Fuel Monitoring System

DIFMACS is designed using Micro Controller to monitor fuel levels in real-time. It interfaces with Level sensor through 4-20mA signal and compute the fuel level accurately. The system can also be programmed for tanks of various shapes and profiles. The tank profile information can be programmed through the keyboard interface provided on the console. It communicates the measured values in litres to external devices through the built-in communication port. This facilitates remote monitoring of Fuel levels from a central site. The built-in 7segment LED display assists is monitoring the fuel level locally. The system is designed in with 3 relay outputs for alarm indication for High Medium Low fuel levels.Built-in key pad for programming tank profiles after password validation.

View Complete Details

Ask Latest Price & Details

Engine Safety Unit

The GSU-904 is a Manual Generator Safety Unit designed to take care of the safeties of the engine. The Engine can be started from the key switch which is connected to the starter motor through the Generator Safety Unit. The generator can be started only if the sane is permitted by tge Generator Safety Unit. After ensuring inner functions of all safeties, the engine is allowed to be started through key switch or externally.14"7Segment RED LED Display to view the RPM.Screw type terminals for connecting all Engine Safeties.

View Complete Details

Ask Latest Price & Details

AMF Controller

The AMFR-904 is an Auto Mani Failure Relay that offers excellent range of engine monitoring and protection features. This microprocessor-based controller includess 8 push-buttons, 19 LED lamps, 3-digits of 7segment LED display, 8 relay outputs, 9 digital inputs, 20 programmable parameters, Hour-meter and 2 operating modes. The module has been designed to monitor engine temperature, low oil pressure, fails to start, fails to stop, charge failure, over speed and under speed.

View Complete Details

Ask Latest Price & Details

Fuel Sensor

Feature Built-in key pad for programming tank profiles after password validation.

fuel levels in real-time. It interfaces with Level sensor through 4-20mA signal and compute the fuel level accurately. The system can also be programmed for tanks of various shapes and profiles. The tank profile information can be programmed through the keyboard interface provided on the console. It communicates the measured values in litres to external devices through the built-in communication port. This facilitates remote monitoring of Fuel levels from a central site. The built-in 7segment LED display assists is monitoring the fuel level locally. The system is designed in with 3 relay outputs for alarm indication for High Medium Low fuel levels.

View Complete Details

Ask Latest Price & Details

Alarm Annunciators

Purity Based on the state of the art Micro controller technology.

Alarm Annunciator designed with superior Micro controller Technology. This Annunciator also possess additional feathers on its cap viz., super bright LED facia, universal power supply, convenience to program at site, converging technology for easy maintenance and troubleshooting to take care of very high level of performance standards set by the present Switchgear and Automation Industry. SUN-MICROALARM Annunciator is designed around a popular Micro controller giving you the ultimate flexibility for its intended use without sacrificing the ease of operation and reliability. SUN MICROALARM meets all the requirements of various users from different application segments.

View Complete Details

Ask Latest Price & Details

Generator Control Panel

Features 1/2” 7Segment RED LED Display helps to viewthe Engine Parameters from a long distance.

The Engine Control Panel ECP-905 is a complete digital console for generators to safeguard and monitor key parameters. ECP ensures extended life time of the DG and reduces downtime and maintenance costs and alerts in case of fuel prilferage. ECP allows safe starting of the engine through console or through a remote start output. ECP protects the system by shutting down, the moment it detects violation of safety.

View Complete Details

Ask Latest Price & Details

Battery Charger

Features

It will operate from low line voltage of 150 V AC and Maximum voltage of 300 V AC.
Available in small size.
Maintain constant voltage through out the line voltage variation.
This battery charger protected against the Input voltage, Temparature, Reverse polarity, Over Load.
High Efficiency and Hence Less Heat.
Charger on LED will indicate the charger is ready for charging the battery.
Reverse Battery Led shall glow when Battery is connected in wrong polarity once the Battery is connected properly; this Led is in off state.

Advantages

Trickle Led shall Glow when Battery is connected to the charger. This Led shall be in off condition when the battery is under Boost mode. Once the battery is fully charged, current requirement of battery will comedown and Charger is Trickle mode.
Boost LED shall glow when Battery charger is working under Boost mode. This indicates that energy available at Battery is low and Battery Charger is supplying more than 20% of rated current to battery to keep charging. Under Boost Mode the battery will take normally 8 to 12 hours to charge completely. Once the battery is fully charged Battery charger will go to trickle mode and Boost Led is in off state.

