Control Valves are used to combine two flows or to divert one flow into two outlets. They are designed to replace and perform the functions of two single ported control valves acting in opposite directions, in converging or diverging liquid flow. They can beused to control the circulation of water, oil, sea water or other liquid in heating or cooling applications involving heat exchanger bypass control. They can also be used in blending systems and on-off selector systems.

Types of valves

• 2 Way Control Valve     
• 3 way Control Valve
• Angle Type Control Valve

Size : 15 NB  to 300 NB 

Dome Valve is a pressure tight compressed air operated valve for handling abrasive, material & slurry mixture without wear & tear. Simple in design & low maintenance. This valve is used in pneumatic conveying systems in different Industries. It is provide positive closure between hoppers and blow tanks. They are capable for cut off moving and satiric column of powder pastes & up to 40 mm particle size. Pressure tight closure is provided by either eccentric shape of the dome and with help of an inflatable seal to prevent leakage. They provides the pressure tight seal against the dome surface when in the closed Position. No wear & tear between dome & seal because sealing action taking place only at the end of closing position.

Details :

• Sizes - 50 NB upto to 500 NB (4'' up to 20'')
• Moc - Cast Iron, cast steel, SS304 , SS310 & SS336
• Opratation - Pneumatic cylinder, pneumatic actuator, motorized.
• Models - Standard & Water cool jacket(for high temp)

Features :

• Full Bore Material Flow
• Cavity Fore Construction
• Fast Closing & Opening
• Low Maintenance
• Long Operating Life Capable of handling fine
• grain materials and head abrasive products.

Material Handles : Ash Powders, Granules, Ores, Minerals, Abrasive, Cohesive Hazardous, Granules Toxic.

Inflatable sealed valve is a pressure tight compressed air operated valve for handling abrasive, material & slurry mixture without wear & tear. Simple in design & low maintenance. This valve is used in pneumatic conveying systems in different Industries. It is provide positive closure between hoppers and blow tanks. They are capable for cut off moving and satiric column of powder pastes & up to 40 mm particle size. Pressure tight closure is provided by either eccentric shape of the dome and with help of an inflatable seal to prevent leakage. They provides the pressure tight seal against the dome surface when in the closed Position. No wear & tear between dome & seal because sealing action taking place only at the end of closing position. Sizes : 50 NB upto to 500 NB (4'' up to 20'')Moc : Cast Iron, cast steel, SS304 , SS310 & SS336Opratation : Pneumatic cylinder, pneumatic actuator, motorized.Models : Standard & Water cool jacket(for high temp) FEATURES : Full Bore Material FlowCavity Fore ConstructionFast Closing & OpeningLow MaintenanceLong Operating Life Capable of handling finegrain materials and head abrasive products.MATERIAL HANDLES :Ash Powders, Granules, Ores, Minerals, Abrasive, Cohesive Hazardous, Granules Toxic

Chinese Dome Valve Spares is a pressure tight compressed air operated valve for handling abrasive, material & slurry mixture without wear & tear. Simple in design & low maintenance. This valve is used in pneumatic conveying systems in different Industries. It is provide positive closure between hoppers and blow tanks. They are capable for cut off moving and satiric column of powder pastes & up to 40 mm particle size. Pressure tight closure is provided by either eccentric shape of the dome and with help of an inflatable seal to prevent leakage. They provides the pressure tight seal against the dome surface when in the closed Position. No wear & tear between dome & seal because sealing action taking place only at the end of closing position.
We are also manufacturing chinese dome valve spare part or chines make dome valve and actuator to suit and interchangeable in any valve.

Details

• Sizes - 50 NB upto to 500 NB (4'' up to 20'')
• Moc - Cast Iron, cast steel, SS304 , SS310 & SS336
• Opratation - Pneumatic cylinder, pneumatic actuator, motorized.
• Models - Standard & Water cool jacket (for high temp)

We are manufactures a wide range of slide gates to suit individual customer requirements and manufactured from both carbon and stainless steels. ISOLATION Gate Valve was designed to provide a quick acting isolation valve unit that can be installed into a bulk handling flow path to stop material flow. Isolation Valves can be equipped with manual or powered actuators, including hand wheel, chain wheel, pneumatic cylinder or electric motor.

We manufacturer of customized isolation valve & Dampers to wild range of Industries : Each unit designed individually to suit each client’s application

Size Range : Up to - 48’’ Or 1200 MM (Square & Round Port) and above on request.

Wild rang of material available for different & typical applications : Carbon Steel, Alloy Cast Iron , Stainless Steel , High Abrasion And Corrosion Resistant Material For Abrasive Application.

