Steel & Steel Products

Leading Manufacturer, Supplier & Retailer of Steel Cut Wire Shots.

Steel Cut Wire Shots

Material Stainless Steel
Condition New
Application Shot Blasting
Feature Corrosion Resistance, High Quality

We are counted amongst the prominent stainless steel Cut Wire Shot Suppliers in India. Cut Wire Shots are made of cold drawn steel wire are obtained by cutting wire into lengths equal to the wire diameter, and then making it round, if necessary through the conditioning (rounding) process. The quality is assured in cut wire shot because the wire from which it has been manufactured, is heat treated and cold drawn to achieve hardness and homogeneity. A distinct advantage is that the Cut wire shots do not fracture, break or powder while in use. We also provide Wholesale Steel Cut Wire Shots at the most prolific deals. Technical & Physical Specifications

Cut wire shots are manufactured as per IS 5873/1970.
Manufactured using of spring steel wire with
- Carbon contents : 0.4% to 0.85%
- Uniform hardness : 400 To 500 HV
- Grade II as per IS 4454

Available In

Cut Form: Due to its sharp edge, it is ideal for cleaning where speed of cleaning is critical and somewhat rough finish is acceptable.
Conditioned Form: Rounded off through a conditioning process. It is generally used in shot peening process and in industries such as aerospace, shipping, automotive. Cut wire shots are used for cleaning, deburring, descaling, shot peening on components of iron and steel. Depending upon the applications, various hardness ranges are available.

Advantages of Cut Wire Shots

Lower surface contamination
Do not break, hence no dust
Reduce the cost of break down and maintenance
Reduce the processing time in peening/blasting
Give Smooth and bright finish
Double the life as compared to steel shots approximately
Available in equal hardness and sizes
Whole bodied shot with no scales or oxides present

Specifications

Chemical Composition	Carbon : 0.4 to 0.85 Manganese : 0.7 to 1.0 Sulphur : 0.021 MAX Phosphorous : 0.025 Max Silicon : 0.2 to 1.1
Hardness	Uniform Standard hardness 40 - 50 RC High Hardness 50-60 RC
Sizes	0.5mm to 2.5mm
Shapes	As- cut and Conditioned
Microstructure	Tempered Martensite
Porosity	Nil
Blow holes and Tails	Nil
Minimum density	7.8 g/cm3
Tensile Strength	160 / 180 Kg. mm2
Packing available	25 kgs. Double lined HDPE Bags.