View Complete Details

Ask Latest Price & Details

Intelligent Fuel Management System

DIFMACS is designed using Micro Controller to monitor fuel levels in real-time. It interfaces with Level sensor through 4-20mA signal and compute the fuel level accurately. The system can also be programmed for tanks of various shapes and profiles. The tank profile information can be programmed through the keyboard interface provided on the console. It communicates the measured values in litres to external devices through the built-in communication port. This facilitates remote monitoring of Fuel levels from a central site. The built-in 7segment LED display assists is monitoring the fuel level locally. The system is designed in with 3 relay outputs for alarm indication for High / Medium/ Low fuel levels.

Features

Intelligent controller based design.
Built-in key pad for programming tank profiles after password validation.
RS485 port for external device interfacing.
Remote monitoring enabled.

Advantages

Supports Capacitive type level sensor.
Built-in Relay outputs for Local Indication, Alarm.
LED Indications for monitoring various levels.

View Complete Details

Ask Latest Price & Details

Engine Control Panel

The Engine Control Panel ECP-905 is a complete digital console for generators to safeguard and monitor key parameters. ECP ensures extended life time of the DG and reduces downtime and maintenance costs and alerts in case of fuel prilferage. ECP allows safe starting of the engine through console or through a remote start output. ECP protects the system by shutting down, the moment it detects violation of safety.

Features

Microprocessor based design.
1/2 7Segment RED LED Display helps to viewthe Engine Parameters from a long distance.
Compact Size, Elegant design, easy install.
Designed for Water/Air Cooled Engine.
Suitable for High Speed Engines.
Tamper proof Engine Running Hour counters.
Built-in key switch for ON/OFF control; Push Buttons for Ignition & display scroll control.

Advantages

Push Buttons for ignition & display scroll control.
Hold mode to monitor a particular parameter.
Facility for Remote Start/Stop from PIU/AMF even at a distance of 100Meters.
RS 232 Communication Port-Optional.
Potential Free Contact (PFC) Output for Remote Telemetry.

View Complete Details

Ask Latest Price & Details

Outdoor Type AMF Panel For Telecom Application

This panel is designed to control 2DG's from one location. The double door type of construction enable to install the panel in the open place.

Features

Designed for outdoor mounting
Double Door construction. Inner door is fitted with all control & metering instruments can be viewed from toughened glass fitted on the outer door.
Pad locking arrangement made to keep the panel under lock & key.

Advantages

The prevent the dripping rain water panel is provided with the separate stand. This also facilitate the easy cabling at the time of Installation.
Electrically & Mechanically interlocked Magnetic Contactors for switching the EB/DG Power to Load.
Two separate set of instruments provided for controlling and monitoring the DG sets individually.

View Complete Details

Ask Latest Price & Details

SS Panel For Corrosive Atmosphere

This Alarm annunciation panel is designed for a Gas Dispensing application.

Features

This panel is made out of Stainless Steel.
The Alarm Annunciator used in this panel is of programmable type. Individual window can be programmed for Alarm, Trip & Status functions.

Advantages

Either side of the panel is installed with microprocessor based digital indicator for measuring GAS Flow in the pipe line.

View Complete Details

Ask Latest Price & Details

Scanners

The microprocessor based temperature scanner SUNSACN is available in different models, suitable for RTD, T/C, ma and mv types of input. The Scanner scans all input channels continuously and compares it with alarm and trip settings and generates outputs. The Scanner has two levels of operation.

Operator level permits channel display selection, Auto/Hold mode, alarm acknowledge and dwell time adjustment.

The supervisory level is permitted through password control to adjust Alarm & Trip settings, group configuration, output response adjustment, addition/deletion of channels and many more.

Features

Site programmable.
Dynamic color change for trip and non trip.
Annunciators are also provided with Universal Power Supply ranging from 90 - 270V AC/DC. The Power Supply offers very high noise immunity.
Our Annunciators are tested at ETDC and SAMEER - Chennai for various type tests as per IS 9000 and IEC 255-4.

Advantages

RS 485 communication port available. MODBUS Slave RTU protocol supported.
Window wise NO / NC selection.
Dispensation of DIP switches and can be programmed through Test/Accept/Reset push buttons provided in the panel.
Insertion of legends/changing the existing legends possible from the front, without disturbing the unit.

View Complete Details

Ask Latest Price & Details