Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

SE

Sumitron Exports Private Limited
location Rohini, Delhi

Write a Review
Call Now Call Now

Our Products

  1. Dispensers 5 Products available
  2. Soldering Machines & Accessories 5 Products available
  3. Soldering Accessories 4 Products available
  4. Soldering Equipment 3 Products available
  5. Hand Tool 3 Products available

  6. Measuring Instruments & Equipment

    2 Products available

  7. Screwdrivers

    2 Products available

  8. Adhesive Dispensing Equipment

    2 Products available

  9. PCB Modules & Circuit Boards

    1 Products available

  10. Living Room And Plastic Furniture

    1 Products available
  11. Others Products 29 Products available

Our Products

Our product range contains a wide range of BGA Rework Machine, Multi-layer Sticky Floor Mats, Plastic Soldering Thermometer, Cleaning Validation Kits and Paste Mixer

Hot Melt Glue Gun

Hot Melt Glue Gun
  • Application Using in form to paste
  • High Temp. 193°C (380°F), 165°C (330°F)
  • Low Temp. 120°C (248°F), 105°C (220°F)
  • Glue Stick Size Ø11~12mm, Ø8mm
The Homeease Hobby Style Glue Gun is a very easy to use hot melt glue gun. It comes with a highly efficient PTC heater. The heater heats the glue. Melted glue follows out of the silicon nozzle. It is used for daily adhesive requirements such as, hobbies; craft and small do it yourself projects.
Ask Latest Price & Details
Terminal Crimping Tools

Terminal Crimping Tools
The KST Crimping Tools are used in various applications. They can be used with various terminals. They can be used with insulated and non-insulated terminals. They work with double crimp ring, spade, and pin terminals. They can be used with single crimp tool with insulated male and female connectors. Insulated crimp flag terminals, Amp-type flag terminals and Cord end terminals can also be used with crimping tool. The crimping tool can be used with RG585962, BNCTNC COAX and RJ45 connectors. It also works with aluminum and copper lugs.
Ask Latest Price & Details
Torque Meter

Torque Meter
  • Accuracy Within ±0.5%
  • Power Supply 1.2V batteryX5
  • Dimensions (mm) 123X230X65(H), 130X80X34(H)
  • Weight (kg) 20KG, 15KG
The Kilews Torque Meters are used to measure torque in a shaft. It measures the amount of twist in the calibrated length of the shaft. It enables setting the torque ranges. A LED indicator glows if the measured torque is not in the specified range. It can be connected to a computer using the USB 1.0 connector. The data of the measured torques can be transferred to the computer using USB connection. It can be automatically reset to zero value after every reading. It measures the maximum, minimum, and mean torque values automatically.
View Complete Details
Ask Latest Price & Details
Wire Stripping Tools

Wire Stripping Tools
  • Weight 1.2kg
  • Output voltage AC 24V
  • Dimensions 80(W)×130(H)×131(D)mm
It is used to strip electrical insulation from wires. It removes insulation very cleanly even for components such as PTFE. It easily cuts insulation of single wires. It has a standard HAKKO FT 8002 handpiece. It has three replaceable blades. Interchangeable blades allow working with wires of different diameters. The maximum wire diameter supported is 12mm. It has a power save mode which cuts power to the blades by 50% when the handpiece is placed in the holder.
Ask Latest Price & Details
Floor Mops

Floor Mops
The Texwipe Mops are specially designed mops for cleanrooms. The mops covers are made of 100% knitted polyester. The covers have high absorbency, good abrasion and chemical resistance, and have very low contamination levels. The mop covers can be sterilized and disinfected before use in cleanroom environment. The mop head can be easily replaced. Pre-wetted refills of mop cover are also available.
Ask Latest Price & Details
Work Benches

