Navi Mumbai, Maharashtra, India
Our Products
Range from -35C to 650C
Resolution: 0.1C / 0.01C
Stability: up to 0.03C
Our easy to transport and sturdy calibrators with laboratory accuracy for all areas of applicationIn test bays and development laboratories, temperature sensors have to be tested, adjusted or recalibrated before installation.In sensor production, tolerances of thermocouples and resistance thermometers can be determined and documented clearly only by calibrationControl panel with graphic display and keyboard
DISPLAY
Block temperatureSet temperatureTest piece temperatureComputer interface RS 232 CPrecision measuring instrument also easily retrofittableControl panel with graphic display and keyboard.
INTRODUCTION
The SIKA UC mAV is a hand-held process calibrator (conforming toEC standards). It is more particularlyintended for calibration and maintenance. It can measure and generate electrical quantities either on siteor in the laboratory. It fulfils voltage and current measuring and generation functions (DC or LF rampsignals) and a continuity test (on passive loop).
Owing to its monitoring (regulation) mechanism in transmission mode, the instrument cannot takemeasurements and transmit simultaneously.
APPLICATION
Display of results in accordance with a linear conversion law or not.
Generation of increments, single or cyclic ramp signals.
Its utilisation is facilitated by a series of improvements
Fast access to all the functions.
Intuitive user interface.
Graphic display of 160x160 pixels
Connection by 4-mm safety sockets.
Powered by 4 AA batteries or a rechargeable battery pack with fast internal charger (Option).
The instrument is enclosed in an ABS casing with an elastomer sheath.
CHARACTERISTICS
Hand-held instrument energized by 4 AA batteries (1.7 Ah Ni-MH battery pack on option).
Wrist-strap for carrying and use on sites
Graphic 160 x 160 pixel liquid crystal display (LCD).
Choice of language of the messages and programming functions, ranges and parameters on 6-key keypad + 1 navigator.
Display backlighting accessible via the keypad, with the possibility of programming automatic extinction after a given period of inactivity.
Presentation: ABS casing (elastomer sheath on option).
Dimensions: 157 mm x 85 mm x 45 mm (without sheath).
Weight: 306 g without sheath.
Sealing IP54 in accordance with standard EN 60529
UC mAV is compatible with HART transmitters by inserting a 250 resistance which doesn't disturb digital data transfer.