Slide Gate Valves are typically used as maintenance discharge valves for bins or silos.These valve are dust proof but they are designed to be used in application without pressure or under pressure. Slide gate valves are simple and compact in design, robust in structure, excellence in technology and are easy to install. The slide plate can be actuated by manual, pneumatic, electric or hydraulic means. The slide plate is supported by frictionless rollers to allow for easy actuation.

Size Range : Up to - 48’’ or 1200 MM (Square & Round Port) and Above On Request

Wild rang of material available for different & typical applications.

Guillotine Damper are most commonly specified when isolation is the primary function of the damper. Guillotine dampers are best-suited for isolation applications where low leakage and pressure drop are important Guillotine dampers and blanking plates can be used in any application where a positive isolation is required for routine maintenance and entry to a duct behind a media source. Guillotines are classified in two styles - Low Leak and Zero Leak. Both styles are ideal for a high degree of isolation while providing low pressure drop when the dampers are in the open position. The basic mechanical elements of the guillotine damper are a blade, a peripheral - seal system to prevent gas leakage at all stages of blade movement, support members for the blade, and a drive to move the blade steadily and continuously from open to closed and back again.

Design Features :

• Type - Rectangular / Round
• Flanges standard   - As per customer requirement
• Available size - 100mm to 5000mm

Material of Construction :

• Body - MS IS 2062 / Stainless Steel AISI 304 / 316 / 310
• Gate - MS IS 2062 / Stainless Steel AISI 304 / 316 / 310
• Gland - MS IS 2062 / Stainless Steel AISI 304 / 316 / 310
• Shaft - EN 8 / SS AISI 410 / 304 / 316

Mode of Operation :

• Geared hand wheel
• Electrical actuator
• Pneumatic actuator / cylinder

Applications :

• Cement plants
• Power plants
• Sugar industries
• Pulp and paper industries
• Water and sewage plants

Rotary Air Valves regulate the flow of material from one chamber to another while maintaining a good airlock condition. Common uses of Rotary Air Valves includedischarge of powdery materials at dust collector, storage bins and pneumatic conveying application.

Ash intake valve Used to intake ash form hopper into a vacuum conveying system. An ash intake valve mounts directly below the hopper outlets. The modular design allows the same valve to be used regardless of hopper outlet or conveying line size. The ash intake valve is cylinder operated with a manual override feature .which allows for local operation of the valve without applying electric power to the system.

Size : up to 300 NB conveying line with custom end connection & adopters

Applications :

• Cement plants
• Power plants
• Ash handling systems

As we know the value of quality raw materials, we source them only from dependable vendors. By applying such inputs, we make sure that our finished goods remain flawless. As a trustworthy supplier, we take pride in presenting our customers with excellent quality Blow Poppet Valve. Pneumatically piston operated Blow Poppet Valve, which is used in pneumatic conveying system for suppling purging air into the ash translation & Hopers.

Sizes : 25NB 40NB 50NB 100NB.

SEI" Double Disc valves were designed to for on/off service in venting and conveying lines on high pressure pneumatic conveying applications. The design is rugged and clean operating. The Double disc valve ha metal to metal sealing to reduce wear in venting and discharge applications. The internal linkage drives the two spring loaded disks against the lapped body endplates. The disks move along a unique path and rotates with each stoke of the air cylinder which distributes the wear evenly and extends the life of the disks and endplates. "SEI" Double.

More About Information for

• Gate Valve : The most common and traditional type of valve is a gate valve. The Gate Valves are large to accommodate the yoke and stem mechanism, but fully open the full bore design provides an uninterrupted flow path. Generally either used fully open or closed, for on/off isolation.
• Globe Valve : Globe valves are designed for flow control or on/off isolation of fluids. Globe Valves are manufactured in straight patterns, angle patterns, oblique patterns and needle designs with a large variety of internal seat construction variants to handle high flow control duties. A wide choice of metal body options and trims means globe valves are widely used throughout industry. Globe Valves have a high flow resistance.
• Check Valve : Swing check valves are ideally suitable for vertical and horizontal application. A range of Check Valves (Non-Return Valves) suitable for oil, gas, water, refining, power and chemical applications where the prevention of flow reversal is mandatory. Dual Plate, Wafer Check Valve has One Piece cast heavy stronger Body configuration provides reduced weight and size compare to a swing check valve or lift check valve. This results savings in Initial cost, space and pipe support element installation. Wafer Type Check Valve has short face-to-face dimensions and low weight allows a simple space saving installation between the companion flanges. The valves are suitable to mounting between weld neck or slip on type companion flanges of different standards.They are specially developed for applications where a low-pressure loss is essential. Lift Type Check Valves are designed to reduce the flow resistance and pressure drop to the minimum possible extend. Lift check valves are suitable to mount in horizontal position only.

features & benefits:

• compact design.
• self-aligning gland box.
• 316 s/s valves for unrivaled corrosion protection.
• one piece integral cast body, chest and lugs.
• full port flow.
• high flow rates with low pressure drops.
• gate guides to support gate.
• a range of body & gate material options available.
• complies with mss sp-81 face-to-face dimensions.
• all valves are pressure tested to mss sp-81.
• maintenance friendly.