Work Benches
  • Size (mm) 700 x 1200, 700 X 1500, 700 X 1800
  • Load Capacity 300 kg, 150 kg
The Treston Adjustable Workbenches TPH SAP is a modular workbench used in assembly and production lines. The workbench is available in both regular and ESD variants. The height of the workbench can be adjusted manually using an allen key. The height can be adjusted between 650 and 900mm. The workbench is available with a pair of upright profile and a shelf. The height of the shelf can be adjusted between 1080 and 1550mm. The load capacity of the shelf is 50kg. The steel frames of the workbench are powder coated with epoxy in light gray RAL 7045. The workbench top is of 26mm thickness and is ESD laminated.
Ask Latest Price & Details
Electrostatic Charge Meter

Electrostatic Charge Meter
  • Power 9 V, 6F22Y
  • Size 4 7/8" L x 2 7/8" W x 1" H [123mm L x 73mm W x 25mm D]
The Simco FMX-004 is an electrostatic field meter. It is used to locate and measure static charges. It is very compact, pocket size and simple to use. It has the following functions which are operated by pushbuttons: Power onoff, Zero adjustment, Ion Balance and Hold. Use the hold button to retain the display of the reading. It tests for positive and negative polarity up to + 30.00 kV at a distance of 1inch. It has two LED lights which are used to correctly position the field meter from the object. The results are displayed on a LCD monitor. The results are also displayed as bar graphs: positive polarity is displayed as red and negative polarity as blue. It also displays error messages and battery capacity. The field meter can also use air ionization to measure the static charges. For accurate results the field meter is well-grounded.
View Complete Details
Ask Latest Price & Details
Automatic Screwdrivers

Automatic Screwdrivers
The Kilews models SK-2205LS, SK-2215LS, SK-2225LS, SK-2235LS, SK-2245LS, and SK-2225LSF are semi-automatic clutch type electric screwdrivers. The screwdriver has an AC brush type motor. It does not require an adapter. It is light weight, ergonomically designed, handy and easy to use. It boosts productivity. Power ONOFF with a trigger switch.It provides precise torque to ensure proper tightening of screws.
Ask Latest Price & Details
Cable Tie Tensioning Tool

Cable Tie Tensioning Tool
  • Width 2mm - 4.8mm
Giantlok Cable Tie Tensioning Tool is an allmetal construction cable tie gun for tensioning and cutting of cable tie. All Metal Construction Cable Tie Gun For Tensioning and Cutting of Cable Tie.
Ask Latest Price & Details
Cleanroom Wipers

Cleanroom Wipers
ITW Texwipe offers a family of blended general purpose nonwoven wipers for cleaning and spill control in critical environments. TechniCloth, TechniCloth II, VersaWipe, and BlueWipe all consist of hydroentangled cellulose and polyester fibers. This blend combines the high sorption of natural cellulose and the cleanliness and strength of polyester. These cleanroom wipers are ideal for ISO Class 6 and 7 cleanrooms, gowning areas, isolators, anterooms, and buffer areas. Texwipe offers these wipers in several forms: dry, pre-wetted, sterile wet and dry, and as mop covers.
Ask Latest Price & Details
ESD Chair

ESD Chair
The Treston Chairs are ergonomically designed for comfortable working in workstations. The chairs are available with good upholstery. The seat and back of the chairs is cushioned with polyurethane. The chair includes various good features, such as, adjustable seat and backrest height. The seat and backrest tilt can also be adjusted. Chairs are ESD safe. Chairs can be easily assembled. Different types of chair are available with various features. Some chairs have a good syncro tilt-mechanism, which allows adjusting the angle of the seat and back using a lever and body weight. Some chairs have a foot rings. The chairs can have foot glides or castors. The swivel castors in the chairs have brakes, which can be locked when the chair is not in use.
Ask Latest Price & Details
Tool Storage Systems

