scrapbetween 12 to 50 mm sq. (12 to 2 inch sq.) is defined as Mica Scrap. All Mica Scrap are substantially free from mineral and non-mineral impurities as well as other foreign inclusions. It is exported to plants all over the world and finds paramount use as a primary raw material in the manufacture of mica paper or re-constituted mica. Domestically, Mica Scrap is used as a basic material for the manufacture of Ground Mica Flakes and Powders. It is also widely used to make mica paper.

• K2O0.001% +-/ 0.001%
• Al2O30.35% +/- 0.5%

• Compression Strength350 Kg./m3
• Sintering Porosity1200oC

Potassium feldspar powder deposits comprise two major parts Plagioclase Feldspar and Alkali Feldspar. The composition of Plagioclase Feldspar falls under Albeit and Anorthite, whether Alkali Feldspar falls between Albeit and Orthoclase. Alkali Feldspar has a wide range of Industrial uses due to the contamination of Alkalis like Oxides of Potassium & Sodium and Alumina. Due to these properties, Feldspar plays vital role as fluxing agent in Glass and Ceramic applications and can be used as filler in rubber, plastic, paint and adhesive industries. Alkali Feldspars can be further categorized in three categories Potassium Feldspar, Sodium Feldspar and Mixed Feldspar.

Our product China Clay is basically in the category of Kaolinite group. We have a excellent quality of this product and known worldwide for a large volume supplies. PHYSICAL PROPERTIES It has good plasticity, does not smell in water, stand high temperature and non-conductor of electricity and heat. The white color and the brightness are the other properties. SPECIALITY It is marketed as super-textile, paper, pottery and rubber grades. The grading of the material is primarily done on the basis of whiteness and grit content. The clay lumps first made to slurry with water. Then led off to sand classifier for separation of sand and then to settling tanks for sedimentation and thickening. The obtained clay is dried in rotary indirectly fired driers. APPLICATION It is used in manufacturing of porcelain and chinaware. For this purpose we prefer grit free china clay with some tolerance. It is also utilized in manufacturing of electrical insulators. China clay free from silica and unaltered feldspar is used for electrical insulators. For electrical insulators iron content as low as possible in used china clay. It is also used in production of crockery and paint industry. All users prefer china clay with some tolerance depending upon the end products to be manufactured. In Pharmaceuticals and cosmetic industry china clay is used. They use froth free china clay i.e. the presence of lime should be practically nil. It is used as filter in paper and textile industry. For giving a glaze on paper or textile the colour reflectance of china clay should not be less than 88. It is utilized in large quantity as filler and reinforcing agent in rubber goods. China clay has light weight and possessing reinforcing properties and should be absolutely free from copper even in minute amount deleterious for rubber.

We produce very good quality of Magnesite, please see theElectro-Fused-Magnesite chemical specification of the product:

Feldspar is holding the major deposits of the earth’s crust, almost 60% of total deposits from the earth. Feldspar deposits comprise two major parts Plagioclase Feldspar and Alkali Feldspar. The composition of Plagioclase Feldspar falls under Albeit and Anorthite, whether Alkali Feldspar falls between Albeit and Orthoclase. Alkali Feldspar has a wide range of Industrial uses due to the contamination of Alkalis like Oxides of Potassium & Sodium and Alumina. Due to these properties, Feldspar plays vital role as fluxing agent in Glass and Ceramic applications and can be used as filler in rubber, plastic, paint and adhesive industries. Alkali Feldspars can be further categorized in three categories Potassium Feldspar, Sodium Feldspar and Mixed Feldspar. APPLICATIONS Glass: Potassium Feldspar plays very important role in glass manufacturing. The alkali part of potassium feldspar acts as a flux, and thus it is being used as fluxing agent in glass manufacturing whether it is scientific glass, TV Picture Tube, Float Glass, and any other glass products. The Basic and Vital ingredient in manufacturing the glass is Quartz but Potassium Feldspar is to reduce the melting temperature of quartz which reduces the production cost. These types of industries usually demand Potassium Feldspars in Granular form, but the sieve analysis varies by industry to industry. Ceramic: Due to its fluxing property it is also used in ceramic wall and floor tiles manufacturing. It is used in ceramic body and sometimes in Glazes manufacturing due to its strength and hardness. Second vital content in Potassium Feldspar – Alumina provides strength of to the body. This type of industries normally uses Potassium Feldspar in Powder form between 200-300 mesh BSS. But nowadays some big industries have started using grits form also. Sanitary ware: Same as Ceramic it forms the body part of sanitary ware products. These industries use the powder form of Potassium Feldspar. Others: Feldspars are being used by other industries like paint and plastic, these types of industries require fine mesh of this product.