Our Products
These pumps are designed for underwater applications so need of priming and foot valve. In addition to this, these pumps can withstand wide voltage fluctuations from 200-440 V. These submerged pumps are widely used in wells, sumps, water – tanks as well as Water for gardening, sprinklers and conventional irrigation
Feature
Application
CW pump body of stainless steel, impeller is of cast iron, class of insulation F type and ingress protection IP68. This pump widely used in basements of residential and commercial buildings, civil and industrial construction sites, mines and municipal or rural management projects.
Features
Application
SW pump body of stainless steel, impeller is of Noryl, class of insulation F type and ingress protection IP68. This pump has thermal overload protector prevents burning due to overload condition. .
Features
Applications
BW pump body of stainless steel, impeller is of cast iron, class of insulation F type and ingress protection IP68. This pump has thermal overload protector prevents burning due to overload condition.
Features
Applications
The entire pump is built with stainless steel, right from body to the impeller and shaft, making it light and resistant to corrosion. This pump is sealed mechanically from both inside and outside, preventing electrical and water leakage during its operation and enhancing life of the pump. Positioning the suction at the bottom edge of the pump facilitates removal of water, right up to the bottom level.
Feature
Application
These are single suction pumps with overall non clogging impeller. Pump can be officered in stationary as well as transportable arrangements. The stationary arrangement is supplied with pump connector unit and connector unit is connected to pump support bracket with rubber diaphragm to make it leak proof joint.
Features
Applications
Kirloskar KOS pump is an openwell submersible pump in cast iron construction. It has wide applications in agriculture and domestic segment.
Feature
Application
Kirloskar KOS N pump is an openwell submersible pump in stainless steel motor body construction. It has wide applications in agriculture and domestic segment. Designed for underwater applications with CED coated wetted components for long life and rust free operation.
Feature
Application
These pumps are designed for underwater applications and hence no need of priming and foot valve. These are easy to install and can withstand voltage variation from 350-440 volts. These are designed to prevent overloading and motor burning. These pumps find great use in submerged pumps in fountains, wells, sumps, and water links, water supply for domestic use in high rise apartments and in industries for clear water handling. Designed for underwater applications with CED coated wetted components for long life and rust free operation.
Feature
Application
These pumps have low power consumption. Designed for optimum efficiency these pumps are suitable for oil & water filled motor. Less vibration and lower noise level due to dynamic balancing of rotating parts makes these pumps very popular in Domestic and industrial water supply, Sprinkler and drip irrigation systems, Farm houses, Nurseries and gardening and Booster systems. This is a energy efficient, easy to install pump with corrosion and abrasion resistant parts.
Feature
Application
Motor
Material of Construction
These pumps have low power consumption and are designed for optimum efficiency. These can be installed with HDPE/UPVC/ GI pipes. These pumps can be used in booster systems, farm house, nurseries and gardening, dire-fighting system and so on.
Feature
Application
Is multi-utility pump features a stainless steel motor body which is easily rewound.
Feature
Application
Material of Construction
With a capacity of pumping up to 1200 litres per minute, Kirloskar KS6 submersible pumps suitable fulfill the need for high volumes of water in agricultural applications. The pumps combine the best in design and built so as to provide high operational efficiency, performance and durability.
Feature
Application
With a capacity of pumping up to 2100 litres per minute, Kirloskar KS7 submersible pumps suitable fulfill the need for high volumes of water in agricultural applications. The pumps combine the best in design and built so as to provide high operational efficiency, performance and durability.
Feature
Application
With a capacity of pumping up to 2800 litres per minute, Kirloskar KS8 submersible pumps suitable fulfill the need for high volumes of water in agricultural applications. The pumps combine the best in design and built so as to provide high operational efficiency, performance and durability.
Feature
Application
With a capacity of pumping up to 3000 litres per minute, Kirloskar KS9 submersible pumps suitable fulfill the need for high volumes of water in agricultural applications. The pumps combine the best in design and built so as to provide high operational efficiency, performance and durability.
Feature
Application
These pumps are featuring stainless steel construction and efficient design, the motor adds to the performance and longevity of the pump. The motor is also designed to perform optimally within a wide input voltage range 180 to 240 volts to offset voltage fluctuations.
Feature
Application
These pumps have better life in acidic water. Better surface finish promises better efficiency and consistent performance. These pumps have better life in sandy water. These are widely used in fire fighting application, continuous water supply for farming, irrigation, water supply for industry and housing complex and so on.
Feature
Application
These are single stage, single suction pumps with overhung non-clogging impeller. Pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with pump connector unit and the connector unit is connected to pump support bracket with rubber diaphragm to make it leak proof joint.
Features
Applications
Kirloskar SHS is sump pump for solid handling Applications. It is suitable for pit depth upto 9 metre.
Applications
Kirloskar 'SP' Series Pumps are of non clog and self priming type. They are used in various marine, industrial, civil construction, mobile machinery and public utilities Applicationss.
Features
Applications
‘KOSi’ pumps are designed to address specific needs of the Indian consumers. KOSi pumps boast of a lightweight and compact design, reduce energy consumption significantly and efficiently address electric overload issues caused due to fluctuating power supply. Additionally, customers can enjoy a better performance with KBL’s proven industry standard certification for enhanced reliability.
Feature
Application
These pumps are developed for process Applicationss and are generally conforming to API 610. These are gland packed or mechanically sealed. These pumps are ideal for air conditioning, condensate extraction, distilleries, edible oil sugar and textile. Delivery size ranges from 20 mm to 200 mm.
Features
Applications
Kirloskar KOS+ M pump is an openwell submersible pump in cast iron construction. It has wide applications in agriculture and domestic segment.
Feature
Application
These pumps are designed for underwater applications so need of priming and foot valve. In addition to this, these pumps can withstand wide voltage fluctuations from 200-440 V. These submerged pumps are widely used in wells, sumps, water – tanks as well as Water for gardening, sprinklers and conventional irrigation.
Feature
Application