Tool Storage Systems
  • capacity 50kg, 400kg
This unit consists of a combination ball bearing base baseplate and dividing trays and top plate and will hold 12 small parts storage cabinets 551554 ESD in three layers. Each layer contains four cabinets which are ordered separately. The Spacemiser consists of two smaller storage cabinets of heights 290mm and 550mm. It can be mounted on wall, worktop, or on a turntable to enable smooth rotation. It is ESD safe. It is available with an earthing cable.The Spacemiser is available in two variants: Spacemiser 12-550 ESD and Bench top Spacemiser PTP-5 ESD.
Ask Latest Price & Details
Desoldering Stations

Desoldering Stations
  • Dimensions 190(W)×140(H)×220(D)mm
a soldering and desoldering system. It consists of a ceramic heating element and has a temperature range of 380 Degree Celsius to 480 Degree Celsius. It is a perfect option for dual mode operations. Due to its dual mode it utilizes minimum bench space so that you can use your bench space efficiently without working for the size of this equipment. You can also combine this system with N2 system to reduce soldering defects. You can easily replace nozzles in this device and use the ones that well known in the Hakko series.
Ask Latest Price & Details
Torque Wrench

Torque Wrench
The Kanon Torque Wrenches are used to tighten fasteners using specified torque values. The Dial Indicator Torque Wrenches (TOK) has a dial to read torque values. They are used for general tightening, and in regular maintenance and inspection operation. The Adjustable Ratchet Torque Wrenches (QLK) enable fastening with any torque value in the specified range. It allows easy replacement of sockets which allows working with fasteners of different sizes. The other side can be used to loosen the fasteners. The Adjustable Wrench Head (HYK) has a reversible head which enables it to be used in difficult to reach places. The Pre-Set Ratchet Torque Wrenches (QSPK) fastens using the pre-set torque value using square drive ratchets. It is suitable for repetitive jobs. The Pre-Set Torque Wrenches (SPK) gives an audio indication, the Click sound when pre-set torque value is reached. The Marking Torque Wrenches marks the fastener after Click sound. The Pre-Set Ring Torque Wrenches (RSPK) has a 45-degree offset in its head allowing it to be used in difficult to reach places.
View Complete Details
Ask Latest Price & Details
ESD Mat

ESD Mat
The Sumitron ESD mats are used on floor to prevent damages to electronic equipment from electrostatic discharges. ESD control is required during the manufacturing and assembly of electronic components. Operator actions such as, walking, moving chairs, and so on causes generation of static discharges. The mat is made of three layers of homogenously constructed solid polyvinyl chloride with a layer of conductive fleece in between. This composition provides very good physical and electrical properties. The mats have very good resistance to degradation by inorganic acids, organic acids, reducing agents, detergent solutions, alcohols, aliphatic hydrocarbons, mineral oil, amines, and aldehydes. QUICK ENQUIRY
Ask Latest Price & Details
Smt Machine

Smt Machine
  • Count Capacity -99999 ~ 99999
  • Electric Power AC110V(60HZ) / AC220V(50HZ)
  • Weight 10 Kg
  • Outer Dimensions L×W×H(mm) 350×774×184 mm2
An automatic SMD chip counter that helps in stock management for increased efficiency. It is equipped with an internal power supply for back up during power failures. Fully automatic component counter is ideal for counting chips with great precision and accuracy and simple to operate.It has a count capacity of -99999 to 99999. The presence of internal power backup helps in sustaining system during blackout.
View Complete Details
Ask Latest Price & Details
Pneumatic Screwdriver Bits

Pneumatic Screwdriver Bits
The bits are ideal for use with impact pneumatic and electrical drivers in high torque applications. These are manufactured with great dimensional accuracy to ensure correct engagement with mating drivers models across Japan and other International markets. The bits are made with S2 steel and heat treated in controlled environment to maintain durability and longer life.
Ask Latest Price & Details
BGA Rework Machine

BGA Rework Machine
Possible to make full-scale thermal profiles with 6-zone hot air and a bottom heater. Possible to measure and record temperature of components and PWB with type K thermocouple. The dedicated software to link a station and a computer for easy and quick settings. Easy data transfer through an USB cable
Ask Latest Price & Details
GLUE GUN

