Our Products
This series is for moulding containers, pallets, jerry cans drums from 5 liters up to 100 liters, etc. It is equipped with a resin ram acccumulator & one - stage perison control. perison injector obtains uniform thickness in seconds.
The SEW machines are single and double station blow moulding with or without de - flashing systems are a console and unitized, making it exceptionally easy to customize the machine to meet your exact needs.
All electronic processing & safety controls are organised on a single console that features an easy to read display of the open construction, premium quality parts & precision workmanship, all contribute to its low maintenance design & minimum use of spare parts.
The flexibility of these machines is remarkable for production versatility , engineered for consistent efficiency, & manufactured for lasting value at low cost.
We provide choice of single or double station with or without de-flashing machine in different models with options of viewing strip machines, hot wire - cutter, bottom blowing system, angular blowing attachment, multi point perison control extruders with bigger diameters.
Model | (units) | SEW-40 | SEW-45 | SEW-50 | SEW-65 | SEW-65 |
---|---|---|---|---|---|---|
Capacity | Litre. | 1 | 2 | 5 | 10 | 20 |
Material to be use | - | HD/PVC | HD/PP | HD/PP | HD/PP | HD |
Screw diameter | MM | 40 | 45 | 50 | 65 | 65 |
L/D ratio | L/D | 22:1 | 22:1 | 22:1 | 24:1 | 24:1 |
Extrude Capacity | Per/Kg | 20 | 25 | 30 | 45 | 45 |
Screw Speed | RPM | 40 | 40 | 40 | 45 | 45 |
Heating zone | Nos. | 5 | 5 | 5 | 6 | 6 |
Accumulator capacity | Kg | - | - | - | - | 2.5 |
Extrude motor | HP | 3 | 3 | 5 | 10 | 15 |
Hydradulic motor | HP | - | - | 3 | 7.5 | 10 |
Max. Daylight opening | MM | 250 | 300 | 350 | 400 | 800 |
Min. Daylight opening | MM | 100 | 100 | 100 | 150 | 200 |
Power consumption | HP | 18 | 20 | 25 | 35 | 50 |
Air flow | Ltr./Min | 80-100 | 80-100 | 100-120 | 120-500 | 300-400 |
Air pressure | kg/cm2 | 3-5 | 3-5 | 5-7 | 5-7 | 6-8 |
Water Flow | Ltr./Min | 20-30 | 20-30 | 20-30 | 30-40 | 80-100 |
Machine weight(Approx.) | Tone | 0.8 | 0.9 | 1.5 | 2 | 3 |
Dimension of machine | Feet | 5x3x5 | 5x3x5 | 5x4x6 | 9x7x7 | 15x8x14 |
SEW plastic Scrap Grinders are specially designed to suit every kind of plastic processing job involving grinding of plastic waste for reclaining and converting it into fine granules.
Suitable for all type of plastic material PVC, LD, HD, HM, PP, ABC, HIPS, Blow moulding articles.
M/C Model | Capacity Kg./Hr | MAIN DRIVE | DIMENSION OF PLANT in mts (L X W X H ) |
---|---|---|---|
SEW / 12 SG | 100 kg | 7.5 kw | 1 x 1 x 2 |
SEW / 15 SG | 150 kg | 11 kw | 1 x 1 x 2 |
SEW / 18 SG | 180 kg | 15 kw | 1 x 1 x 2 |
SEW / 24 SG | 120 kg. | 18.5 kw | 1.5 x 1.5 x 2 |
Suresh Engineering Works with it's continue research and development is first to develop indigenous Inline drip line machine in India. Drip irrigation is an efficient method of applying water and nutrition to crop. Inline drip line irrigation is most effective in fruits, vegetables and flowers.
Model | SEW 50 IDM | SEW 65 IDM |
---|---|---|
Screw Dia | 50 mm | 65 mm |
LD Ratio | 30:1 | 30:1 |
Main Drive | 18.75 KW | 22.50 KW |
Gear Box | Helical | Helical |
Output | Max. 60 kg/hour | Max. 120 kg/hour |
Pipe Diameter in mm | Min 12mm / Max 20 mm | Min 12mm / Max 20 mm |
Wall tdickness in mm | Min 0.80mm / Max 1.30 mm | Min 0.80mm / Max 1.30 mm |
Raw material | LLDPE,LDPE, HDPE | LLDPE,LDPE, HDPE |
Line Speed Max. | 30m/min | Max. 60m/min |
Dripper Inserting | Upto 90 dispenser/min | Upto 180 dispenser/min |
Perforating | By Electric Motor | By Electric Motor |
Connected Load | 38 KW | 48 KW |
Air pressure | 8 Kg/cm2 | 14 Kg/cm2 |
Space requirement | L16 /W4.5 / H4.5 mtr | L22 / W4.5/ H4.5 mtr |