.

The range varies from wafer type lift & swing type non-return valve. Casting Non Return Valves are field suited and available in a range of 15 NB to 100 NB. Flanged and screwed. The Non Return Valves are designed to ensure full flow, efficient function, and minimum pressure drop across the valve. The size range of our Non Return Valve is 15 NB to 100 NB.

The segregating valve from "SEI" provides high performance isolation of pneumatic lines in vacuum conveying systems. The floating Gate design and wear-resistant components provide superior sealing for optimum system performance. The "SEI" segregating valve is engineered for trouble-free installation, inspection and maintenance. Only the valve components require routing maintenance, so the volvebody keeps its like-new performance month after month, year after year. Size 50mm to 200mm for standard range.

Size Range : 50NB To 800NB

Dome valve actuator are easily inter changeable with any imported , any make dome valve & Chinese valve . Actuator construction is simple and reliable changing the straight motion into rotational motion. That is why actuator has less wearing parts. Large bearing surfaces are securing long life cycle. Actuator functions are exact and clearance-free.

Actuator type

• Single acting
• Double acting

Technical specification

• Max operating pressure - 1 MPa (10 bar)
• Operating media - Air, neutral gas
• Operating Temperature : -10^oC - +100^oC
• Spring return - Coil springs
• Rotary : - 90^o (- +2^o)
• Torque - upto 600 N-m

We are manufacturing wide range of Valve automation system which includes single acting Pneumatic actuator, Double acting Pneumatic Actuator, Regulating actuator, Stainless steel actuator, 180 Degree actuator, Rotary actuar. Sunaina offers Actuators with Hard anodized Aluminum, Epoxy coated actuator with compact & light construction in nature.

Swing type check valve Check Valves are mainly used for forward flow only in piping line and are fit for service in horizontal or vertical piping. The unique design ensures the smooth functioning of valve with a very minimal differential pressure from either side.

Types Available :

• Lift
• Swing
• Disc type check valve
• Wafer Check Valve

Disc type check valveDisc Check Valve is available in sizes ranging from 15 MM to 250 MM. Our Non Slam Disc Check Valve is precisely designed keeping international quality standards in mind.

Specifications :

• MOC - SS 304 ( CF8 ) / SS 316 ( CF8M )
• Pressure Rating - PN 10 / PN 16 / PN 20/ 125# /150# / 300#
• Ends - Wafer / Screwed End
• Size - 1 1/2” ( 15 MM) TO 10” ( 250 MM )

Wafer Check ValveWafer Check Valve have Compact design, corrosion resistant and durability are some of the main highlights of our Industrial Wafer Check Valve.

Specifications :

• Design - Single Plate / Dual Plate
• MOC - C.I / M.S / C.S / SS 304 ( CF8 ) / SS 316 ( CF8M ) SS 316 L ( CF3M )
• Pressure Rating - PN 10 / PN 16 / PN 20/ 125# /150# / 300#
• Size - 1” ( 25 MM) TO 24” ( 600 MM )

Automatic handling, storage, and distribution of the products become easy with our automated warehousing system. Also, our storage facility is timely upgraded to meet the changing market scenario. With the help of our modern transit facility, we are capable of delivering the orders at the desired place with ease.

 

Details

• Size - 15MM TO 400MM
• Drilled To Any Standard – DIN, ANSI, BS, IS, OR As Required.
• PRESSURE UPTO 25 BAR – In Closed & Open Position
• Sleeve Options – Neoprene, Natural, Hypalone, Epdm, Viton,
• Operation - Manual/Pneumatic Cylinder
• Option –  I 2 P Convertor Along With Positioner- 4 To 20 Ma

Manual Over Drive High Abrassion Resistant – Special Invented – Highly Elastic, Special Extra High Pressure Moulded (Five Times Better Abrassion Resistant & Long Life than Any Rubber Sleeve)

Rotary Air Valves regulate the flow of material from one chamber to another while maintaining a good airlock condition. Common uses of Rotary Air Valves include discharge of powdery materials at dust collector, storage bins and pneumatic conveying application. Our Rotary Feeder & Rotary Airlock Valve is available in various rotation speeds ranging from 20-50 rpm.