GLUE GUN
The Homeease Hobby Style Glue Gun is a very easy to use hot melt glue gun. It comes with a highly efficient PTC heater. The heater heats the glue. Melted glue follows out of the silicon nozzle.
Ask Latest Price & Details
Solder Wire

Solder Wire
For these solder formulations, we represent and support the worlds best brand Kester from USA. Mostly available from stock, these formulations help your product to compete in the World market with ease.
Ask Latest Price & Details
Multi-layer Sticky Floor Mats

Multi-layer Sticky Floor Mats
  • Color White
  • Pattern Plain, Multi-layer
  • Material PP
  • Coating Adhesive
Ask Latest Price & Details
ESD Dotted Gloves

ESD Dotted Gloves
  • Color White
  • Gender Men's, Women's,
  • Wear Type Full Fingered
  • Style Plain, Striped
Ask Latest Price & Details
Video Inspection System

Video Inspection System
  • DIA 106x152mm
There are two Advanced Video Inspection System from our Principals SharpVue, USA that are used world-wide for a host of their user-friendly features. Built in 3-megapixel high resolution camera & 3-quadrant LED lighting system. The touch screen feature provides ease in annotation and measurement of job under supervision. The ViTiny UM08 is an autofocus digital microscope. It is used for inspection on production lines. It provides a magnification of 12x 132x on a monitor of 21.5inches for every 4x lens. It gives an HDMI output of 1080P. The IR remote control can be used to change the focus from manual to auto and vice-versa. It has 30 pieces of built-in LED lights which allow adjustment of brightness. It has a 2 mega pixel CMOS sensor. It has an in-built light socket. It has a shutter which can be opened and closed depending on the lighting. It has a defog function which is used to manage the contrast of images in real time. It has functions such as wide dynamic range (wdr), noise reduction, detection of moving objects, and so on. It has a rotary mirror to rotate images. It can zoom in and out to resize images. It also enables reversing of images. It also has an image stabilization system.
View Complete Details
Ask Latest Price & Details
Plastic Soldering Thermometer

Plastic Soldering Thermometer
  • Display LED
  • Power Source Battery
  • Material Plastic
  • Wire Sensor Dia.0.2mm
  • Automatic Grade Automatic Shut Off
Ask Latest Price & Details
soldering iron

Soldering Iron
  • Model No FX 600
  • Power Consumption 50 W
  • Temperature Range 200-500 deg C
  • Temperature Stability 1 deg C at idle temp
  • Tip to Ground Resistance Less Than 2 ohm
  • Tip to Ground Potential Less than 2 mv
  • Heating element Ceramic Heater
  • Total Length 233 mm (with B tip)
We are the leading manufacturers, exporters and supplier of this products.
View Complete Details
Ask Latest Price & Details
Radial Lead Cutting Machine

Radial Lead Cutting Machine
  • Voltage 220 V
  • Dimensions 240 x 165 x 210 mm
  • Frequency 50 Hz
Ask Latest Price & Details
Dispensing Robot

Dispensing Robot
  • Color White
  • Features Easy Program Teaching, Versatile Multi-purpose Robot
  • Position Repeatability 0.01mm
  • Led Light Color Red
Ask Latest Price & Details
Cleaning Validation Kits

Cleaning Validation Kits
  • Size 250 - 500 g
  • Packaging Type PP Boxes
  • Contamination Chances Very less
  • State Solid, Liquid
Ask Latest Price & Details
Trinocular Microscopes

Trinocular Microscopes
The microscope features the latest optical technology to provide clear and sharp images with a zoom ratio of 7.50:1 over the entire field of view at all magnification levels. To further enhance workability its newly developed DHW10x eyepiece with tilting head feature and rubber eye guards increase the operator comfort and performance.The third vertical tube with diopter provides following additional functionality to the microscope :- for connecting camera (using C-mount adapter) to record images and for a simultaneously second viewer access to an under observation specimen
Ask Latest Price & Details
Humidity Cabinet

Humidity Cabinet
series is a basic type of super dry cabinet. It is very useful for dry storage. It has a patented drying technology. It is available in three model types: SDB 151-21, SDB 1104-21, and SDB 1106-21. The models have different cabinet sizes. Depending on the cabinet size the numbers of shelves available changes. The shelves are painted with ESD material. These cabinets do not have door contact alarm. They do not have humidity alarm which indicates change in humidity levels. A digital panel displays the humidity levels and temperature.
Ask Latest Price & Details
Conformal Coating

Conformal Coating
conformal coating to protect electronic circuits against rough environment that may contain moisture andor other chemicals. The transparent coating is generally 25-75m thick and dries quickly after application.
Ask Latest Price & Details
floor wiper

Floor Wiper
The Texwipe Mops are specially designed mops for cleanrooms. The mops covers are made of 100% knitted polyester. The covers have high absorbency, good abrasion and chemical resistance, and have very low contamination levels. The mop covers can be sterilized and disinfected before use in cleanroom environment. The mop head can be easily replaced. Pre-wetted refills of mop cover are also available.
Ask Latest Price & Details
Automatic Screw Feeder

Automatic Screw Feeder
Superior transportation facilities, efficient workforce and on-time delivery of the products make us stand out from the crowd. Headquartered in Delhi(India), we are making available high quality products to every nook and corner of the country.
Ask Latest Price & Details
Air Ionizer

Air Ionizer
  • Weight 16 lbs. (7.3 kg.)
  • Size 42.75" x 4" x 6.75" (W x H x D)
The Simco-Ion Aerostat Guardian is an overhead ionizing blower. It is used in testing of semiconductors, assembly lines for electronic components, and in assembly and packaging of medical devices. It provides a fast decay of static charge in a given work area. It comes with task lighting, a heater, and a light indicator for the ionization process. It effectively protects components against ESD. It is available with Simco-Ions patented technology of inherent balance and built-in emitter point cleaners for each fan. It works on AC technology.
Ask Latest Price & Details
PCB Chemicals

PCB Chemicals

A variety of high quality chemical from our Principals Electrolube, UK available in our stock for use in multiple industries.
Ask Latest Price & Details
Screw Tightening Machine

Screw Tightening Machine
The Nitto Seiko FM503H series is an automatic screw feeder used to fasten screws. It uses pneumatic pressure to feed the screws from a hopper storage to the air feed system. It has a filter plate that ensures screws of correct shape are fed. The screws from the air feed system are held on the driver tip by a chuck. Maximum of 30 screws can be continuously fed for manual fastening. It can be used to fasten rivets, studs, bolts, and hammering nails or threaded rivets.
Ask Latest Price & Details
Solder Ingot

Solder Ingot
For these solder formulations, we represent and support the worlds best brand Kester from USA. Mostly available from stock, these formulations help your product to compete in the World market with ease.
Ask Latest Price & Details
Soldering Pot

Soldering Pot

Select able heating programs for different solder alloys. Precise digital temperature control. Special coating for long life.
Ask Latest Price & Details
Paste Mixer

Paste Mixer
Solder paste mixers having powerful mixing capacity and microprocessor based precision time control. The equipments are almost free from lubricated maintenance.
Ask Latest Price & Details
Optical Inspection System

Optical Inspection System

We represent some of finest companies in the world for offering state of art inspection system from Carton, Thailand to our valued customers.
Ask Latest Price & Details

ESD Flooring

The Sumitron ESD tiles are used to dissipate static from floor. This protects sensitive equipment. A lifetime warranty is provided against generation of static on these tiles. The tiles are available in various patterns and designs. They are available in standard sizes: 600 X 600mm, 610 X 610mm, and 900 X 900mm with thickness of 2mm and 3mm. The tiles are resistant to 5% of acetic acid, hydrochloric acid, nitric acid, ammonia solution, and ethyl alcohol. They are also resistant to soyabean oil, kerosene, cement paste, milk, and soy sauce.
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.